Re: [hylafax-users] Ring detected without successful handshake

To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Ring detected without successful handshake
From: Tim Paulus <lacobrts@xxxxxxxxx>
Date: Wed, 14 Sep 2005 10:20:39 -0700 (PDT)
Well, that didn't yield any more information in the
log, perhaps I'm missing something.  I switched to
class 1.0 with the SessionTracing set to 0xFFF and got
the same end result with this log:

Sep 14 13:10:24.47: [12703]: SESSION BEGIN 000000011
xxxxxxxxxx
Sep 14 13:10:24.47: [12703]: HylaFAX (tm) Version
4.2.1
Sep 14 13:10:24.47: [12703]: <-- [4:ATA\r]
Sep 14 13:10:38.15: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.15: [12703]: ANSWER: FAX CONNECTION 
DEVICE '/dev/ttyS14'
Sep 14 13:10:38.15: [12703]: STATE CHANGE: ANSWERING
-> RECEIVING
Sep 14 13:10:38.15: [12703]: MODEM input buffering
enabled
Sep 14 13:10:38.15: [12703]: RECV FAX: begin
Sep 14 13:10:38.15: [12703]: MODEM input buffering
disabled
Sep 14 13:10:38.15: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:38.15: [12703]: <-- data [32]
Sep 14 13:10:38.15: [12703]: <-- data [2]
Sep 14 13:10:38.15: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.15: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:38.15: [12703]: <-- data [23]
Sep 14 13:10:38.15: [12703]: <-- data [2]
Sep 14 13:10:38.16: [12703]: --> [7:CONNECT]
Sep 14 13:10:38.16: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:38.16: [12703]: <-- data [10]
Sep 14 13:10:38.16: [12703]: <-- data [2]
Sep 14 13:10:40.35: [12703]: --> [2:OK]
Sep 14 13:10:40.35: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:40.37: [12703]: --> [7:CONNECT]
Sep 14 13:10:41.01: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:41.01: [12703]: --> [2:OK]
Sep 14 13:10:41.01: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:41.02: [12703]: --> [7:CONNECT]
Sep 14 13:10:41.71: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:41.71: [12703]: --> [2:OK]
Sep 14 13:10:41.71: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:41.72: [12703]: --> [7:CONNECT]
Sep 14 13:10:42.14: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:42.14: [12703]: --> [2:OK]
Sep 14 13:10:42.14: [12703]: DELAY 1500 ms
Sep 14 13:10:43.64: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:44.60: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.60: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:44.60: [12703]: <-- data [32]
Sep 14 13:10:44.60: [12703]: <-- data [2]
Sep 14 13:10:44.60: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.60: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:44.61: [12703]: <-- data [23]
Sep 14 13:10:44.61: [12703]: <-- data [2]
Sep 14 13:10:44.61: [12703]: --> [7:CONNECT]
Sep 14 13:10:44.61: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:44.61: [12703]: <-- data [10]
Sep 14 13:10:44.61: [12703]: <-- data [2]
Sep 14 13:10:46.82: [12703]: --> [2:OK]
Sep 14 13:10:46.82: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:46.86: [12703]: --> [7:CONNECT]
Sep 14 13:10:48.32: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:48.32: [12703]: --> [2:OK]
Sep 14 13:10:48.32: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:48.33: [12703]: --> [7:CONNECT]
Sep 14 13:10:49.02: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:49.02: [12703]: --> [2:OK]
Sep 14 13:10:49.02: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:49.03: [12703]: --> [7:CONNECT]
Sep 14 13:10:49.46: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:49.46: [12703]: --> [2:OK]
Sep 14 13:10:49.46: [12703]: DELAY 1500 ms
Sep 14 13:10:50.95: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:51.91: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.91: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:51.91: [12703]: <-- data [32]
Sep 14 13:10:51.91: [12703]: <-- data [2]
Sep 14 13:10:51.91: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.91: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:51.92: [12703]: <-- data [23]
Sep 14 13:10:51.92: [12703]: <-- data [2]
Sep 14 13:10:51.92: [12703]: --> [7:CONNECT]
Sep 14 13:10:51.92: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:51.92: [12703]: <-- data [10]
Sep 14 13:10:51.92: [12703]: <-- data [2]
Sep 14 13:10:54.13: [12703]: --> [2:OK]
Sep 14 13:10:54.13: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:54.17: [12703]: --> [7:CONNECT]
Sep 14 13:10:55.63: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:10:55.63: [12703]: --> [2:OK]
Sep 14 13:10:55.63: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:55.63: [12703]: --> [7:CONNECT]
