Re: [hylafax-users] Incoming faxes routing based on called number

[Tom Rymes <trymes@xxxxxxxxxxxxxxxx>]

On Nov 28, 2005, at 2:19 AM, Thanos A. wrote:


> > What kind of modem do you have.
>
> It's a Conexant HSF PCI modem card, with latest Linuxant drivers,  
> Class
> 1.0 modem.
>
>
> > This is a difficult thing because everyone seems to have a different
> > presentation of DID, different hardware, different numbers of DID
> > digits, etc.
>
> Well, from what I have read and understood at the moment, I have set
> ServerTracing to 0xFFF, and the following parameters
>
> CallIDPattern:         "NAME="
> CallIDPattern:         "NMBR="
> CallIDPattern:         SHIELDED_DTMF
> CallIDAnswerLength:    10
>
> But can't get any useful information to extract DID.

I may be mistaken here, but DID will only work with a T1 or a PRI.  
Regular analog POTS lines do not send DID information. You can route  
the faxes based on incming callerID or by which phone line the call  
came in on (you would route by device in that case)

Tom


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*