Re: [hylafax-users] Can not reach server at host "localhost", port 4559

[Aidan Van Dyk <aidan@xxxxxxxx>]

* Bodo Meissner <bodo@xxxxxxxxx> [051118 18:47]:
 
 
> The "already running" message should be printed if the ps command found  
> a process hfaxd, faxq or maybe faxgetty.
> 
> If I understand it right this may happen when faxgetty is started in  
> /etc/inittab and you have USE_FAXGETTY=yes in /etc/default/hylafax.

But if you have faxgetty's in init, and USE_FAXGETTY=yes in
/etc/default/hylafax, you are going to have other problems, like 2
faxgetty's fighting over the modem and faxq seeing the modem bouncing
busy/ready.

> The code in /etc/iunit.d/hylafax could be changed to check every  
> process inidividually.

If you have faxgetty's running from init, make sure you don't have
USE_FAXGETTY=yes in /etc/default/hylafax.  Set it to "init".

a.

-- 
Aidan Van Dyk                                             aidan@xxxxxxxx
Senior Software Developer                          +1 215 438-4638 x8103
iFAX Solutions, Inc.                                http://www.ifax.com/

Attachment: signature.asc
Description: Digital signature