[hylafax-users] faxsend does not start.

[Waqar Sheikh <waqshk@xxxxxxxxx>]

 
I am trying to configure an Eicon DIVA 4BRI card with hylafax.
I am currently using both CAPI 2.0(/dev/capi20) and the tty(/dev/ttyds01) interfaces of the driver.

Faxgetty does not seem to work with the /dev/capi20 file as it puts the following lines in /var/log/messages:
-------------------------------------------------------------------------------------------------------------------
FaxGetty[3445]: OPEN /dev/capi20  HylaFAX (tm) Version  4.2.5
FaxGetty[3445]: /dev/capi20: Can not initialize modem.
-------------------------------------------------------------------------------------------------------------------
But it opens /dev/ttyds01 fine :
-------------------------------------------------------------------------------------------------------------------
FaxGetty[3456]: OPEN /dev/ttyds01  HylaFAX (tm) Version 4.2.5
FaxGetty[3456]: Purge stale UUCP lock /var/lock/LCK..ttyds01
FaxGetty[3456]: MODEM EICON TECHNOLOGY CORP. DIVA Unix ISDN                               Modem/Version 1.
-------------------------------------------------------------------------------------------------------------------

I am recieving faxes normally and with no problems. The problem is with sending. When I do a "sendfax"  this  is the  result:
-------------------------------------------------------------------------------------------------------------------
FaxQueuer[3077]: SUBM IT JOB 68
FaxGetty[3456]:    LOCKWAIT
FaxGetty[3456]:    MODEM EICON TECHNOLOGY CORP. DIVA Unix ISDN                             Modem/Version 1.
-------------------------------------------------------------------------------------------------------------------
What I think is that after Faxgetty does a LOCKWAIT, a process known as "faxsend" should be started which does the actual transmission of the fax. 

The log at the other side says:
------------------------------------------------------------------------------------------------------------
FaxGetty[31706]: MODEM ROCKWELL AC/K56/V2.200-02-V90_2M_DLS
FaxGetty[31706]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
FaxGetty[31706]: RECV FAX (00000173): from , page 1 in 0:14, INF, 3.85                                    line/mm, 1-D MR, 9600 bit/s
FaxGetty[31706]: RECV FAX (00000173): recvq/fax00026.tif from , route to                                    <unspecified>, 1 pages in 0:54
FaxGetty[31706]: RECV FAX (00000173): session with  termina ted abnormally:                           Unspecified Phase C error, including too much delay between                           TCF and +FDR command
FaxGetty[31706]: RECV FAX: bin/faxrcvd "recvq/fax00026.tif" "ttyS0"                                        "00000173" "Unspecified Phase C error, including too much                                 delay between TCF and +FDR command" "" ""
FaxGetty[31706]: /dev/ttyS0: Can not initialize modem.
FaxGetty[31706]: MODEM ROCKWELL AC/K56/V2.200-02-V90_2M_DLS
------------------------------------------------------------------------------------------------------------

I would appreciate any help.

Waqar Sheikh,
Infinilogic.

---

Bring words and photos together (easily) with
 
PhotoMail  - it's free and works with Yahoo! Mail.