Re: [hylafax-users] Enabling call identification

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Do AT#CID=1 *before* the line rings in minicom.  Do not run faxgetty at 
the same time (in case your uucp locking isn't working).

Lee.


Ricardo Albuquerque wrote:

> The service is ok, and I've already tested. I proceed with the 
> following test:
>
> - Call to the modem, with the console in minicom.
> - After the second ring, I've typed the AT#CID=1, and it returns ok.
> - The modem answered the call, but again I have no Caller ID.
>
> I was checking the file /var/log/messages and /var/spool/hylafax/log/, 
> where I supose the Caller ID should apear.
>
> I'm about to give up. Any magical trick?
>
> Thanks in advance,
>
>
> Ricardo Albuquerque
>
> ----- Original Message ----- From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
> To: "Ricardo Albuquerque" <rsouza@xxxxxxxxxxxxxxxxxxx>
> Cc: <hylafax-users@xxxxxxxxxxx>
> Sent: Friday, November 04, 2005 4:59 PM
> Subject: Re: [hylafax-users] Enabling call identification
>
>
> > Ricardo Albuquerque wrote:
> >
> > > I've sent the the AT#SID=1 to the modem using minicom as you 
> > > suggested, the modem returns a OK. But no Caller ID apears when the 
> > > subsequent call cames in.
> >
> >
> >
> > You see RING, RING, RING after AT#CID=1 and then OK, but no Caller*ID 
> > stuff?  Do you have Caller*ID service from your telephone company?
> >
> > Lee.
> >
> > ____________________ HylaFAX(tm) Users Mailing List 
> > _______________________
> >  To subscribe/unsubscribe, click 
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> > /dev/null
> >  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*