Re: [hylafax-users] Sendtime hyla.conf (more)

[Tony Delov <tony.delov@xxxxxxxxxxxxxxx>]

> This is strange.
> 
> You're using sendfax, right?  

Yes, I'm using sendfax for my tests; although, once I get it working, 
its really the delay & batching (and grouping) of email-to-faxes that 
I need to get working. 

> Can you please post the output when you 
> add "-vv" to your sendfax command when it works and also for when it 
> doesn't work?  Comparing those two outputs should reveal the difference 
> there.
> 
> Lee.

#####################################################################
This is the output + some date & faxstat commands at the same time:
#####################################################################
[tdelov@melittdelov ~]$ date ; date -u ; sendfax  -vv -n -a 'now + 1 minute' -d 111 -d 111 /etc/passwd  ; faxstat -s
Wed Dec 21 08:29:29 GMT 2005
Wed Dec 21 08:29:29 UTC 2005
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.localdomain.
220 melittdelov.gribbles.com.au server (HylaFAX (tm) Version 4.2.3.1) ready.
-> USER tdelov
230 User tdelov logged in.
match against (..., 512)
rule: offset 0 string = "%!" -- failed (comparison)
rule: offset 0 short = 0x4d4d -- failed (comparison)
rule: offset 0 short = 0x4949 -- failed (comparison)
rule: offset 0 short = 0x1da -- failed (comparison)
rule: offset 0 short = 0x1f1e -- failed (comparison)
rule: offset 0 short = 0x1f9d -- failed (comparison)
rule: offset 0 short = 0x506 -- failed (comparison)
rule: offset 0 short = 0x5343 -- failed (comparison)
rule: offset 0 short = 0xf702 -- failed (comparison)
rule: offset 0 string = "GIF" -- failed (comparison)
rule: offset 0 long = 0x59a66a95 -- failed (comparison)
rule: offset 0 string = "%PDF" -- failed (comparison)
rule: offset 0 string = "x T psc" -- failed (comparison)
rule: offset 0 string = "begin" -- failed (comparison)
rule: offset 0 string = "xbtoa" -- failed (comparison)
rule: offset 0 string = "P1" -- failed (comparison)
rule: offset 0 string = "P2" -- failed (comparison)
rule: offset 0 string = "P3" -- failed (comparison)
rule: offset 0 string = "P4" -- failed (comparison)
rule: offset 0 string = "P5" -- failed (comparison)
rule: offset 0 string = "P6" -- failed (comparison)
rule: offset 0 string = "WNGZWZSS" -- failed (comparison)
rule: offset 0 string = "#Inventor V" -- failed (comparison)
rule: offset 0 string = "\x89PNG" -- failed (comparison)
rule: offset 0 short = 0xffd8 -- failed (comparison)
rule: offset 0 short = 0xd8ff -- failed (comparison)
rule: offset 0 string = "#FIG" -- failed (comparison)
rule: offset 0 ascii = -- success (result postscript, rule "%F/textfmt -B -f Courier-Bold       -Ml=0.4in -p 11 -s %s >%o <%i")
CONVERT "/usr/local/sbin/textfmt -B -f Courier-Bold     -Ml=0.4in -p 11 -s default >/tmp//sndfax1GVoFm </etc/passwd"
Apply DisplayNumber rules to "111"
--> return result "111"
Apply DisplayNumber rules to "111"
--> return result "111"
-> TYPE I
200 Type set to Image.
SEND compressed data, 7794 bytes
-> PORT 127,0,0,1,128,38
200 PORT command successful.
-> MODE Z
200 Mode set to ZIP.
-> STOT
150 FILE: /tmp/doc1005.ps (Opening new data connection).
SEND 2872 bytes transmitted (2.7x compression)
226 Transfer complete (FILE: /tmp/doc1005.ps).
-> JNEW
200 New job created: jobid: 689 groupid: 689.
-> JPARM FROMUSER "Tony"
213 FROMUSER set to "Tony".
-> JPARM SENDTIME 200512210830
213 SENDTIME set to 20051221083000.
-> JPARM LASTTIME 000300
213 LASTTIME set to 000300.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "111"
213 DIALSTRING set to "111".
-> JPARM NOTIFYADDR "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx"
213 NOTIFYADDR set to "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx".
-> JPARM VRES 98
213 VRES set to 98.
-> JPARM PAGEWIDTH 209
213 PAGEWIDTH set to 209.
-> JPARM PAGELENGTH 296
213 PAGELENGTH set to 296.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc1005.ps
200 Added document /tmp/doc1005.ps as docq/doc1005.ps.689.
-> JSUBM
200 Job 689 submitted.
request id is 689 (group id 689) for host localhost (1 file)
-> JOB DEFAULT
200 Current job: (default).
-> JNEW
200 New job created: jobid: 690 groupid: 690.
-> JPARM FROMUSER "Tony"
213 FROMUSER set to "Tony".
-> JPARM SENDTIME 200512210830
213 SENDTIME set to 20051221083000.
-> JPARM LASTTIME 000300
213 LASTTIME set to 000300.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "111"
213 DIALSTRING set to "111".
-> JPARM NOTIFYADDR "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx"
213 NOTIFYADDR set to "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx".
-> JPARM VRES 98
213 VRES set to 98.
-> JPARM PAGEWIDTH 209
213 PAGEWIDTH set to 209.
-> JPARM PAGELENGTH 296
213 PAGELENGTH set to 296.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc1005.ps
200 Added document /tmp/doc1005.ps as docq/doc1005.ps.690.
-> JSUBM
200 Job 690 submitted.
request id is 690 (group id 690) for host localhost (1 file)
HylaFAX scheduler on melittdelov.gribbles.com.au: Running
Modem ttya1 (+1.999.555.1212): Initializing server

