Re: [hylafax-users] erroneous failure message

[Jean-Pierre Radley <jpr@xxxxxxx>]

Lee Howard typed (on Mon, Dec 12, 2005 at 09:20:57PM -0800):
| Jean-Pierre Radley wrote:
| 
| >   -e COMREC invalid response received to PPS.;
| >
| 
| What was the response that it gave?  Can you show the log?

Dec 12 15:09:08.26: [12971]: SESSION BEGIN 000002588 1212760XXXX
Dec 12 15:09:08.26: [12971]: HylaFAX (tm) Version 4.2.3
Dec 12 15:09:08.26: [12971]: SEND FAX: JOB 1102 DEST 1212760XXXX COMMID 000002588 DEVICE '/dev/tty1A' FROM 'Jean-Pierre A. Radley <appl@jpradley>' USER appl
Dec 12 15:09:08.26: [12971]: <-- [12:AT+FCLASS=1\r]
Dec 12 15:09:08.28: [12971]: --> [2:OK]
Dec 12 15:09:08.28: [12971]: DIAL 1212760XXXX
Dec 12 15:09:08.28: [12971]: <-- [16:ATDT1212760XXXX\r]
Dec 12 15:09:33.98: [12971]: --> [7:CONNECT]
Dec 12 15:09:35.77: [12971]: --> [2:OK]
Dec 12 15:09:35.77: [12971]: REMOTE NSF "00 00 11 80 00 8A 49 10 50 45 4E 53 49 4F 4E 20 20 20 20 20 20 20 20 20 00 6A 00 80 80 80 04 01 02"
Dec 12 15:09:35.77: [12971]: NSF remote fax equipment: Canon Laser Class 9000 Series
Dec 12 15:09:35.77: [12971]: NSF remote station ID: "COMPANY         "
Dec 12 15:09:35.77: [12971]: <-- [9:AT+FRH=3\r]
Dec 12 15:09:35.80: [12971]: --> [7:CONNECT]
Dec 12 15:09:36.50: [12971]: --> [2:OK]
Dec 12 15:09:36.50: [12971]: REMOTE CSI "212 760 XXXX"
Dec 12 15:09:36.50: [12971]: <-- [9:AT+FRH=3\r]
Dec 12 15:09:36.52: [12971]: --> [7:CONNECT]
Dec 12 15:09:36.92: [12971]: --> [2:OK]
Dec 12 15:09:36.92: [12971]: REMOTE best rate 33600 bit/s
Dec 12 15:09:36.92: [12971]: REMOTE max A4 page width (215 mm)
Dec 12 15:09:36.92: [12971]: REMOTE max unlimited page length
Dec 12 15:09:36.92: [12971]: REMOTE best vres R16 x 15.4 line/mm
Dec 12 15:09:36.92: [12971]: REMOTE format support: MH, MR, MMR, JBIG
Dec 12 15:09:36.92: [12971]: REMOTE supports T.30 Annex A, 256-byte ECM
Dec 12 15:09:36.92: [12971]: REMOTE best 10 ms/scanline
Dec 12 15:09:36.92: [12971]: USE 14400 bit/s
Dec 12 15:09:36.92: [12971]: USE error correction mode
Dec 12 15:09:36.92: [12971]: SEND file "docq/doc1389.tif;f1"
Dec 12 15:09:36.92: [12971]: USE A4 page width (215 mm)
Dec 12 15:09:36.92: [12971]: USE unlimited page length
Dec 12 15:09:36.92: [12971]: USE 7.7 line/mm
Dec 12 15:09:36.92: [12971]: USE JBIG
Dec 12 15:09:36.92: [12971]: USE 0 ms/scanline
Dec 12 15:09:36.92: [12971]: SEND training at v.17 14400 bit/s
Dec 12 15:09:36.92: [12971]: <-- [9:AT+FRS=7\r]
Dec 12 15:09:37.03: [12971]: --> [2:OK]
Dec 12 15:09:37.03: [12971]: <-- [9:AT+FTH=3\r]
Dec 12 15:09:37.08: [12971]: --> [7:CONNECT]
Dec 12 15:09:37.08: [12971]: <-- data [23]
Dec 12 15:09:37.08: [12971]: <-- data [2]
Dec 12 15:09:38.86: [12971]: --> [7:CONNECT]
Dec 12 15:09:38.86: [12971]: <-- data [13]
Dec 12 15:09:38.86: [12971]: <-- data [2]
Dec 12 15:09:39.46: [12971]: --> [2:OK]
Dec 12 15:09:39.46: [12971]: <-- [9:AT+FTS=7\r]
Dec 12 15:09:39.56: [12971]: --> [2:OK]
Dec 12 15:09:39.56: [12971]: <-- [11:AT+FTM=145\r]
Dec 12 15:09:39.60: [12971]: --> [7:CONNECT]
Dec 12 15:09:39.60: [12971]: <-- data [1024]
Dec 12 15:09:39.60: [12971]: <-- data [1024]
Dec 12 15:09:39.60: [12971]: <-- data [652]
Dec 12 15:09:39.98: [12971]: <-- data [2]
Dec 12 15:09:42.72: [12971]: --> [2:OK]
Dec 12 15:09:42.72: [12971]: <-- [9:AT+FRH=3\r]
Dec 12 15:09:43.16: [12971]: --> [7:CONNECT]
Dec 12 15:09:44.08: [12971]: --> [2:OK]
Dec 12 15:09:44.08: [12971]: TRAINING succeeded
Dec 12 15:09:44.08: [12971]: SEND begin page
Dec 12 15:09:44.09: [12971]: Reading MMR-compressed image file
Dec 12 15:09:44.28: [12971]: SEND send frame number 0
Dec 12 15:09:44.28: [12971]: SEND send frame number 1
Dec 12 15:09:44.28: [12971]: SEND send frame number 2
Dec 12 15:09:44.28: [12971]: SEND send frame number 3
Dec 12 15:09:44.28: [12971]: SEND send frame number 4
Dec 12 15:09:44.28: [12971]: SEND send frame number 5
Dec 12 15:09:44.28: [12971]: SEND send frame number 6
Dec 12 15:09:44.28: [12971]: SEND send frame number 7
Dec 12 15:09:44.28: [12971]: SEND send frame number 8
Dec 12 15:09:44.28: [12971]: SEND send frame number 9
Dec 12 15:09:44.28: [12971]: SEND send frame number 10
Dec 12 15:09:44.28: [12971]: SEND send frame number 11
Dec 12 15:09:44.28: [12971]: SEND send frame number 12
Dec 12 15:09:44.28: [12971]: SEND send frame number 13
Dec 12 15:09:44.28: [12971]: SEND send frame number 14
Dec 12 15:09:44.28: [12971]: SEND send frame number 15
Dec 12 15:09:44.28: [12971]: SEND send frame number 16
Dec 12 15:09:44.28: [12971]: SEND send frame number 17
Dec 12 15:09:44.28: [12971]: SEND send frame number 18
Dec 12 15:09:44.28: [12971]: SEND send frame number 19
Dec 12 15:09:44.28: [12971]: SEND send frame number 20
Dec 12 15:09:44.28: [12971]: DELAY 200 ms
Dec 12 15:09:44.47: [12971]: <-- [11:AT+FTM=146\r]
Dec 12 15:09:44.52: [12971]: --> [7:CONNECT]
Dec 12 15:09:44.52: [12971]: <-- data [1027]
Dec 12 15:09:44.52: [12971]: <-- data [1033]
Dec 12 15:09:44.52: [12971]: <-- data [1031]
Dec 12 15:09:44.90: [12971]: <-- data [1029]
Dec 12 15:09:45.38: [12971]: <-- data [1032]
Dec 12 15:09:45.98: [12971]: <-- data [881]
Dec 12 15:09:46.48: [12971]: <-- data [2]
Dec 12 15:09:48.22: [12971]: --> [2:OK]
Dec 12 15:09:48.22: [12971]: <-- [9:AT+FTS=9\r]
Dec 12 15:09:48.34: [12971]: --> [2:OK]
Dec 12 15:09:48.34: [12971]: <-- [9:AT+FTH=3\r]
Dec 12 15:09:48.38: [12971]: --> [7:CONNECT]
Dec 12 15:09:48.38: [12971]: <-- data [7]
Dec 12 15:09:48.38: [12971]: <-- data [2]
Dec 12 15:09:49.79: [12971]: --> [2:OK]
Dec 12 15:09:49.79: [12971]: SEND send PPS (partial page signal)
Dec 12 15:09:49.79: [12971]: SEND send EOP (no more pages or documents)
Dec 12 15:09:49.79: [12971]: <-- [9:AT+FRH=3\r]
Dec 12 15:09:50.26: [12971]: --> [7:CONNECT]
Dec 12 15:09:51.18: [12971]: --> [2:OK]
Dec 12 15:09:51.18: [12971]: SEND recv DCN (disconnect)
Dec 12 15:09:51.18: [12971]: <-- [9:AT+FRS=7\r]
Dec 12 15:09:51.30: [12971]: --> [2:OK]
Dec 12 15:09:51.30: [12971]: COMREC invalid response received to PPS.
Dec 12 15:09:51.30: [12971]: SEND end page
Dec 12 15:09:51.30: [12971]: SEND: COMREC invalid response received to PPS.; Giving up after 3 attempts to send same page "docq/doc1389.tif;f1", dirnum 0
Dec 12 15:09:51.30: [12971]: <-- [9:AT+FTH=3\r]
Dec 12 15:09:51.34: [12971]: --> [7:CONNECT]
Dec 12 15:09:51.34: [12971]: <-- data [3]
Dec 12 15:09:51.34: [12971]: <-- data [2]
Dec 12 15:09:52.63: [12971]: --> [2:OK]
Dec 12 15:09:52.64: [12971]: <-- [5:ATH0\r]
Dec 12 15:09:53.55: [12971]: --> [2:OK]
Dec 12 15:09:53.56: [12971]: SESSION END

-- 
JP
	==> http://www.frappr.com/cusm <==

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*