HylaFAX The world's most advanced open source fax server
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Failed to properly detect high-speed data carrier

Hello i'm running hylafax 4.2.1 on a i386 machine

I've a multitech 5656 modem and i've try the rc288dpi-1 prototype so my config.ttyS0 is:

ModemType: Class1 # use this to supply a hint
ModemRate: 19200 # rate for DCE-DTE communication
ModemFlowControl: rtscts # default
#
ModemNoFlowCmd: AT&K0 # setup no flow control
ModemHardFlowCmd: AT&K3 # setup hardware flow control
ModemSoftFlowCmd: AT&K4 # setup software flow control
ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem
ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd: !Rockwell
ModemModelQueryCmd: !RC288DPi
ModemRevQueryCmd: ATI3 # product information
#
ModemDialCmd: ATDT%s # T for tone dialing
<<<<<<<

Problem is that I get serveral errors a days on receiving fax.
They are all "Failed to properly detect high-speed data carrier"


The full document was not received because:

Failed to properly detect high-speed data carrier.

---- Transcript of session follows ----

May 24 09:14:35.45: [ 1218]: SESSION BEGIN 000001501 334150384415005
May 24 09:14:35.45: [ 1218]: HylaFAX (tm) Version 4.2.1
May 24 09:14:35.45: [ 1218]: <-- [4:ATA\r]
May 24 09:14:41.70: [ 1218]: --> [7:CONNECT]
May 24 09:14:41.70: [ 1218]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
May 24 09:14:41.70: [ 1218]: RECV FAX: begin
May 24 09:14:43.62: [ 1218]: --> [7:CONNECT]
May 24 09:14:44.45: [ 1218]: --> [7:CONNECT]
May 24 09:14:45.00: [ 1218]: --> [2:OK]
May 24 09:14:45.00: [ 1218]: <-- [9:AT+FRH=3\r]
May 24 09:14:45.46: [ 1218]: --> [7:CONNECT]
May 24 09:14:46.88: [ 1218]: --> [2:OK]
May 24 09:14:46.88: [ 1218]: REMOTE TSI ""
May 24 09:14:46.88: [ 1218]: <-- [9:AT+FRH=3\r]
May 24 09:14:46.90: [ 1218]: --> [7:CONNECT]
May 24 09:14:47.16: [ 1218]: --> [2:OK]
May 24 09:14:47.16: [ 1218]: REMOTE wants 14400 bit/s
May 24 09:14:47.16: [ 1218]: REMOTE wants A4 page width (215 mm)
May 24 09:14:47.16: [ 1218]: REMOTE wants unlimited page length
May 24 09:14:47.16: [ 1218]: REMOTE wants 3.85 line/mm
May 24 09:14:47.16: [ 1218]: REMOTE wants 1-D MH
May 24 09:14:47.16: [ 1218]: REMOTE wants T.30 Annex A, 256-byte ECM
May 24 09:14:47.16: [ 1218]: RECV training at v.17 14400 bit/s
May 24 09:14:47.16: [ 1218]: <-- [11:AT+FRM=145\r]
May 24 09:14:48.90: [ 1218]: --> [7:CONNECT]
May 24 09:14:50.45: [ 1218]: RECV: TCF 2763 bytes, 0% non-zero, 2744 zero-run
May 24 09:14:50.46: [ 1218]: --> [10:NO CARRIER]
May 24 09:14:50.46: [ 1218]: DELAY 75 ms
May 24 09:14:50.54: [ 1218]: TRAINING succeeded
May 24 09:14:50.54: [ 1218]: <-- [9:AT+FTH=3\r]
May 24 09:14:50.58: [ 1218]: --> [7:CONNECT]
May 24 09:14:51.88: [ 1218]: --> [2:OK]
May 24 09:14:51.88: [ 1218]: <-- [11:AT+FRM=146\r]
May 24 09:14:52.46: [ 1218]: --> [7:CONNECT]
May 24 09:14:52.84: [ 1218]: RECV received frame number 0
May 24 09:14:52.99: [ 1218]: RECV received frame number 1
May 24 09:14:53.15: [ 1218]: RECV received frame number 2
May 24 09:14:53.30: [ 1218]: RECV received frame number 3
May 24 09:14:53.46: [ 1218]: RECV received frame number 4
May 24 09:14:53.62: [ 1218]: RECV received frame number 5
May 24 09:14:53.76: [ 1218]: RECV received frame number 6
May 24 09:14:53.91: [ 1218]: RECV received frame number 7
May 24 09:14:54.05: [ 1218]: RECV received frame number 8
May 24 09:14:54.21: [ 1218]: RECV received frame number 9
May 24 09:14:54.36: [ 1218]: RECV received frame number 10
May 24 09:14:54.52: [ 1218]: RECV received frame number 11
May 24 09:14:54.59: [ 1218]: RECV received frame number 12
May 24 09:14:54.75: [ 1218]: RECV received frame number 13
May 24 09:14:54.90: [ 1218]: RECV received frame number 14
May 24 09:14:55.06: [ 1218]: RECV received frame number 15
May 24 09:14:55.22: [ 1218]: RECV received frame number 16
May 24 09:14:55.37: [ 1218]: RECV received frame number 17
May 24 09:14:55.52: [ 1218]: RECV received frame number 18
May 24 09:14:55.67: [ 1218]: RECV received frame number 19
May 24 09:14:55.83: [ 1218]: RECV received frame number 20
May 24 09:14:55.98: [ 1218]: RECV received frame number 21
May 24 09:14:56.13: [ 1218]: RECV received frame number 22
May 24 09:14:56.28: [ 1218]: RECV received frame number 23
May 24 09:14:56.42: [ 1218]: RECV received frame number 24
May 24 09:14:56.58: [ 1218]: RECV received frame number 25
May 24 09:14:56.66: [ 1218]: RECV received frame number 26
May 24 09:14:56.82: [ 1218]: RECV received frame number 27
May 24 09:14:56.98: [ 1218]: RECV received frame number 28
May 24 09:14:57.12: [ 1218]: RECV received frame number 29
May 24 09:14:57.26: [ 1218]: RECV received frame number 30
May 24 09:14:57.41: [ 1218]: RECV received frame number 31
May 24 09:14:57.57: [ 1218]: RECV received frame number 32
May 24 09:14:57.72: [ 1218]: RECV received frame number 33
May 24 09:14:57.88: [ 1218]: RECV received frame number 34
May 24 09:14:58.04: [ 1218]: RECV received frame number 35
May 24 09:14:58.19: [ 1218]: RECV received frame number 36
May 24 09:14:58.27: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.35: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:14:58.42: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xfc
