Re: [hylafax-users] error sending a document to a fax service

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

steve_cn wrote:

> Jun 26 17:11:36.97: [11605]: SEND send EOP (no more pages or documents)
> Jun 26 17:11:36.97: [11605]: <-- [9:AT+FTH=3\r]
> Jun 26 17:11:37.02: [11605]: --> [7:CONNECT]
> Jun 26 17:11:37.02: [11605]: <-- HDLC<3:FF C8 F4>
> Jun 26 17:11:37.02: [11605]: <-- data [3]
> Jun 26 17:11:37.02: [11605]: <-- data [2]
> Jun 26 17:11:38.33: [11605]: --> [2:OK]
> Jun 26 17:11:38.33: [11605]: <-- [9:AT+FRH=3\r]
> Jun 26 17:11:39.79: [11605]: --> [7:CONNECT]
> Jun 26 17:11:42.34: [11605]: --> [2:10 03]
> Jun 26 17:11:42.34: [11605]: --> [5:ERROR]
> Jun 26 17:11:42.34: [11605]: MODEM Command error
> Jun 26 17:11:42.34: [11605]: FCS error
> Jun 26 17:11:42.34: [11605]: SEND send EOP (no more pages or documents)


Current HylaFAX CVS HEAD (to become 4.2.2) treats this situation 
differently.  Instead of repeating the EOP signal the CRP signal is sent 
instead on an FCS error.  This seems to have better results.  You may 
want to try updating to current CVS HEAD.

However, the problem is most likely that the receiver is not pausing th 
requisite time before transmitting MCF or RTN.  Is the receiver getting 
the page just fine?

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*