Re: [hylafax-users] Atx command and Eicon Diva Server 4BRI

[Chris Parsons <chrisp@xxxxxxxxxxxxxx>]

The eicon drivers do not support atx3 and nor should you need it. I believe
that you may have mis-diagnosed your problem. Have a look through your
logs.. Both Hylafax and the Eicon drivers have the capabilities of very good
logging, so enabling max logging should help track down the cause of your
problem.



Regards,



Chris Parsons
InfoTec Communications.

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Carlo Farinella
Sent: Tuesday, 18 October 2005 7:00 PM
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] Atx command and Eicon Diva Server 4BRI


Hi all,

i've got a strange problem with my Eicon Diva Server 4BRI. When i try to 
send a fax the modem reply me with a busy signal, so after a small 
search i understand i need one of the atx commands (atx3 i think)...the 
problem is that the device don't understand this kind of command, and 
minicom confirm it, here's an example. Any ideas?

atz
OK
at&e710
OK
atx3
ERROR
atx2
ERROR
atx1
ERROR
atx4
ERROR
atdt712
BUSY

I'm using a slackware 10.2 with kernel 2.4.31, Eicon Melware drivers 
with no capi support). Tha device can receive fax perfectly, but can't send.
Thanks in advance.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*