[hylafax-users] COMREC invalid response received to PPS

["Mauro Crisanti" <m.crisanti@xxxxxxxx>]

Hi,
I'm trying to use a Zyxel Omni 56K  with Hylafax 4.2.1 I cannot make this
machine working.

Using it in class 2.0 the machine receive only black pages. Solving this, if
possible, should be the best.....

But I tryed also to set it up in class 1, giving it all the default values
that faxaddmodem ask to me.
When I try to receive a fax, the machine give the "COMREC invalid response
received to PPS" error
Same error that give the sending machine ( that is workins fine since months
). 

Just for fun: sending a fax to the Zyxel box from different brand of
fax(paper) machine gives error (SAMSUNG) 
or success (Brother) (??)

here follows, the trascription of the logs ( sending  and receiving ) for
the same fax. 

Thanks 
Mauro

=================   Session sending
......
Dec 12 12:04:24.13: [16630]: USE A4 page width (215 mm) 
Dec 12 12:04:24.13: [16630]: USE unlimited page length 
Dec 12 12:04:24.13: [16630]: USE 7.7 line/mm 
Dec 12 12:04:24.13: [16630]: USE 2-D MMR 
Dec 12 12:04:24.13: [16630]: SEND training at v.17 14400 bit/s 
Dec 12 12:04:24.13: [16630]: <-- [9:AT+FTH=3\r] 
Dec 12 12:04:24.32: [16630]: --> [7:CONNECT] 
Dec 12 12:04:24.35: [16630]: --> [7:CONNECT] 
Dec 12 12:04:26.33: [16630]: --> [2:OK] 
Dec 12 12:04:26.33: [16630]: <-- [9:AT+FTS=7\r] 
Dec 12 12:04:26.41: [16630]: --> [2:OK] 
Dec 12 12:04:26.42: [16630]: <-- [11:AT+FTM=145\r] 
Dec 12 12:04:27.90: [16630]: --> [7:CONNECT] 
Dec 12 12:04:29.61: [16630]: --> [2:OK] 
Dec 12 12:04:29.61: [16630]: <-- [9:AT+FRS=1\r] 
Dec 12 12:04:29.64: [16630]: --> [2:OK] 
Dec 12 12:04:29.64: [16630]: <-- [9:AT+FRH=3\r] 
Dec 12 12:04:30.14: [16630]: --> [7:CONNECT] 
Dec 12 12:04:31.10: [16630]: --> [2:OK] 
Dec 12 12:04:31.10: [16630]: TRAINING succeeded 
Dec 12 12:04:31.10: [16630]: SEND begin page 
Dec 12 12:04:31.10: [16630]: Reading MR-compressed image file 
Dec 12 12:04:31.10: [16630]: SEND EOFB 
Dec 12 12:04:31.10: [16630]: SEND send frame number 0 
Dec 12 12:04:31.11: [16630]: SEND send frame number 1 
Dec 12 12:04:31.11: [16630]: SEND send frame number 2 
Dec 12 12:04:31.11: [16630]: SEND send frame number 3 
Dec 12 12:04:31.11: [16630]: SEND send frame number 4 
Dec 12 12:04:31.11: [16630]: SEND send frame number 5 
Dec 12 12:04:31.11: [16630]: SEND send frame number 6 
Dec 12 12:04:31.11: [16630]: SEND send frame number 7 
Dec 12 12:04:31.11: [16630]: SEND send frame number 8 
Dec 12 12:04:31.11: [16630]: SEND send frame number 9 
Dec 12 12:04:31.11: [16630]: DELAY 200 ms 
Dec 12 12:04:31.31: [16630]: <-- [11:AT+FTM=146\r] 
Dec 12 12:04:31.57: [16630]: --> [7:CONNECT] 
Dec 12 12:04:33.32: [16630]: --> [2:OK] 
Dec 12 12:04:33.32: [16630]: <-- [9:AT+FTS=9\r] 
Dec 12 12:04:33.42: [16630]: --> [2:OK] 
Dec 12 12:04:33.42: [16630]: <-- [9:AT+FTH=3\r] 
Dec 12 12:04:33.58: [16630]: --> [7:CONNECT] 
Dec 12 12:04:34.86: [16630]: --> [2:OK] 
Dec 12 12:04:34.86: [16630]: SEND send PPS (partial page signal) 
Dec 12 12:04:34.86: [16630]: SEND send EOP (no more pages or documents) 
Dec 12 12:04:34.86: [16630]: <-- [9:AT+FRH=3\r] 
Dec 12 12:04:35.30: [16630]: --> [7:CONNECT] 
Dec 12 12:04:36.33: [16630]: --> [2:OK] 
Dec 12 12:04:36.33: [16630]: SEND recv DCN (disconnect) 
Dec 12 12:04:36.33: [16630]: <-- [9:AT+FRS=7\r] 
Dec 12 12:04:36.43: [16630]: --> [2:OK] 
Dec 12 12:04:36.43: [16630]: COMREC invalid response received to PPS.
Dec 12 12:04:36.43: [16630]: SEND end page 
Dec 12 12:04:36.43: [16630]: SEND: COMREC invalid response received to PPS.;
Giving up after 3 attempts to send same page "docq/doc10142.ps;71", dirnum 0

