HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Page 2 missing

Hi Terry,

A generally good rule with TIFF is "if it looks wrong, try another viewer". Many TIFF viewers get the aspect ratio of FAXes wrong. Many will only display the first page. Many get centimetre/inch scaling issues wrong when printing.

There are lots of things which say they display TIFF. Few get it right.

Regards,
Steve


Terry D. Boldt wrote:

I just tried what you suggested - kind of like reading the manual before replying :-) - and the converted ps file does have both pages there. Don't really know why viewing the tiff file directly didn't show both pages.

Thanks agian,
Terry

On Thursday 12 January 2006 17:15, you wrote:


If you convert your tiff to ps with the command

tiff2ps

then you must call it with "-a" option (convert all pages)

tiff2ps -a ...............


On Thu, 12 Jan
2006 16:19:53 -0500 "Terry D. Boldt"

<fastsnip-hylafax1@xxxxxxxxx> wrote:


In receiving 2 page fax (cover page plus one page), the cover
page page was  stored, but page 2 is missing.

I  examined the log file, and accordig to the log file, both
pages were  received. I have appended the log file here.

Any ideas what happened to page 2?

Log File: (I have removed duplicate lines)

Jan 11 14:21:33.78: [ 4723]: SESSION BEGIN 000000036
13013305467 Jan 11 14:21:33.78: [ 4723]: HylaFAX (tm) Version
4.2.4 Jan 11 14:21:33.78: [ 4723]: <-- [4:ATA\r]
Jan 11 14:21:45.61: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:45.61: [ 4723]: ANSWER: FAX CONNECTION  DEVICE
'/dev/ttyS0' Jan 11 14:21:45.62: [ 4723]: RECV FAX: begin
Jan 11 14:21:45.65: [ 4723]: <-- data [32]
Jan 11 14:21:45.65: [ 4723]: <-- data [2]
Jan 11 14:21:47.64: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:47.64: [ 4723]: <-- data [23]
Jan 11 14:21:47.64: [ 4723]: <-- data [2]
Jan 11 14:21:48.47: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:48.47: [ 4723]: <-- data [13]
Jan 11 14:21:48.47: [ 4723]: <-- data [2]
Jan 11 14:21:49.12: [ 4723]: --> [2:OK]
Jan 11 14:21:49.12: [ 4723]: <-- [9:AT+FRH=3\r]
Jan 11 14:21:49.63: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:51.08: [ 4723]: --> [2:OK]
Jan 11 14:21:51.08: [ 4723]: REMOTE TSI "773 832 5299"
Jan 11 14:21:51.08: [ 4723]: <-- [9:AT+FRH=3\r]
Jan 11 14:21:51.10: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:51.35: [ 4723]: --> [2:OK]
Jan 11 14:21:51.35: [ 4723]: REMOTE wants 14400 bit/s
Jan 11 14:21:51.35: [ 4723]: REMOTE wants A4 page width (215
mm) Jan 11 14:21:51.35: [ 4723]: REMOTE wants unlimited page
length Jan 11 14:21:51.35: [ 4723]: REMOTE wants 3.85 line/mm
Jan 11 14:21:51.35: [ 4723]: REMOTE wants 2-D MMR
Jan 11 14:21:51.35: [ 4723]: REMOTE wants T.30 Annex A,
256-byte ECM Jan 11 14:21:51.35: [ 4723]: RECV training at v.17
14400 bit/s Jan 11 14:21:51.35: [ 4723]: <-- [11:AT+FRM=145\r]
Jan 11 14:21:53.08: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:54.62: [ 4723]: RECV: TCF 2727 bytes, 0% non-zero,
2699 zero-run Jan 11 14:21:54.62: [ 4723]: --> [10:NO CARRIER]
Jan 11 14:21:54.62: [ 4723]: <-- [9:AT+FRS=7\r]
Jan 11 14:21:54.73: [ 4723]: --> [2:OK]
Jan 11 14:21:54.73: [ 4723]: TRAINING succeeded
Jan 11 14:21:54.73: [ 4723]: <-- [9:AT+FTH=3\r]
Jan 11 14:21:54.77: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:54.77: [ 4723]: <-- data [3]
Jan 11 14:21:54.77: [ 4723]: <-- data [2]
Jan 11 14:21:56.08: [ 4723]: --> [2:OK]
Jan 11 14:21:56.08: [ 4723]: <-- [11:AT+FRM=146\r]
Jan 11 14:21:56.77: [ 4723]: --> [7:CONNECT]
Jan 11 14:21:58.47: [ 4723]: RECV received frame number 0
.
.
.
Jan 11 14:22:05.07: [ 4723]: RECV received frame number 44
Jan 11 14:22:05.22: [ 4723]: RECV received RCP frame
Jan 11 14:22:05.28: [ 4723]: --> [10:NO CARRIER]
Jan 11 14:22:05.28: [ 4723]: <-- [9:AT+FRH=3\r]