JID   Pri S Number         Pages Dials     Date       Time Status
689   127 P 111             0:0   0:12 2005/12/21 08.30.00
690   127 P 111             0:0   0:12 2005/12/21 08.30.00

####################################################################
These ones don't get sent: (different dates localtime & GMT)
####################################################################
[tdelov@melittdelov ~]$ date ; date -u ; sendfax  -vv -n -a 'now + 1 minute' -d 111 -d 111 /etc/passwd  ; faxstat -s
Wed Dec 21 08:37:42 EST 2005
Tue Dec 20 21:37:42 UTC 2005
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.localdomain.
220 melittdelov.gribbles.com.au server (HylaFAX (tm) Version 4.2.3.1) ready.
-> USER tdelov
230 User tdelov logged in.
match against (..., 512)
rule: offset 0 string = "%!" -- failed (comparison)
rule: offset 0 short = 0x4d4d -- failed (comparison)
rule: offset 0 short = 0x4949 -- failed (comparison)
rule: offset 0 short = 0x1da -- failed (comparison)
rule: offset 0 short = 0x1f1e -- failed (comparison)
rule: offset 0 short = 0x1f9d -- failed (comparison)
rule: offset 0 short = 0x506 -- failed (comparison)
rule: offset 0 short = 0x5343 -- failed (comparison)
rule: offset 0 short = 0xf702 -- failed (comparison)
rule: offset 0 string = "GIF" -- failed (comparison)
rule: offset 0 long = 0x59a66a95 -- failed (comparison)
rule: offset 0 string = "%PDF" -- failed (comparison)
rule: offset 0 string = "x T psc" -- failed (comparison)
rule: offset 0 string = "begin" -- failed (comparison)
rule: offset 0 string = "xbtoa" -- failed (comparison)
rule: offset 0 string = "P1" -- failed (comparison)
rule: offset 0 string = "P2" -- failed (comparison)
rule: offset 0 string = "P3" -- failed (comparison)
rule: offset 0 string = "P4" -- failed (comparison)
rule: offset 0 string = "P5" -- failed (comparison)
rule: offset 0 string = "P6" -- failed (comparison)
rule: offset 0 string = "WNGZWZSS" -- failed (comparison)
rule: offset 0 string = "#Inventor V" -- failed (comparison)
rule: offset 0 string = "\x89PNG" -- failed (comparison)
rule: offset 0 short = 0xffd8 -- failed (comparison)
rule: offset 0 short = 0xd8ff -- failed (comparison)
rule: offset 0 string = "#FIG" -- failed (comparison)
rule: offset 0 ascii = -- success (result postscript, rule "%F/textfmt -B -f Courier-Bold       -Ml=0.4in -p 11 -s %s >%o <%i")
CONVERT "/usr/local/sbin/textfmt -B -f Courier-Bold     -Ml=0.4in -p 11 -s default >/tmp//sndfaxyGoFy8 </etc/passwd"
Apply DisplayNumber rules to "111"
--> return result "111"
Apply DisplayNumber rules to "111"
--> return result "111"
-> TYPE I
200 Type set to Image.
SEND compressed data, 7794 bytes
-> PORT 127,0,0,1,128,99
200 PORT command successful.
-> MODE Z
200 Mode set to ZIP.
-> STOT
150 FILE: /tmp/doc1008.ps (Opening new data connection).
SEND 2873 bytes transmitted (2.7x compression)
226 Transfer complete (FILE: /tmp/doc1008.ps).
-> JNEW
200 New job created: jobid: 695 groupid: 695.
-> JPARM FROMUSER "Tony"
213 FROMUSER set to "Tony".
-> JPARM SENDTIME 200512202138
213 SENDTIME set to 20051221083800.
-> JPARM LASTTIME 000300
213 LASTTIME set to 000300.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "111"
