Re: [hylafax-users] MultiModemISI

[George Hansper <george-lists@xxxxxxxxxxxxx>]

Yes, we have one of these.

It works well enough using Hylafax 4.1.5 on Red Hat ES3 (kernel 2.4.21),
using the driver 3.09 from Multitech.

I have it receiving faxes on Hylafax 4.2.1 on Red Hat ES4 (kernel 2.6.9),
but I had to build the driver module separately.
I used the generic kernel driver, with a slight modification to get the driver to install.

SENDING faxes with Hylafax 4.2.1 on a 2.6.x series kernel is giving me problems,
some of which I solved by adding the following to /var/spool/hylafax/etc/config:

	Use2D:                  No

I'm still investigating whether the problems are due to Hylafax 4.2.1 or
the kernel driver, but I suspect it's hylafax.

Regards,
	George Hansper


Lee Howard wrote:
> Conlan Adams wrote:
>
> > Any one using one of these with hylafax?
>
> Yes, I'm sure there are many of us.
>
> >  Looking into setting one up to
> > add four lines to my fax server.  Just wanted to see if any one has
> > experience with it, or if I should look for something else.
> >  
>
> They work well for me.
>
> Lee.
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*