Sep 14 13:10:56.33: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:10:56.33: [12703]: --> [2:OK]
Sep 14 13:10:56.33: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:10:56.33: [12703]: --> [7:CONNECT]
Sep 14 13:10:56.76: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:10:56.76: [12703]: --> [2:OK]
Sep 14 13:10:56.76: [12703]: DELAY 1500 ms
Sep 14 13:10:58.26: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:10:59.22: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.22: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:10:59.22: [12703]: <-- data [32]
Sep 14 13:10:59.22: [12703]: <-- data [2]
Sep 14 13:10:59.22: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.22: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:10:59.22: [12703]: <-- data [23]
Sep 14 13:10:59.22: [12703]: <-- data [2]
Sep 14 13:10:59.23: [12703]: --> [7:CONNECT]
Sep 14 13:10:59.23: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:10:59.23: [12703]: <-- data [10]
Sep 14 13:10:59.23: [12703]: <-- data [2]
Sep 14 13:11:01.44: [12703]: --> [2:OK]
Sep 14 13:11:01.44: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:04.11: [12703]: --> [7:CONNECT]
Sep 14 13:11:05.60: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:11:05.60: [12703]: --> [2:OK]
Sep 14 13:11:05.60: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:05.61: [12703]: --> [7:CONNECT]
Sep 14 13:11:06.30: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:11:06.30: [12703]: --> [2:OK]
Sep 14 13:11:06.30: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:06.31: [12703]: --> [7:CONNECT]
Sep 14 13:11:06.74: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:11:06.74: [12703]: --> [2:OK]
Sep 14 13:11:06.74: [12703]: DELAY 1500 ms
Sep 14 13:11:08.24: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:11:09.19: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.19: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:11:09.19: [12703]: <-- data [32]
Sep 14 13:11:09.19: [12703]: <-- data [2]
Sep 14 13:11:09.20: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.20: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:11:09.20: [12703]: <-- data [23]
Sep 14 13:11:09.20: [12703]: <-- data [2]
Sep 14 13:11:09.20: [12703]: --> [7:CONNECT]
Sep 14 13:11:09.20: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:11:09.20: [12703]: <-- data [10]
Sep 14 13:11:09.20: [12703]: <-- data [2]
Sep 14 13:11:11.41: [12703]: --> [2:OK]
Sep 14 13:11:11.41: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:11.44: [12703]: --> [7:CONNECT]
Sep 14 13:11:12.89: [12703]: --> HDLC<16:FF C0 04 00
00 6A AA AA 00 31 09 01 48 D0 13 2C>
Sep 14 13:11:12.89: [12703]: --> [2:OK]
Sep 14 13:11:12.89: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:12.90: [12703]: --> [7:CONNECT]
Sep 14 13:11:13.59: [12703]: --> HDLC<25:FF C0 02 EC
EC 0C CC EC 0C 2C 1C EC 6C 8C 04 04 04 04 04 04 04 04
04 3A 40>
Sep 14 13:11:13.59: [12703]: --> [2:OK]
Sep 14 13:11:13.59: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:13.60: [12703]: --> [7:CONNECT]
Sep 14 13:11:14.03: [12703]: --> HDLC<15:FF C8 01 04
77 1D 23 01 89 01 01 19 00 2B 8F>
Sep 14 13:11:14.03: [12703]: --> [2:OK]
Sep 14 13:11:14.03: [12703]: DELAY 1500 ms
Sep 14 13:11:15.53: [12703]: <-- [9:AT+FTH=3\r]
Sep 14 13:11:16.48: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.48: [12703]: <-- HDLC<32:FF C0 04 AD
00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E
CE 96 F6 76 04 2C 74 4C 74 8C>
Sep 14 13:11:16.48: [12703]: <-- data [32]
Sep 14 13:11:16.48: [12703]: <-- data [2]
Sep 14 13:11:16.49: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.49: [12703]: <-- HDLC<23:FF C0 02 EC
04 9E B6 A6 26 86 C6 82 04 9E C6 86 E6 A6 32 04 04 04
04>
Sep 14 13:11:16.49: [12703]: <-- data [23]
Sep 14 13:11:16.49: [12703]: <-- data [2]
Sep 14 13:11:16.49: [12703]: --> [7:CONNECT]
Sep 14 13:11:16.49: [12703]: <-- HDLC<10:FF C8 01 04
76 5F 23 01 FB C0>
Sep 14 13:11:16.49: [12703]: <-- data [10]
Sep 14 13:11:16.49: [12703]: <-- data [2]
Sep 14 13:11:18.70: [12703]: --> [2:OK]
Sep 14 13:11:18.70: [12703]: <-- [9:AT+FRH=3\r]
Sep 14 13:11:21.80: [12703]: --> [0:]
Sep 14 13:11:21.80: [12703]: MODEM <Empty line>
Sep 14 13:11:21.80: [12703]: MODEM TIMEOUT: waiting
for v.21 carrier
Sep 14 13:11:21.80: [12703]: <-- data [1]
Sep 14 13:11:21.81: [12703]: --> [2:]
Sep 14 13:11:21.81: [12703]: --> [2:OK]
Sep 14 13:11:21.81: [12703]: RECV FAX: RSPREC invalid
response received
Sep 14 13:11:21.81: [12703]: RECV FAX: end
Sep 14 13:11:21.81: [12703]: SESSION END


