 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Failure to train remote modem at 2400 bps
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Failure to train remote modem at 2400 bps
- From: Santiago MartÃn <smartin@xxxxxx>
- Date: Thu, 15 Dec 2005 02:10:41 +0100
Hello, I have a problem send a fax with error: Failure to train remote modem at 2400 bps I have a USRobotics Extenal modem an the Hylafax hylafax-4.2.1-1rh8 version What is the problem? The log is this: dic 15 01:27:05.62: [ 4120]: SESSION BEGIN 000000009 00XXXXXXX dic 15 01:27:05.62: [ 4120]: HylaFAX (tm) Version 4.2.1 dic 15 01:27:05.62: [ 4120]: SEND FAX: JOB 3 DEST XXXXXXX COMMID 000000009 DEVICE '/dev/ttyS0' dic 15 01:27:05.62: [ 4120]: <-- [12:AT+FCLASS=1\r] dic 15 01:27:05.86: [ 4120]: --> [2:OK] dic 15 01:27:05.86: [ 4120]: DIAL XXXXXXX dic 15 01:27:05.86: [ 4120]: <-- [14:ATDT976203064\r] dic 15 01:27:18.18: [ 4120]: --> [7:CONNECT] dic 15 01:27:20.20: [ 4120]: --> [2:OK] dic 15 01:27:20.20: [ 4120]: REMOTE NSF "00 00 0E 00 00 00 96 FF 41 07 00 10 00 02 95 80 18 01 49 02 45 4F 4E 20 49 4E 46 4F 52 4D 41 54 49 43 41 20 03" dic 15 01:27:20.20: [ 4120]: NSF remote fax equipment: Panasonic dic 15 01:27:20.20: [ 4120]: NSF remote station ID: "Enterprise name " dic 15 01:27:20.20: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:20.22: [ 4120]: --> [7:CONNECT] dic 15 01:27:20.94: [ 4120]: --> [2:OK] dic 15 01:27:20.94: [ 4120]: REMOTE CSI "XXXXXXX" dic 15 01:27:20.94: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:20.96: [ 4120]: --> [7:CONNECT] dic 15 01:27:21.32: [ 4120]: --> [2:OK] dic 15 01:27:21.32: [ 4120]: REMOTE best rate 14400 bit/s dic 15 01:27:21.32: [ 4120]: REMOTE max A4 page width (215 mm) dic 15 01:27:21.32: [ 4120]: REMOTE max unlimited page length dic 15 01:27:21.32: [ 4120]: REMOTE best vres 15.4 line/mm dic 15 01:27:21.32: [ 4120]: REMOTE best format 2-D MMR dic 15 01:27:21.32: [ 4120]: REMOTE supports T.30 Annex A, 256-byte ECM dic 15 01:27:21.32: [ 4120]: REMOTE best 0 ms/scanline dic 15 01:27:21.32: [ 4120]: USE 14400 bit/s dic 15 01:27:21.32: [ 4120]: USE error correction mode dic 15 01:27:21.32: [ 4120]: USE 0 ms/scanline dic 15 01:27:21.32: [ 4120]: SEND file "docq/doc3.ps;01" dic 15 01:27:21.32: [ 4120]: USE A4 page width (215 mm) dic 15 01:27:21.32: [ 4120]: USE unlimited page length dic 15 01:27:21.32: [ 4120]: USE 7.7 line/mm dic 15 01:27:21.32: [ 4120]: USE 2-D MMR dic 15 01:27:21.32: [ 4120]: SEND training at v.17 14400 bit/s dic 15 01:27:21.32: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:21.52: [ 4120]: --> [7:CONNECT] dic 15 01:27:21.52: [ 4120]: <-- data [23] dic 15 01:27:21.52: [ 4120]: <-- data [2] dic 15 01:27:21.55: [ 4120]: --> [7:CONNECT] dic 15 01:27:21.55: [ 4120]: <-- data [7] dic 15 01:27:21.55: [ 4120]: <-- data [2] dic 15 01:27:23.52: [ 4120]: --> [2:OK] dic 15 01:27:23.52: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:23.60: [ 4120]: --> [2:OK] dic 15 01:27:23.60: [ 4120]: <-- [11:AT+FTM=145\r] dic 15 01:27:25.08: [ 4120]: --> [7:CONNECT] dic 15 01:27:25.08: [ 4120]: <-- data [1024] dic 15 01:27:25.08: [ 4120]: <-- data [1024] dic 15 01:27:25.08: [ 4120]: <-- data [652] dic 15 01:27:25.08: [ 4120]: <-- data [2] dic 15 01:27:26.61: [ 4120]: --> [2:OK] dic 15 01:27:26.61: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:27:26.64: [ 4120]: --> [2:OK] dic 15 01:27:26.64: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:27.68: [ 4120]: --> [7:CONNECT] dic 15 01:27:28.79: [ 4120]: --> [2:OK] dic 15 01:27:28.79: [ 4120]: SEND training at v.17 12000 bit/s dic 15 