Re: [hylafax-users] CID & DTMF

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Warren Johnson wrote:

> ModemResetCmds:                   AT+VCID=1
>
> ModemRingsBeforeResponse:  2
>
> ModemRingResponse:  AT+FCLASS=8;H1
>
> CallIDPattern:                "NMBR="
>
> CallIDPattern:                "NAME="
>
> CallIDPattern:                SHIELDED_DTMF
>
> CallIDAnswerLength:      4
>
> ModemAnswerCmd:                  <delay:100>AT+FCLASS=1;A

For testing, stop faxgetty on that modem and run minicom on it instead.  
Then give the following commands:

 ATZ
 ATS0=0
 AT+VCID=1
 AT+FCLASS=8

All of those should result in "OK".  Then, call the modem's number.  
Watch for the CallerID to appear.  Count the number of RINGs.  After the 
CallerID appears send the "ATH1" command and then watch what happens.  
You should see the DTMF appear (mixed with dots, probably).

Anyway, if you could cut-n-paste that minicom session back in a reply 
post it should help us help you.

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*