Dec 12 12:04:36.43: [16630]: <-- [9:AT+FTH=3\r] 
Dec 12 12:04:36.63: [16630]: --> [7:CONNECT] 
Dec 12 12:04:37.80: [16630]: --> [2:OK] 
Dec 12 12:04:37.80: [16630]: <-- [5:ATH0\r] 
Dec 12 12:04:38.04: [16630]: --> [2:OK] 
Dec 12 12:04:38.05: [16630]: SESSION END





============================   SESSION RECEIVING 

An attempt to receive facsimile on ttyC7 failed because:

    COMREC invalid response received

    ---- Transcript of session follows ----

Dec 12 12:04:14.65: [15945]: SESSION BEGIN 000071631 390743200400 
Dec 12 12:04:14.65: [15945]: HylaFAX (tm) Version 4.2.1 
Dec 12 12:04:14.65: [15945]: <-- [4:ATA\r] 
Dec 12 12:04:21.43: [15945]: --> [7:CONNECT] 
Dec 12 12:04:21.43: [15945]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyC7'
Dec 12 12:04:21.43: [15945]: RECV FAX: begin 
Dec 12 12:04:22.69: [15945]: --> [7:CONNECT] 
Dec 12 12:04:23.71: [15945]: --> [7:CONNECT] 
Dec 12 12:04:24.13: [15945]: --> [2:OK] 
Dec 12 12:04:24.13: [15945]: <-- [9:AT+FRH=3\r] 
Dec 12 12:04:24.55: [15945]: --> [7:CONNECT] 
Dec 12 12:04:26.05: [15945]: --> [2:OK] Dec 12 12:04:26.05: [15945]: REMOTE
TSI "--------"
Dec 12 12:04:26.05: [15945]: <-- [9:AT+FRH=3\r] 
Dec 12 12:04:26.09: [15945]: --> [7:CONNECT] 
Dec 12 12:04:26.35: [15945]: --> [2:OK] 
Dec 12 12:04:26.35: [15945]: REMOTE wants 14400 bit/s 
Dec 12 12:04:26.35: [15945]: REMOTE wants A4 page width (215 mm) 
Dec 12 12:04:26.35: [15945]: REMOTE wants unlimited page length 
Dec 12 12:04:26.35: [15945]: REMOTE wants 7.7 line/mm 
Dec 12 12:04:26.35: [15945]: REMOTE wants 1-D MH 
Dec 12 12:04:26.35: [15945]: RECV training at v.17 14400 bit/s 
Dec 12 12:04:26.35: [15945]: <-- [11:AT+FRM=145\r] 
Dec 12 12:04:27.94: [15945]: --> [7:CONNECT] 
Dec 12 12:04:29.65: [15945]: RECV: TCF 3111 bytes, 1% non-zero, 3019
zero-run 
Dec 12 12:04:29.65: [15945]: --> [10:NO CARRIER] 
Dec 12 12:04:29.65: [15945]: DELAY 75 ms 
Dec 12 12:04:29.73: [15945]: TRAINING succeeded 
Dec 12 12:04:29.73: [15945]: <-- [9:AT+FTH=3\r] 
Dec 12 12:04:30.87: [15945]: --> [7:CONNECT] 
Dec 12 12:04:31.11: [15945]: --> [2:OK] 
Dec 12 12:04:31.11: [15945]: <-- [11:AT+FRM=146\r] 
Dec 12 12:04:31.67: [15945]: --> [7:CONNECT] 
Dec 12 12:04:31.67: [15945]: RECV: begin page 
Dec 12 12:04:33.46: [15945]: RECV: 0 total lines, 0 bad lines, 0 consecutive
bad lines 
Dec 12 12:04:33.46: [15945]: RECV: end page 
Dec 12 12:04:33.46: [15945]: --> [10:NO CARRIER] 
Dec 12 12:04:33.46: [15945]: <-- [9:AT+FRH=3\r] 
Dec 12 12:04:33.91: [15945]: --> [7:CONNECT] 
Dec 12 12:04:34.98: [15945]: --> [2:OK] 
Dec 12 12:04:34.98: [15945]: RECV FAX (000071631): recvq/fax000031575.tif
from --------, route to <unspecified>, 0 pages in 0:13 
Dec 12 12:04:34.98: [15945]: RECV FAX: COMREC invalid response received 
Dec 12 12:04:34.98: [15945]: <-- [9:AT+FTH=3\r] 
Dec 12 12:04:36.12: [15945]: --> [7:CONNECT] 
Dec 12 12:04:36.44: [15945]: --> [2:OK] 
Dec 12 12:04:36.44: [15945]: RECV FAX (000071631): session with --------
terminated abnormally: COMREC invalid response received 
Dec 12 12:04:36.44: [15945]: RECV FAX: bin/faxrcvd "recvq/fax000031575.tif"
"ttyC7" "000071631" "COMREC invalid response received" "" ""
Dec 12 12:04:36.45: [15945]: RECV FAX: end 
Dec 12 12:04:36.45: [15945]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*