213 DIALSTRING set to "111".
-> JPARM NOTIFYADDR "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx"
213 NOTIFYADDR set to "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx".
-> JPARM VRES 98
213 VRES set to 98.
-> JPARM PAGEWIDTH 209
213 PAGEWIDTH set to 209.
-> JPARM PAGELENGTH 296
213 PAGELENGTH set to 296.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc1008.ps
200 Added document /tmp/doc1008.ps as docq/doc1008.ps.695.
-> JSUBM
200 Job 695 submitted.
request id is 695 (group id 695) for host localhost (1 file)
-> JOB DEFAULT
200 Current job: (default).
-> JNEW
200 New job created: jobid: 696 groupid: 696.
-> JPARM FROMUSER "Tony"
213 FROMUSER set to "Tony".
-> JPARM SENDTIME 200512202138
213 SENDTIME set to 20051221083800.
-> JPARM LASTTIME 000300
213 LASTTIME set to 000300.
-> JPARM MAXDIALS 12
213 MAXDIALS set to 12.
-> JPARM MAXTRIES 3
213 MAXTRIES set to 3.
-> JPARM SCHEDPRI 127
213 SCHEDPRI set to 127.
-> JPARM DIALSTRING "111"
213 DIALSTRING set to "111".
-> JPARM NOTIFYADDR "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx"
213 NOTIFYADDR set to "tdelov@xxxxxxxxxxxxxxxxxxxxxxxxxxx".
-> JPARM VRES 98
213 VRES set to 98.
-> JPARM PAGEWIDTH 209
213 PAGEWIDTH set to 209.
-> JPARM PAGELENGTH 296
213 PAGELENGTH set to 296.
-> JPARM NOTIFY "none"
213 NOTIFY set to "none".
-> JPARM PAGECHOP "default"
213 PAGECHOP set to "default".
-> JPARM CHOPTHRESHOLD 3
213 CHOPTHRESHOLD set to 3.
-> JPARM DOCUMENT /tmp/doc1008.ps
200 Added document /tmp/doc1008.ps as docq/doc1008.ps.696.
-> JSUBM
200 Job 696 submitted.
request id is 696 (group id 696) for host localhost (1 file)

HylaFAX scheduler on melittdelov.gribbles.com.au: Running
Modem ttya1 (+1.999.555.1212): Running and idle

JID   Pri S Number         Pages Dials     Date       Time Status
695   127 P 111             0:0   0:12 2005/12/21 08.38.00
696   127 P 111             0:0   0:12 2005/12/21 08.38.00


[tdelov@melittdelov ~]$ date ; date -u ; faxstat -sl ; faxstat -sg
Wed Dec 21 08:40:03 EST 2005
Tue Dec 20 21:40:03 UTC 2005
HylaFAX scheduler on melittdelov.gribbles.com.au: Running
Modem ttya1 (+1.999.555.1212): Running and idle

JID   Pri S Number         Pages Dials     Date       Time Status
695   127 P 111             0:0   0:12 2005/12/21 19.38.00
696   127 P 111             0:0   0:12 2005/12/21 08.38.00
HylaFAX scheduler on melittdelov.gribbles.com.au: Running
Modem ttya1 (+1.999.555.1212): Running and idle

JID   Pri S Number         Pages Dials     Date       Time Status
695   127 P 111             0:0   0:12 2005/12/21 08.38.00
696   127 P 111             0:0   0:12 2005/12/21 08.38.00

####################################################################









Attention:
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of The Gribbles Group.

Thank You.

Whilst every effort has been made to ensure that this e-mail message and any attachments are free from viruses, you should scan this message and any attachments.
Under no circumstances do we accept liability for any loss or damage which may result from your receipt of this message or any attachment.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*