Re: [hylafax-users] Sending multiple faxes simultaneously with eicon diva 4BRI

[Aivils Stoss <aivils@xxxxxxxxxxx>]

On Pirmdiena, 6. Februāris 2006 16:53, Waqar Sheikh wrote:
> I am using hylafax with eicon diva 4BRI card. I have interfaced the card to
> HylaFAX using the TTY interface that the eicon driver provides. If I plug
> the ISDN cable in the first port of the card, every thing works fine. But
> HyaFAX does not send when the cable is pluged into any of the other ports.
> It says something like "no dialtone".
>
>  But if  I plug two cables (Port 1 and Port2) into the card, then HylaFAX
> does not complain.

All devices /dev/ttyds01 - /dev/ttyds08 must be figured out. Fax
sender cannot detect port , which have connection, all 4 ports must be
connected to ISDN network.

Aivils Stoss

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*