Re: [hylafax-users] Unknown problem (check modem power)

[Michele Petrazzo <michele.petrazzo@xxxxxxxxx>]

Lee Howard wrote:
> Michele Petrazzo wrote:
>
> > Hi list,

> > This is the log:
> >
> > Feb 22 12:36:12.34: [14491]: <-- [20:ATX3DT0,0432XXXX@\r] 
> > Feb 22 12:39:12.34: [14491]: SEND FAILED: JOB 9267 DEST 0,0432XXXX ERR 
> > Unknown problem (check modem power)
>
> The modem reset itself after the dial.  (Such is the fun that comes
> with USR modems.)  That said, your dial command is a bit complicated,
> and the dial command could be triggering the fault in the modem.  Try
> using a more simple dial command and see if the same fault occurs.
>
> Lee.

Excuse me, but where it is so complicate?
ATX3DT0,number@ it's so complicate for a modem that cost 100€?
If I remove the "complications" (X3 and @), I can sand fax!

P.s. This problem happen one time every 20 (about). I'm doing too hard
work for this modem?

Thanks,
Michele


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*