![]() |
How can I requeue the job after errors like the following? It immediately fails, but I would rather it requeue the job and try again in 300 seconds. Thanks, --Eric Sep 26 10:46:55.14: [ 3540]: <-- data [2] Sep 26 10:46:55.14: [ 3540]: <-- data [2] Sep 26 10:46:57.62: [ 3540]: Control channel selected Sep 26 10:46:57.62: [ 3540]: <-- data [7] Sep 26 10:46:57.62: [ 3540]: <-- data [2] Sep 26 10:46:57.62: [ 3540]: SEND send PPS (partial page signal) Sep 26 10:46:57.62: [ 3540]: SEND send EOP (no more pages or documents) Sep 26 10:46:59.89: [ 3540]: Control channel retrain Sep 26 10:47:09.91: [ 3540]: EOT received (end of transmission) Sep 26 10:47:09.91: [ 3540]: <-- data [7] Sep 26 10:47:09.91: [ 3540]: <-- data [2] Sep 26 10:47:09.91: [ 3540]: SEND send PPS (partial page signal) Sep 26 10:47:09.91: [ 3540]: SEND send EOP (no more pages or documents) Sep 26 10:47:10.07: [ 3540]: HDLC frame too short (0 bytes) Sep 26 10:47:10.07: [ 3540]: <-- data [7] Sep 26 10:47:10.07: [ 3540]: <-- data [2] Sep 26 10:47:10.07: [ 3540]: SEND send PPS (partial page signal) Sep 26 10:47:10.07: [ 3540]: SEND send EOP (no more pages or documents) Sep 26 10:47:10.07: [ 3540]: HDLC frame too short (0 bytes) Sep 26 10:47:10.07: [ 3540]: No response to PPS repeated 3 times. Sep 26 10:47:10.07: [ 3540]: SEND end page Sep 26 10:47:10.07: [ 3540]: <-- data [3] Sep 26 10:47:10.07: [ 3540]: <-- data [2] Sep 26 10:47:10.07: [ 3540]: SEND FAILED: JOB 2744 DEST ,,704-357-xxxx ERR No response to PPS repeated 3 times.; too many attempts to send Sep 26 10:47:10.07: [ 3540]: <-- data [2] Sep 26 10:48:10.07: [ 3540]: <-- [5:ATH0\r] Sep 26 10:48:10.29: [ 3540]: --> [2:OK] Sep 26 10:48:10.29: [ 3540]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*