[hylafax-users] hylafax

["Ercan Istek" <ercan@xxxxxxxxx>]

Having the following error ?

any solution for this ?

 

 

Jun 29 14:11:36.92: [24801]: SESSION BEGIN 000000727 902562310468
Jun 29 14:11:36.92: [24801]: HylaFAX (tm) Version 4.2.1
Jun 29 14:11:36.93: [24801]: <-- [4:ATA\r]
Jun 29 14:11:42.98: [24801]: --> [7:CONNECT]
Jun 29 14:11:42.98: [24801]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Jun 29 14:11:42.98: [24801]: RECV FAX: begin
Jun 29 14:11:44.91: [24801]: --> [7:CONNECT]
Jun 29 14:11:45.73: [24801]: --> [7:CONNECT]
Jun 29 14:11:46.30: [24801]: --> [2:OK]
Jun 29 14:11:46.31: [24801]: <-- [9:AT+FRH=3\r]
Jun 29 14:11:46.77: [24801]: --> [7:CONNECT]
Jun 29 14:11:48.23: [24801]: --> [2:OK]
Jun 29 14:11:48.23: [24801]: REMOTE TSI "90 312 2650262"
Jun 29 14:11:48.23: [24801]: <-- [9:AT+FRH=3\r]
Jun 29 14:11:48.24: [24801]: --> [7:CONNECT]
Jun 29 14:11:48.55: [24801]: --> [2:OK]
Jun 29 14:11:48.55: [24801]: REMOTE wants 14400 bit/s
Jun 29 14:11:48.55: [24801]: REMOTE wants A4 page width (215 mm)
Jun 29 14:11:48.55: [24801]: REMOTE wants unlimited page length
Jun 29 14:11:48.55: [24801]: REMOTE wants 3.85 line/mm
Jun 29 14:11:48.55: [24801]: REMOTE wants 2-D MMR
Jun 29 14:11:48.55: [24801]: REMOTE wants T.30 Annex A, 256-byte ECM
Jun 29 14:11:48.55: [24801]: RECV training at v.17 14400 bit/s
Jun 29 14:11:48.55: [24801]: <-- [11:AT+FRM=145\r]
Jun 29 14:11:50.25: [24801]: --> [7:CONNECT]
Jun 29 14:11:51.83: [24801]: RECV: TCF 2807 bytes, 1% non-zero, 2757 zero-run
Jun 29 14:11:51.84: [24801]: --> [10:NO CARRIER]
Jun 29 14:11:51.84: [24801]: DELAY 75 ms
Jun 29 14:11:51.91: [24801]: TRAINING succeeded
Jun 29 14:11:51.92: [24801]: <-- [9:AT+FTH=3\r]
Jun 29 14:11:51.96: [24801]: --> [7:CONNECT]
Jun 29 14:11:53.28: [24801]: --> [2:OK]
Jun 29 14:11:53.28: [24801]: <-- [11:AT+FRM=146\r]
Jun 29 14:12:00.38: [24801]: --> [2:OK]
Jun 29 14:12:00.38: [24801]: <-- [9:AT+FRS=7\r]
Jun 29 14:12:00.52: [24801]: --> [2:OK]
Jun 29 14:12:00.52: [24801]: RECV FAX (000000727): from 90 312 2650262, page 1 in 0:09, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
Jun 29 14:12:00.52: [24801]: RECV FAX (000000727): recvq/fax000000722.tif from 90 312 2650262, route to <unspecified>, 1 pages in 0:18
Jun 29 14:12:00.52: [24801]: RECV FAX: Failed to properly detect high-speed data carrier.
Jun 29 14:12:00.52: [24801]: <-- [9:AT+FTH=3\r]
Jun 29 14:12:00.58: [24801]: --> [7:CONNECT]
Jun 29 14:12:01.90: [24801]: --> [2:OK]
Jun 29 14:12:01.90: [24801]: RECV FAX (000000727): session with 90 312 2650262 terminated abnormally: Failed to properly detect high-speed data carrier.
Jun 29 14:12:01.90: [24801]: RECV FAX: bin/faxrcvd "recvq/fax000000722.tif" "ttyS0" "000000727" "Failed to properly detect high-speed data carrier." "" ""
Jun 29 14:12:01.90: [24801]: RECV FAX: end
Jun 29 14:12:01.90: [24801]: SESSION END

 

The facsimile was automatically dispatched to: faxlar.