![]() |
It is an old USR ISA card. That is hardwired to COM1 and being used without any drivers. I pasted the commands you sent to the bottom of the modem config file, restarted the server and had the same problem. Any other thoughts? Thank You Sim Zacks IT Manager CompuLab 04-829-0145 - Office 04-832-5251 - Fax ________________________________________________________________________________ Sim Zacks wrote: >Feb 15 15:45:09.90: [ 5705]: HylaFAX (tm) Version 4.2.3 >Feb 15 15:45:09.90: [ 5705]: <-- [13:AT+FCLASS=1A\r] > >Feb 15 15:45:25.59: [ 5705]: <-- [11:AT+FRM=146\r] >Feb 15 15:45:26.51: [ 5705]: --> [7:CONNECT] >Feb 15 15:45:26.80: [ 5705]: RECV received frame number 0 >... >Feb 15 15:45:45.53: [ 5705]: RECV received frame number 124 >Feb 15 15:47:30.71: [ 5705]: Timeout receiving HDLC frame >Feb 15 15:47:34.31: [ 5705]: Timeout awaiting synchronization sequence >Feb 15 15:47:34.31: [ 5705]: Bad HDLC terminating flag received. >Feb 15 15:47:37.00: [ 5705]: Timeout awaiting synchronization sequence >--Last 2 lines repeated over 50 times >Feb 15 15:51:22.22: [ 5705]: MODEM <Empty line> >Feb 15 15:51:24.23: [ 5705]: MODEM <Empty line> >Feb 15 15:51:26.23: [ 5705]: MODEM <Empty line> >Feb 15 15:51:26.23: [ 5705]: <-- [9:AT+FRH=3\r] >Feb 15 15:51:26.36: [ 5705]: --> [8:AT+FRH=3] >Feb 15 15:51:26.36: [ 5705]: <-- [9:AT+FRH=3\r] >Feb 15 15:51:26.37: [ 5705]: --> [13:EAT+FRH=3RROR] > This looks like a USR modem. Is it? If it is you can probably work around the modem firmware problem you're hitting here by setting: Class1PPMWaitCmd: "<delay:7>" Class1TCFWaitCmd: "<delay:7>" Class1EOPWaitCmd: "<delay:9>" Class1SwitchingCmd: "<delay:7>" In your modem config file. Lee. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*