[hylafax-users] Is this a remote hang up?

[Stephen Carville <stephen@xxxxxxxxxxxxxx>]

Can someone give me hint as to what happened here?  It looks to me like 
the remote side just hung up on me.

==========================================================

An attempt to receive facsimile on ttyM1c failed because:

    T.30 T2 timeout, expected signal not received

    ---- Transcript of session follows ----

Jan 25 06:01:03.59: [27419]: SESSION BEGIN 000048856 18003853308
Jan 25 06:01:03.59: [27419]: HylaFAX (tm) Version 4.2.2beta5
Jan 25 06:01:03.59: [27419]: <-- [4:ATA\r]
Jan 25 06:01:13.77: [27419]: --> [7:CONNECT]
Jan 25 06:01:13.77: [27419]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyM1c'
Jan 25 06:01:13.77: [27419]: RECV FAX: begin
Jan 25 06:01:13.84: [27419]: --> [7:CONNECT]
Jan 25 06:01:13.90: [27419]: --> [7:CONNECT]
Jan 25 06:01:16.17: [27419]: --> [2:OK]
Jan 25 06:01:16.17: [27419]: <-- [9:AT+FRH=3\r]
Jan 25 06:01:16.45: [27419]: --> [7:CONNECT]
Jan 25 06:01:18.16: [27419]: --> [2:OK]
Jan 25 06:01:18.16: [27419]: REMOTE TSI "7012226717"
Jan 25 06:01:18.16: [27419]: <-- [9:AT+FRH=3\r]
Jan 25 06:01:18.22: [27419]: --> [7:CONNECT]
Jan 25 06:01:18.51: [27419]: --> [2:OK]
Jan 25 06:01:18.51: [27419]: REMOTE wants 14400 bit/s
Jan 25 06:01:18.51: [27419]: REMOTE wants A4 page width (215 mm)
Jan 25 06:01:18.51: [27419]: REMOTE wants unlimited page length
Jan 25 06:01:18.51: [27419]: REMOTE wants 3.85 line/mm
Jan 25 06:01:18.51: [27419]: REMOTE wants 2-D MMR
Jan 25 06:01:18.51: [27419]: REMOTE wants T.30 Annex A, 256-byte ECM
Jan 25 06:01:18.51: [27419]: RECV training at v.17 14400 bit/s
Jan 25 06:01:18.51: [27419]: <-- [11:AT+FRM=145\r]
Jan 25 06:01:20.28: [27419]: --> [7:CONNECT]
Jan 25 06:01:21.83: [27419]: RECV: TCF 2816 bytes, 0% non-zero, 2789 
zero-run
Jan 25 06:01:21.83: [27419]: --> [10:NO CARRIER]
Jan 25 06:01:21.83: [27419]: DELAY 75 ms
Jan 25 06:01:21.91: [27419]: TRAINING succeeded
Jan 25 06:01:21.92: [27419]: <-- [9:AT+FTH=3\r]
Jan 25 06:01:22.92: [27419]: --> [7:CONNECT]
Jan 25 06:01:23.36: [27419]: --> [2:OK]
Jan 25 06:01:23.36: [27419]: <-- [11:AT+FRM=146\r]
Jan 25 06:01:24.26: [27419]: --> [7:CONNECT]
Jan 25 06:01:24.67: [27419]: Bad HDLC terminating flag received.
Jan 25 06:01:24.67: [27419]: RECV assumed RCP frame with block end
Jan 25 06:01:24.67: [27419]: --> [10:NO CARRIER]
Jan 25 06:01:24.67: [27419]: <-- [9:AT+FRH=3\r]
Jan 25 06:01:34.73: [27419]: --> [10:NO CARRIER]
Jan 25 06:01:34.74: [27419]: MODEM No carrier
Jan 25 06:01:34.74: [27419]: RECV FAX: T.30 T2 timeout, expected signal 
not received
Jan 25 06:01:34.74: [27419]: <-- [9:AT+FTH=3\r]
Jan 25 06:01:34.74: [27419]: RECV FAX (000048856): 
recvq/fax000041862.tif from 7012226717, route to <unspecified>, 0 pages 
in 0:21
Jan 25 06:01:35.75: [27419]: --> [7:CONNECT]
Jan 25 06:01:36.19: [27419]: --> [2:OK]
Jan 25 06:01:36.19: [27419]: RECV FAX (000048856): session with 
7012226717 terminated abnormally: T.30 T2 timeout, expected signal not 
received
Jan 25 06:01:36.19: [27419]: RECV FAX: bin/faxrcvd 
"recvq/fax000041862.tif" "ttyM1c" "000048856" "T.30 T2 timeout, expected 
signal not received"
Jan 25 06:01:36.19: [27419]: RECV FAX: end
Jan 25 06:01:36.19: [27419]: SESSION END

--
Stephen Carville <stephen@xxxxxxxxxxxxxx>
Unix and Network Admin
Nationwide Totalflood
6033 W. Century Blvd
Los Angeles, CA 90045
310-342-3602

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*