Re: [hylafax-users] Hylafax Server and Client config

["James McCall" <jmccall@xxxxxxxxxxxxxxxxxxxx>]

Since this box is only going to be used for hylafax it's easy to just dump
everything and restart with a fresh OS each time. The last run through I was
able to get the machine on the network, so I have that part worked out. But
like an idiot I did the RPM install and the faxaddmodem routine wouldn't
find my modem that time around. 

I'm reinstalling the OS and will start again from source and see if I can
get everything back up to the test fax again.

As for reading the installation docs. I did go through them step by step on
the first run, however they assume everything else is working. :) 

Looks like I'm on my own here until I get that test fax working again.

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Jeff Schulze
Sent: Monday, September 12, 2005 5:37 PM
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Hylafax Server and Client config

James; that is a long, long, long email your asking for. I was pretty 
much where you are, and found the best course of action to be takeing a 
good hard look at the Hylafax installation documentation on Hylafax.org. 
You can ask specific questions here, but not sure anyone can help you 
with that entire process without hireing them. :) (Ask Lee about that 
though.) As for it not showing up on a windows network, you may take a 
look at your Samba configuration; as that is pretty much where Linux and 
windows meet.

Good luck!

Jeff S.
Network Admin
Luna Piena, Inc.

James McCall wrote:

>First off, although I'm not new to Linux, I probably would be considered a
>neophyte by many, so please excuse my ignorance. 
>
>I have installed CentOS 4.0 and Hylafax and can get the Hylafax box to send
>a test fax from the command line. My problem lies in two areas. First, I
>cannot get the hylafax box to display consistently on the network. I was
>able to get it in the display for a brief period, but I think that in an
>attempt to get other things working I messed it up.
>
>So, step by step could someone help me get the box up and have the modem
>shared for a windows client?
>
>Thanks so much in advance.
>
>James
>
>
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>
>  
>



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*