Re: [hylafax-users] Hylafax and HSF Modem setup

[JC van der Walt <jc@xxxxxxxxxxxxxxxxx>]

Linuxant support replied that I should use the 'AT &F X1' init. string 
to see if there is a difference for the 'no carrier' issue.  They also 
suggested rebooting.  Well, I did, several times. 

I can't seem to find where to put this init string however.  
/var/spool/hylafax/etc/config.modem  looked promising but on the other 
hand I thought it would use data from Class1 or Class1.0 config files?  
Where in Hylafax config should I put the 'AT &F X1' init. string?

Sorry Lee - the syslog was this:
----------------------------------------------------------------------------------------------------------
Oct 13 16:15:36 localhost FaxQueuer[3030]: HylaFAX (tm) Version 4.2.2
Oct 13 16:15:36 localhost FaxQueuer[3030]: Copyright (c) 1990-1996 Sam 
Leffler
Oct 13 16:15:36 localhost FaxQueuer[3030]: Copyright (c) 1991-1996 
Silicon Graphics, Inc.
Oct 13 16:15:36 localhost FaxGetty[2895]: HELLO
Oct 13 16:15:36 localhost HylaFAX[3032]: HylaFAX INET Protocol Server: 
restarted.
Oct 13 16:15:43 localhost FaxGetty[2895]: QUIT
Oct 13 16:15:43 localhost FaxGetty[2895]: CLOSE /dev/modem
Oct 13 16:15:43 localhost FaxGetty[3044]: OPEN /dev/modem  HylaFAX (tm) 
Version 4.2.2
Oct 13 16:15:53 localhost FaxGetty[3044]: MODEM ROCKWELL 
RC288DPi/hsfmodem-7.18.00.06full
Oct 13 16:15:56 localhost FaxGetty[3068]: OPEN /dev/modem  HylaFAX (tm) 
Version 4.2.2
Oct 13 16:15:56 localhost FaxGetty[3068]: /dev/modem: Can not lock device.
Oct 13 16:17:05 localhost FaxGetty[3068]: MODEM HSFMODEM-7.18.00.06FULL 
56000/
Oct 13 16:17:58 localhost FaxGetty[3068]: LOCKWAIT
Oct 13 16:18:08 localhost FaxSend[3261]: MODEM HSFMODEM-7.18.00.06FULL 
56000/
Oct 13 16:18:08 localhost FaxSend[3261]: SEND FAX: JOB 7 DEST 2085031 
COMMID 000000014 DEVICE '/dev/modem'
Oct 13 16:18:22 localhost FaxQueuer[3030]: SUBMIT JOB 8
Oct 13 16:19:10 localhost FaxSend[3261]: SEND FAILED: JOB 7 DEST 2085031 
ERR No carrier detected
Oct 13 16:19:10 localhost FaxQueuer[3030]: NOTIFY: bin/notify "doneq/q7" 
"failed" "1:12"
Oct 13 16:19:10 localhost FaxGetty[3068]: LOCKWAIT
Oct 13 16:19:11 localhost FaxQueuer[3030]: NOTIFY exit status: 0 (3294)
Oct 13 16:19:25 localhost FaxSend[3335]: MODEM HSFMODEM-7.18.00.06FULL 
56000/
Oct 13 16:19:25 localhost FaxSend[3335]: SEND FAX: JOB 8 DEST 2085031 
COMMID 000000015 DEVICE '/dev/modem'
Oct 13 16:20:27 localhost FaxSend[3335]: SEND FAILED: JOB 8 DEST 2085031 
ERR No carrier detected
Oct 13 16:20:27 localhost FaxQueuer[3030]: NOTIFY: bin/notify "sendq/q8" 
"requeued" "" "16:25"
Oct 13 16:20:28 localhost FaxQueuer[3030]: NOTIFY exit status: 0 (3345)
Oct 13 16:20:48 localhost FaxGetty[3068]: MODEM HSFMODEM-7.18.00.06FULL 
56000/
------------------------------------------------------------------------------------------------------------------

Confused,
J

Lee Howard wrote:

> This is the session log not syslog.
>
> And, the NO CARRIER message is coming from the modem, so... you'd 
> probably need to contact Linuxant for a resolution to this.  They 
> recently suggested to someone that they use an ATX command in their 
> dialstring.
>
> Lee.
>
>
> JC van der Walt wrote:
>
> > Thanks Lee!
> >
> > So I got a key from them and the driver seems to be just peachy now.  
> > Only now the syslog now tells me "no carrier detected":
> >
> > The fax logfile:
> > --------------- Snippet: /var/spool/hylafax/log/c4 
> > -----------------------
> > Oct 13 13:52:45.24: [ 3220]: SESSION BEGIN 000000004 14032881669
> > Oct 13 13:52:45.24: [ 3220]: HylaFAX (tm) Version 4.2.2
> > Oct 13 13:52:45.24: [ 3220]: SEND FAX: JOB 3 DEST 2881669 COMMID 
> > 000000004 DEVICE '/dev/modem'
> > Oct 13 13:52:45.24: [ 3220]: <-- [12:AT+FCLASS=1\r]
> > Oct 13 13:52:45.26: [ 3220]: --> [2:OK]
> > Oct 13 13:52:45.27: [ 3220]: DIAL 2881669
> > Oct 13 13:52:45.27: [ 3220]: <-- [12:ATDT2881669\r]
> > Oct 13 13:53:47.51: [ 3220]: --> [10:NO CARRIER]
> > Oct 13 13:53:47.51: [ 3220]: SEND FAILED: JOB 3 DEST 2881669 ERR No 
> > carrier detected
> > Oct 13 13:53:47.51: [ 3220]: <-- [5:ATH0\r]
> > Oct 13 13:53:47.54: [ 3220]: --> [2:OK]
> > Oct 13 13:53:47.54: [ 3220]: SESSION END
> > --------------------------------------------------------------------------- 
> >
> >
> > Hylafax seems to think the modem is just fine
> > #cat status/modem
> > Running and idle
> > #
> >
> > Apparently there used to be a bug related to this issue.  But the 
> > status looks to be resolved.
> > Any ideas?
> > Lee Howard wrote:
> >
> > > JC van der Walt wrote:
> > >
> > > > AT+FCLASS=?
> > > > 0
> > > >
> > > > OK 
> > >
> > >
> > >
> > >
> > >
> > > The Linuxant drivers only support fax with the registered version.  
> > > It's like $15.
> > >
> > > Lee.
> >
> >
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List 
> > _______________________
> >  To subscribe/unsubscribe, click 
> > http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < 
> > /dev/null
> >  *To learn about expensive HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*