01:27:28.79: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:28.99: [ 4120]: --> [7:CONNECT] dic 15 01:27:28.99: [ 4120]: <-- data [23] dic 15 01:27:28.99: [ 4120]: <-- data [2] dic 15 01:27:29.02: [ 4120]: --> [7:CONNECT] dic 15 01:27:29.02: [ 4120]: <-- data [7] dic 15 01:27:29.02: [ 4120]: <-- data [2] dic 15 01:27:30.99: [ 4120]: --> [2:OK] dic 15 01:27:30.99: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:31.08: [ 4120]: --> [2:OK] dic 15 01:27:31.08: [ 4120]: <-- [11:AT+FTM=121\r] dic 15 01:27:32.56: [ 4120]: --> [7:CONNECT] dic 15 01:27:32.56: [ 4120]: <-- data [1024] dic 15 01:27:32.56: [ 4120]: <-- data [1024] dic 15 01:27:32.56: [ 4120]: <-- data [202] dic 15 01:27:32.56: [ 4120]: <-- data [2] dic 15 01:27:34.09: [ 4120]: --> [2:OK] dic 15 01:27:34.09: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:27:34.12: [ 4120]: --> [2:OK] dic 15 01:27:34.12: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:35.32: [ 4120]: --> [7:CONNECT] dic 15 01:27:36.25: [ 4120]: --> [2:OK] dic 15 01:27:36.25: [ 4120]: SEND training at v.17 9600 bit/s dic 15 01:27:36.25: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:36.45: [ 4120]: --> [7:CONNECT] dic 15 01:27:36.45: [ 4120]: <-- data [23] dic 15 01:27:36.45: [ 4120]: <-- data [2] dic 15 01:27:36.48: [ 4120]: --> [7:CONNECT] dic 15 01:27:36.48: [ 4120]: <-- data [7] dic 15 01:27:36.48: [ 4120]: <-- data [2] dic 15 01:27:38.45: [ 4120]: --> [2:OK] dic 15 01:27:38.45: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:38.53: [ 4120]: --> [2:OK] dic 15 01:27:38.53: [ 4120]: <-- [10:AT+FTM=97\r] dic 15 01:27:40.01: [ 4120]: --> [7:CONNECT] dic 15 01:27:40.01: [ 4120]: <-- data [1024] dic 15 01:27:40.01: [ 4120]: <-- data [776] dic 15 01:27:40.01: [ 4120]: <-- data [2] dic 15 01:27:41.55: [ 4120]: --> [2:OK] dic 15 01:27:41.55: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:27:41.58: [ 4120]: --> [2:OK] dic 15 01:27:41.58: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:42.88: [ 4120]: --> [7:CONNECT] dic 15 01:27:43.73: [ 4120]: --> [2:OK] dic 15 01:27:43.73: [ 4120]: SEND training at v.29 9600 bit/s dic 15 01:27:43.73: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:43.93: [ 4120]: --> [7:CONNECT] dic 15 01:27:43.93: [ 4120]: <-- data [23] dic 15 01:27:43.93: [ 4120]: <-- data [2] dic 15 01:27:43.96: [ 4120]: --> [7:CONNECT] dic 15 01:27:43.96: [ 4120]: <-- data [7] dic 15 01:27:43.96: [ 4120]: <-- data [2] dic 15 01:27:45.93: [ 4120]: --> [2:OK] dic 15 01:27:45.93: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:46.02: [ 4120]: --> [2:OK] dic 15 01:27:46.02: [ 4120]: <-- [10:AT+FTM=96\r] dic 15 01:27:46.34: [ 4120]: --> [7:CONNECT] dic 15 01:27:46.34: [ 4120]: <-- data [1024] dic 15 01:27:46.34: [ 4120]: <-- data [776] dic 15 01:27:46.34: [ 4120]: <-- data [2] dic 15 01:27:47.88: [ 4120]: --> [2:OK] dic 15 01:27:47.88: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:27:47.91: [ 4120]: --> [2:OK] dic 15 01:27:47.91: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:48.92: [ 4120]: --> [7:CONNECT] dic 15 01:27:49.68: [ 4120]: --> [2:OK] dic 15 01:27:49.68: [ 4120]: SEND training at v.29 7200 bit/s dic 15 01:27:49.68: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:49.88: [ 4120]: --> [7:CONNECT] dic 15 01:27:49.88: [ 4120]: <-- data [23] dic 15 01:27:49.88: [ 4120]: <-- data [2] dic 15 01:27:49.91: [ 4120]: --> [7:CONNECT] dic 15 01:27:49.91: [ 4120]: <-- data [7] dic 15 01:27:49.91: [ 4120]: <-- data [2] dic 15 01:27:51.88: [ 4120]: --> [2:OK] dic 15 01:27:51.88: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:51.96: [ 4120]: --> [2:OK] dic 15 01:27:51.96: [ 4120]: <-- [10:AT+FTM=72\r] dic 15 01:27:52.28: [ 4120]: --> [7:CONNECT] dic 15 01:27:52.28: [ 4120]: <-- data [1024] dic 15 01:27:52.28: [ 4120]: <-- data [326] dic 15 01:27:52.28: [ 4120]: <-- data [2] dic 15 01:27:53.82: [ 4120]: --> [2:OK] dic 15 01:27:53.82: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:27:53.85: [ 4120]: --> [2:OK] dic 15 01:27:53.85: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:27:54.52: [ 4120]: --> [7:CONNECT] dic 15 01:27:55.51: [ 4120]: --> [2:OK] dic 15 01:27:55.51: [ 4120]: SEND training at v.27ter 4800 bit/s dic 15 01:27:55.51: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:27:55.71: [ 4120]: --> [7:CONNECT] dic 15 01:27:55.71: [ 4120]: <-- data [23] dic 15 01:27:55.71: [ 4120]: <-- data [2] dic 15 01:27:55.74: [ 4120]: --> [7:CONNECT] dic 15 01:27:55.74: [ 4120]: <-- data [7] dic 15 01:27:55.74: [ 4120]: <-- data [2] dic 15 01:27:57.71: [ 4120]: --> [2:OK] dic 15 01:27:57.71: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:27:57.80: [ 4120]: --> [2:OK] dic 15 01:27:57.80: [ 4120]: <-- [10:AT+FTM=48\r] dic 15 01:27:58.82: [ 4120]: --> [7:CONNECT] dic 15 01:27:58.82: [ 4120]: <-- data [900] dic 15 01:27:58.82: [ 4120]: <-- data [2] dic 15 01:28:00.36: [ 4120]: --> [2:OK] dic 15 01:28:00.36: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:28:00.39: [ 4120]: --> [2:OK] dic 15 01:28:00.39: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:28:00.92: [ 4120]: --> [7:CONNECT] dic 15 01:28:01.95: [ 4120]: --> [2:OK] dic 15 01:28:01.95: [ 4120]: SEND training at v.27ter fallback mode 2400 bit/s dic 15 01:28:01.95: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:28:02.15: [ 4120]: --> [7:CONNECT] dic 15 01:28:02.15: [ 4120]: <-- data [23] dic 15 01:28:02.15: [ 4120]: <-- data [2] dic 15 01:28:02.18: [ 4120]: --> [7:CONNECT] dic 15 01:28:02.18: [ 4120]: <-- data [7] dic 15 01:28:02.18: [ 4120]: <-- data [2] dic 15 01:28:04.15: [ 4120]: --> [2:OK] dic 15 01:28:04.15: [ 4120]: <-- [9:AT+FTS=7\r] dic 15 01:28:04.23: [ 4120]: --> [2:OK] dic 15 01:28:04.23: [ 4120]: <-- [10:AT+FTM=24\r] dic 15 01:28:05.48: [ 4120]: --> [7:CONNECT] dic 15 01:28:05.48: [ 4120]: <-- data [450] dic 15 01:28:05.48: [ 4120]: <-- data [2] dic 15 01:28:07.06: [ 4120]: --> [2:OK] dic 15 01:28:07.06: [ 4120]: <-- [9:AT+FRS=1\r] dic 15 01:28:07.09: [ 4120]: --> [2:OK] dic 15 01:28:07.09: [ 4120]: <-- [9:AT+FRH=3\r] dic 15 01:28:08.12: [ 4120]: --> [7:CONNECT] dic 15 01:28:08.90: [ 4120]: --> [2:OK] dic 15 01:28:08.90: [ 4120]: TRAINING failed dic 15 01:28:08.90: [ 4120]: SEND: Failure to train remote modem at 2400 bps or minimum speed; Giving up after 3 attempts to send same page "docq/doc3.ps;01", dirnum 0 dic 15 01:28:08.90: [ 4120]: <-- [9:AT+FTH=3\r] dic 15 01:28:09.10: [ 4120]: --> [7:CONNECT] dic 15 01:28:09.10: [ 4120]: <-- data [3] dic 15 01:28:09.10: [ 4120]: <-- data [2] dic 15 01:28:10.28: [ 4120]: --> [2:OK] dic 15 01:28:10.28: [ 4120]: <-- [5:ATH0\r] dic 15 01:28:10.52: [ 4120]: --> [2:OK] dic 15 01:28:10.52: [ 4120]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Failure to train remote modem at 2400 bps
- From: Lee Howard
- Re: [hylafax-users] Failure to train remote modem at 2400 bps
- Prev by Date: [hylafax-users] How to convert incoming image tiff into pdf
- Next by Date: [hylafax-users] caller ID issue
- Previous by thread: Re: [hylafax-users] How to convert incoming image tiff into pdf
- Next by thread: Re: [hylafax-users] Failure to train remote modem at 2400 bps
- Index(es):
Project hosted by iFAX Solutions