Re: [hylafax-users] information

[Max Mothwurf <hylafaxuser@xxxxxxx>]

Am Donnerstag 10 November 2005 06:49 schrieb Marko Denev:

> I have a HP Proliant DL380G3 server running White Box Linux (a
> derivative of Red Hat Enterprise Linux v3 for those like me who did/do
> not know about White Box Linux). Running Hylafax (version unknown as yet
> but it will be a few years old).

southpole:/home/axel # more /var/log/messages | grep HylaFax
[...]
Nov 10 08:36:02 southpole FaxQueuer[4313]: HylaFAX (tm) Version 4.2.2

> The onboard serial port has an external modem attached. What I have to
> do is either add a pci card with additional serial ports and attach
> external modems or obtain an all in one pci card with rj11 or 12 sockets
> to directly connect analog lines. The Proliant has 1 x PCI-X 130MHz slot
> and 2 x PCI-Extended 200MHz slots.
>
> For the short term I'm happy to work on the quick option, but do not
> know what serial card/s to buy as far as reliability and functionality
> is concerned.

Sorry, no idea about hardware....

> I have found a few Netcomm Smart modems and I'm thinking I could use
> them if unless some one will advise against this.

If Smart modems points into the direction of WinModems: Fingers off! Winmodems 
are a pure pain in the a***, make sure you have a 'full' modem.

> I have to upgrade from 1 line to a minimum of 4 lines.

OK

> If anyone can assist with ideas by all means throw them at me.

After all modems are recognized by the system just run faxaddmodem for all 
lines....

HTH

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*