May 24 09:14:58.42: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.50: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.50: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:58.50: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xfc
May 24 09:14:58.58: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:58.58: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.58: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.58: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xe0
May 24 09:14:58.74: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.82: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:14:58.82: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:14:58.82: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.90: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:14:58.97: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:58.97: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:58.97: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 24 09:14:59.20: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:14:59.20: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.27: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 24 09:14:59.27: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.27: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xfc
May 24 09:14:59.35: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.35: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 24 09:14:59.35: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:59.35: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:14:59.43: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:14:59.51: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:14:59.58: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xc0
May 24 09:14:59.65: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.65: [ 1218]: HDLC frame with bad address field 0xf8
May 24 09:14:59.65: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.73: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:59.81: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.81: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.89: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.89: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.89: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:14:59.97: [ 1218]: HDLC frame too short (1 bytes)
May 24 09:14:59.97: [ 1218]: Bad HDLC terminating flag received.
May 24 09:14:59.97: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:00.04: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:15:00.28: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:00.36: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:15:00.45: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:15:00.45: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:00.51: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:15:00.58: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0x80
May 24 09:15:00.73: [ 1218]: HDLC frame with bad address field 0xc0
May 24 09:15:00.73: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:00.80: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:00.88: [ 1218]: HDLC frame with bad address field 0x9e
May 24 09:15:00.88: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0
May 24 09:15:00.96: [ 1218]: HDLC frame not byte-oriented. Trailing byte: 0xf8
May 24 09:15:01.04: [ 1218]: Bad HDLC terminating flag received.
May 24 09:15:01.18: [ 1218]: RECV assumed RCP frame with block end
May 24 09:15:01.18: [ 1218]: --> [10:NO CARRIER]
May 24 09:15:01.18: [ 1218]: <-- [9:AT+FRH=3\r]
May 24 09:15:07.89: [ 1218]: --> [7:CONNECT]
May 24 09:15:08.96: [ 1218]: --> [2:OK]
May 24 09:15:08.96: [ 1218]: RECV recv PPS (partial page signal)
May 24 09:15:08.96: [ 1218]: RECV recv EOP (no more pages or documents)
May 24 09:15:08.96: [ 1218]: RECV received 100 frames of block 1 of page 1
May 24 09:15:08.96: [ 1218]: <-- [9:AT+FRS=7\r]
May 24 09:15:10.32: [ 1218]: --> [2:OK]
May 24 09:15:10.32: [ 1218]: <-- [9:AT+FTH=3\r]
May 24 09:15:10.36: [ 1218]: --> [7:CONNECT]
May 24 09:15:12.64: [ 1218]: --> [2:OK]
May 24 09:15:12.64: [ 1218]: RECV send PPR (partial page request)
May 24 09:15:12.64: [ 1218]: <-- [11:AT+FRM=146\r]
May 24 09:15:19.64: [ 1218]: RECV keeping unconfirmed page
May 24 09:15:19.71: [ 1218]: RECV: 25600 bytes of data, 340 total lines
May 24 09:15:19.82: [ 1218]: --> [2:OK]
May 24 09:15:19.82: [ 1218]: <-- [9:AT+FRS=7\r]
May 24 09:15:19.93: [ 1218]: --> [2:OK]
May 24 09:15:19.95: [ 1218]: RECV FAX: Failed to properly detect high-speed data carrier.
May 24 09:15:19.95: [ 1218]: <-- [9:AT+FTH=3\r]
May 24 09:15:19.95: [ 1218]: RECV FAX (000001501): from , page 1 in 0:29, INF, 3.85 line/mm, 1-D MH, 14400 bit/s
May 24 09:15:19.95: [ 1218]: RECV FAX (000001501): recvq/fax000001374.tif from , route to <unspecified>, 1 pages in 0:38
May 24 09:15:19.99: [ 1218]: --> [7:CONNECT]
May 24 09:15:21.29: [ 1218]: --> [2:OK]
May 24 09:15:21.29: [ 1218]: RECV FAX (000001501): session with terminated abnormally: Failed to properly detect high-speed data carrier.
May 24 09:15:21.29: [ 1218]: RECV FAX: bin/faxrcvd "recvq/fax000001374.tif" "ttyS0" "000001501" "Failed to properly detect high-speed data carrier." "" ""
May 24 09:15:21.29: [ 1218]: RECV FAX: end
May 24 09:15:21.29: [ 1218]: SESSION END
<<<<<<

Any idea? 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

Project hosted by iFAX Solutions