HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] erroneous failure message



Lee Howard typed (on Tue, Dec 13, 2005 at 11:21:37AM -0800):
| Jean-Pierre Radley wrote:
| 
| >Lee Howard typed (on Mon, Dec 12, 2005 at 09:20:57PM -0800):
| >| Jean-Pierre Radley wrote:
| >| 
| >| >   -e COMREC invalid response received to PPS.;
| >| >
| >| 
| >| What was the response that it gave?  Can you show the log?
| >
| > 
| >
| 
| >Dec 12 15:09:36.92: [12971]: USE JBIG
| > 
| >
| 
| >Dec 12 15:09:44.09: [12971]: Reading MMR-compressed image file
| > 
| >
| 
| >Dec 12 15:09:49.79: [12971]: SEND send PPS (partial page signal)
| >Dec 12 15:09:49.79: [12971]: SEND send EOP (no more pages or documents)
| >Dec 12 15:09:49.79: [12971]: <-- [9:AT+FRH=3\r]
| >Dec 12 15:09:50.26: [12971]: --> [7:CONNECT]
| >Dec 12 15:09:51.18: [12971]: --> [2:OK]
| >Dec 12 15:09:51.18: [12971]: SEND recv DCN (disconnect)
| >
| 
| This probably means that the Canon receiver is taking issue with some 
| portion of the Phase C image data - like formatting.
| 
| I see that you're using JBIG.  :-)  Are you successfully faxing JBIG 
| elsewhere?

I didn't know I was; I don't see it in any other log files.

| Does it work if you disable ModemSoftRTFCC (like, in DestControls, or 
| even in the modem config) to use MMR, MR, or MH?

I really can't impose on the owner of that Canon fax to do this testing;
but do you suggest I put in that modemSoftRTFCC parameter anyhow, as a
conservative measure?


-- 
JP
	==> http://www.frappr.com/cusm <==

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions