Re: [hylafax-users] CL-MD56XX: Some faxe could be reveived, some not

["Manuel H." <thrashthrashthrash@xxxxxx>]

Hello, thank you for your answer!

I tried it with ATA and had the same results (some work but the most
faxes didn not receive. You said that the modem is not detecting any
HDLC signals from the sender? How could i check this? I don't understand
why i get some faxes and others can't be receive? This must be a setting
in the config.ttyS0???? Why do i get an "NO CARRIER" message in the log?
Would be a different modem a solution, or whats your advise?

Thank you, best wishes
m.




Am Mittwoch, den 04.01.2006, 09:53 -0800 schrieb Lee Howard:
> Manuel H. wrote:
> 
> >>Jan 03 13:00:22.31: [ 8402]: SESSION BEGIN 000000035 495312842085
> >>Jan 03 13:00:22.31: [ 8402]: HylaFAX (tm) Version 4.2.1
> >>Jan 03 13:00:22.31: [ 8402]: <-- [6:ATAX3\r]
> >>Jan 03 13:00:27.30: [ 8402]: --> [7:CONNECT]
> >>Jan 03 13:00:27.30: [ 8402]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
> >>Jan 03 13:00:27.30: [ 8402]: RECV FAX: begin
> >>Jan 03 13:00:27.30: [ 8402]: <-- data [32]
> >>Jan 03 13:00:27.30: [ 8402]: <-- data [2]
> >>Jan 03 13:00:28.67: [ 8402]: --> [7:CONNECT]
> >>Jan 03 13:00:28.67: [ 8402]: <-- data [23]
> >>Jan 03 13:00:28.67: [ 8402]: <-- data [2]
> >>Jan 03 13:00:29.43: [ 8402]: --> [7:CONNECT]
> >>Jan 03 13:00:29.43: [ 8402]: <-- data [10]
> >>Jan 03 13:00:29.43: [ 8402]: <-- data [2]
> >>Jan 03 13:00:29.88: [ 8402]: --> [2:OK]
> >>Jan 03 13:00:29.88: [ 8402]: <-- [9:AT+FRH=3\r]
> >>Jan 03 13:00:30.04: [ 8402]: --> [7:CONNECT]
> >>Jan 03 13:00:31.54: [ 8402]: --> [10:NO CARRIER]
> >>
> 
> (log repeats the same thing over and over)
> 
> Firstly, what's the ATAX3 for?  Why do you have ModemAnswerCmd set to 
> ATAX3 and not just ATA?  My modem manuals indicate that all of the ATXn 
> commands are intended for dialing (sending) and not answering 
> (receiving).  So I'd guess that the behavior they'd cause in the wrong 
> application would be unexpected.
> 
> Anyway, the rest of the log tells us that the modem is unable to detect 
> any HDLC signalling from the sender... which surely isn't the fault of 
> the sender.  So the modem isn't doing what it's supposed to... possibly 
> because of that X3.  Possibly due to other things.
> 
> If you have a different modem try that if removing the X3 doesn't help.
> 
> Lee.
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*