--- Lee Howard <faxguy@xxxxxxxxxxxxxxxx> wrote:

> I think that you need to turn up your SessionTracing
> to something like 
> 0xFFF.
> 
> Lee.
> 
> 
> Tim Paulus wrote:
> 
> >In general, I can send and receive faxes.  However,
> >one fax that I attempt to send to my hylafax server
> >always fails.  Here's the log:
> >
> >Sep 13 13:24:38.64: [ 2101]: SESSION BEGIN
> 000000004
> >16784073077
> >Sep 13 13:24:38.64: [ 2101]: HylaFAX (tm) Version
> >4.2.1
> >Sep 13 13:24:38.64: [ 2101]: <--
> >[20:AT+FCC=1,,,,,,,,0;A\r]
> >Sep 13 13:25:30.51: [ 2101]: --> [6:+FHS:0]
> >Sep 13 13:25:30.51: [ 2101]: REMOTE HANGUP: Normal
> and
> >proper end of connection (code 0)
> >Sep 13 13:25:30.51: [ 2101]: ANSWER: Ring detected
> >without successful handshake
> >Sep 13 13:25:30.51: [ 2101]: SESSION END
> >
> >Notice the long delay between +FCC and +FHS.  
> >
> >I have access to this sending fax machine (it's a
> fax
> >store and forward server) and I can fax from it to
> >another fax machine just fine, I just can't fax
> from
> >it to my hylafax server.
> >
> >Hylafax version: 4.2.1
> >OS: Redhat Fedora Core 4, kernel 2.6.11-1.1369_FC4
> >Modem: Multi-tech Systems MT5634ZPX-PCI-U
> >
> >I can't seem to make any progress on this one.  It
> >looks to me like the modems initiate a connection
> but
> >the sending modem never acknowledges the connection
> >and eventually hangs up.  Has anyone seen this
> before?
> >
> >
> >
> >		
> >__________________________________ 
> >Yahoo! Mail - PC Magazine Editors' Choice 2005 
> >http://mail.yahoo.com
> >
> >____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >  To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> > On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
> >  *To learn about expensive HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
> >
> >  
> >
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe
> hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support,
> mail sales@xxxxxxxxx*
> 
> 



		
__________________________________ 
Yahoo! Mail - PC Magazine Editors' Choice 2005 
http://mail.yahoo.com

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Follow-Ups:
- Re: [hylafax-users] Ring detected without successful handshake
  - From: Stephen Carville
- Re: [hylafax-users] Ring detected without successful handshake
  - From: Lee Howard
References:
- Re: [hylafax-users] Ring detected without successful handshake
  - From: Lee Howard
Prev by Date: [hylafax-users] custom error message replies
Next by Date: Re: [hylafax-users] MultiTech ISI5634UPCI/8
Previous by thread: Re: [hylafax-users] Ring detected without successful handshake
Next by thread: Re: [hylafax-users] Ring detected without successful handshake
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions