![]() |
Hi Ferenc Short answer: yes Longer answer: Hylafax can be set up so that it archives the Postscript documents shortly after sending them (or after giving up), along with all protocol files about the specific transmission. -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001242 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001243 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001244 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001246 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001250 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001253 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001258 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001260 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001261 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001262 -rw-r--r-- 1 uucp uucp 1227 May 9 13:30 c000001263 -rw-r--r-- 1 uucp uucp 1345 May 9 13:30 c000001264 -rw-r----- 1 uucp uucp 170578 May 9 13:30 doc1129.ps -rw-rw---- 1 uucp 60002 824 May 9 13:06 q1129 This is the directory of one specific job, which had several dialling attempts which you can see according to the amount of c0000* files. One of these files might contain May 09 13:06:57.01: [ 2366]: --> [10:NO CARRIER] May 09 13:06:57.01: [ 2366]: SEND FAILED: JOB 1129 DEST 0434337505 ERR No carrier detected May 09 13:06:57.01: [ 2366]: SEND FAILED: JOB 1129 DEST 0434337505 ERR No carrier detected; too many attempts to dial May 09 13:06:57.01: [ 2366]: <-- [5:ATH0\r] May 09 13:06:57.14: [ 2366]: --> [2:OK] May 09 13:06:57.14: [ 2366]: SESSION END Finally the q-file will contain information like these: tts:1115636817 killtime:1115643833 retrytime:0 state:8 npages:0 totpages:2 ntries:0 ndials:12 totdials:12 maxdials:12 tottries:0 maxtries:3 pagewidth:209 resolution:196 pagelength:296 priority:127 (...) In addition, there is an xferfaxlog file which lists all jobs along with the number and the success or fail status. The only thing hylafax doesn't provide is an efficient tool for dealing with this data. I had to write a script which reads a very precise part of the postscript file (the topic of the fax) and intermixes it with the xferfaxlog file so that I can easily query if a customer is calling. I just have to grep my modified xferfaxlog for their order number and I have the full history of attempts, followed by the effective send. And if I need to see what they should have received, I can open up the postscript file. Greetings, Erich -----Original Message----- From: Medgyessy, Ferenc (Budapest) [mailto:Ferenc.Medgyessy@xxxxxxx] Sent: Monday, May 09, 2005 12:46 PM To: hylafax-users@xxxxxxxxxxx Subject: [hylafax-users] Can Hylafax archive old fax messages sent? Hi, Before we install Hylafax I ask you to inform me about an important utility of this fax program. Our point of view to find a "clever" sw, which can save all fax messages sent with acknowledgement report. (It is important to demonstrate that our company sent this and this fax in past, when a customer questions about.) Can Hylafax do it? Best regards, Ferenc The information in this email and any attachments is confidential and intended solely for the use of the individual(s) to whom it is addressed or otherwise directed. If you are not a named addressee or otherwise an intended recipient, you are requested to immediately notify the sender and to delete the email and all attachments from your system. Visit http://www.sgs.com ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*