[hylafax-users] CID & DTMF

["Warren Johnson" <wjohnson@xxxxxxxxxxxxxxxxxx>]

Hi All,

 

I setup HylaFAX 4.2.3.1 on Debian Sarge with four Zoom PCI 2920 Plus modems. Sending and receiving faxes work great, but I’m trying to capture DTMF tones for routing. I have the modem config files setup according to the instructions. In the log files where the CID and DTMF info should be there is blank quotes. I know the CID info is being passed from the switch because I put a phone with a display on the line, called it and saw the CID info. Does anyone know if I can do this with these modems?

 

Here is my modem config file:

 

CountryCode:                1

AreaCode:                    xxx

FAXNumber:                 xxxxxxxxxxx

LongDistancePrefix:      1

InternationalPrefix:         011

DialStringRules:            etc/dialrules

ServerTracing:               0xFFF  

SessionTracing:                        11

RecvFileMode:              0600

LogFileMode:                0600

DeviceMode:                0600

RingsBeforeAnswer:      0         

SpeakerVolume:                        off

GettyArgs:                    "-h %l dx_%s"

LocalIdentifier:              "xxxxxxxxxxxxxxxx"

TagLineFont:                 etc/lutRS18.pcf

TagLineFormat:             "From %%l|%c|Page %%P of %%T"

MaxRecvPages:                        25

#

 

ModemType:                 Class1              # use this to supply a hint

ModemFlowControl:      rtscts                # many firmwares have broken software flow control

Class1TMConnectDelay:            400                   # counteract quick CONNECT response

 

# Or with the MT5634ZBA-DID you'll probably need something like...

# ModemReadyCmds:   AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits

# CallIDPattern: "DTMF"             # format of AT*DF1

# CallIDAnswerLength:   4                      # four DTMF-DID digits then ATA

ModemResetCmds:                   AT+VCID=1

ModemRingsBeforeResponse:  2

ModemRingResponse:  AT+FCLASS=8;H1

CallIDPattern:                "NMBR="

CallIDPattern:                "NAME="

CallIDPattern:                SHIELDED_DTMF

CallIDAnswerLength:      4

ModemAnswerCmd:                  <delay:100>AT+FCLASS=1;A

 

Here is the top of the log file.

 

Dec 15 14:48:47.54: [ 8518]: HylaFAX (tm) Version 4.2.3.1

Dec 15 14:48:47.54: [ 8518]: CallID: "" "" "    "

Dec 15 14:48:47.54: [ 8518]: DELAY 1000 ms

Dec 15 14:48:48.54: [ 8518]: <-- [14:AT+FCLASS=1;A\r]

Dec 15 14:48:54.57: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.57: [ 8518]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS4'

Dec 15 14:48:54.57: [ 8518]: RECV FAX: begin

Dec 15 14:48:54.57: [ 8518]: <-- data [34]

Dec 15 14:48:54.57: [ 8518]: <-- data [2]

Dec 15 14:48:54.58: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.58: [ 8518]: <-- data [23]

Dec 15 14:48:54.58: [ 8518]: <-- data [2]

Dec 15 14:48:54.59: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:54.59: [ 8518]: <-- data [13]

Dec 15 14:48:54.59: [ 8518]: <-- data [2]

Dec 15 14:48:56.86: [ 8518]: --> [2:OK]

Dec 15 14:48:56.86: [ 8518]: <-- [9:AT+FRH=3\r]

Dec 15 14:48:57.00: [ 8518]: --> [7:CONNECT]

Dec 15 14:48:58.40: [ 8518]: --> [2:OK]

 

Thanks in advance

 

Warren Johnson

Network Systems Administrator

Jackson General Hospital