[hylafax-users] caller ID issue

["Ivan Petrov" <ivanp@xxxxxxxxxxxxx>]

Hi,

 

I am using hylafax 4.2.3 on RHEL 3 (updater 6) with a US Robotics Sportster 56K modem. My line has caller ID option. I am having problems receiving faxes if I enable caller ID in modem config file. Here is what I add to the modem config file (I also switched to answer on 2 ring so I can get the caller ID info):

 

ModemResetCmds:         AT#CID=1

 

When enabled - here is what happens: in hylafax log file I get:

 

Dec 15 13:25:50.50: [ 4553]: SESSION BEGIN 000000053 14166075301
Dec 15 13:25:50.50: [ 4553]: HylaFAX (tm) Version 4.2.3
Dec 15 13:25:50.50: [ 4553]: CallID: "4165555555" "COMPANYNAME"
Dec 15 13:25:50.50: [ 4553]: <-- [4:ATA\r]
Dec 15 13:26:38.57: [ 4553]: --> [4:+FCO]
Dec 15 13:26:38.57: [ 4553]: ANSWER: FAX CONNECTION  DEVICE '/dev/modem'
Dec 15 13:26:38.57: [ 4553]: RECV FAX: begin
Dec 15 13:26:41.00: [ 4553]: --> [7:+FHS:74]
Dec 15 13:26:41.00: [ 4553]: REMOTE HANGUP: T.30 T1 timeout after EOM received (code 74)
Dec 15 13:26:41.01: [ 4553]: --> [2:OK]
Dec 15 13:26:41.01: [ 4553]: RECV FAX: T.30 T1 timeout after EOM received
Dec 15 13:26:41.01: [ 4553]: RECV FAX: end
Dec 15 13:26:41.01: [ 4553]: SESSION END

 

What happens is sending party closes the call. I tried with couple of different fax machines - result always the same.

 

If I only change

 

ModemResetCmds:         AT#CID=0

 

(disable callerID) I can receive fax without problems.

 

Anyone have an idea what could be wrong?

Thank you!

 

Ivan