Jan 11 14:22:05.61: [ 4723]: --> [7:CONNECT]
Jan 11 14:22:06.66: [ 4723]: --> [2:OK]
Jan 11 14:22:06.66: [ 4723]: RECV recv PPS (partial page
signal) Jan 11 14:22:06.66: [ 4723]: RECV recv MPS (more pages,
same document) Jan 11 14:22:06.66: [ 4723]: RECV received 45
frames of block 1 of page 1 Jan 11 14:22:06.69: [ 4723]: RECV:
11329 bytes of data, 1067 total lines Jan 11 14:22:06.70: [
4723]: <-- [9:AT+FRS=7\r] Jan 11 14:22:06.81: [ 4723]: -->
[2:OK] Jan 11 14:22:06.81: [ 4723]: <-- [9:AT+FTH=3\r]
Jan 11 14:22:06.85: [ 4723]: --> [7:CONNECT]
Jan 11 14:22:06.85: [ 4723]: RECV send MCF (message
confirmation) Jan 11 14:22:06.85: [ 4723]: RECV FAX
(000000036): from 773 832 5299, page 1  in 0:21, INF, 3.85
line/mm, 2-D MMR, 14400 bit/s Jan 11 14:22:06.85: [ 4723]: <--
data [3] Jan 11 14:22:06.85: [ 4723]: <-- data [2]
Jan 11 14:22:08.16: [ 4723]: --> [2:OK]
Jan 11 14:22:08.16: [ 4723]: <-- [11:AT+FRM=146\r]
Jan 11 14:22:08.88: [ 4723]: --> [7:CONNECT]
Jan 11 14:22:10.58: [ 4723]: RECV received frame number 0
.
.
Jan 11 14:22:24.49: [ 4723]: RECV received frame number 93
Jan 11 14:22:24.49: [ 4723]: RECV received RCP frame
Jan 11 14:22:24.60: [ 4723]: --> [10:NO CARRIER]
Jan 11 14:22:24.60: [ 4723]: <-- [9:AT+FRH=3\r]
Jan 11 14:22:24.95: [ 4723]: --> [7:CONNECT]
Jan 11 14:22:25.98: [ 4723]: --> [2:OK]
Jan 11 14:22:25.98: [ 4723]: RECV recv PPS (partial page
signal) Jan 11 14:22:25.98: [ 4723]: RECV recv EOP (no more
pages or documents) Jan 11 14:22:25.98: [ 4723]: RECV received
94 frames of block 1 of page 2 Jan 11 14:22:26.06: [ 4723]:
RECV: 23947 bytes of data, 1068 total lines Jan 11 14:22:26.06:
[ 4723]: <-- [9:AT+FRS=7\r] Jan 11 14:22:26.17: [ 4723]: -->
[2:OK] Jan 11 14:22:26.17: [ 4723]: <-- [9:AT+FTH=3\r]
Jan 11 14:22:26.21: [ 4723]: --> [7:CONNECT]
Jan 11 14:22:26.21: [ 4723]: <-- data [3]
Jan 11 14:22:26.21: [ 4723]: <-- data [2]
Jan 11 14:22:27.52: [ 4723]: --> [2:OK]
Jan 11 14:22:27.52: [ 4723]: RECV send MCF (message
confirmation) Jan 11 14:22:27.52: [ 4723]: RECV FAX
(000000036): from 773 832 5299, page 2  in 0:20, INF, 3.85
line/mm, 2-D MMR, 14400 bit/s Jan 11 14:22:27.52: [ 4723]: RECV
FAX (000000036): recvq/fax000000024.tif from  773 832 5299,
route to <unspecified>, 2 pages in 0:42 Jan 11 14:22:27.52: [
4723]: <-- [9:AT+FRH=3\r] Jan 11 14:22:27.99: [ 4723]: -->
[7:CONNECT] Jan 11 14:22:28.88: [ 4723]: --> [2:OK]
Jan 11 14:22:28.88: [ 4723]: RECV recv DCN (disconnect)
Jan 11 14:22:28.88: [ 4723]: RECV FAX: bin/faxrcvd
"recvq/fax000000024.tif"  "ttyS0" "000000036" ""
Jan 11 14:22:28.88: [ 4723]: RECV FAX: end
Jan 11 14:22:28.88: [ 4723]: SESSION END

It would appear that the software "thought" it stored both
pages in  "recvq/fax000000024.tif". But only page one (the
cover page) is in the file.


--
++++++++++++++++++++++++++++++++++++++++++++++++++++++
======================================================
******************************************************
If you are always rushing towards the future,
Then you never have any past.

Terry Boldt
******************************************************
Paraphrasing Ben Franklin:

Those who sacrifice freedom for safety, have neither.

The exact quote:

They that can give up essential liberty to obtain a little
temporary safety deserve neither liberty nor safety.
 Benjamin Franklin (1706 - 1790),
 US author, diplomat, inventor, physicist, politician, &
 printer Historical Review of Pennsylvania, 1759

******************************************************

____________________ HylaFAX(tm) Users Mailing List
_______________________
To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx
< /dev/null
*To learn about commercial HylaFAX(tm) support, mail
sales@xxxxxxxxx*







____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions