Re: [hylafax-users] No answer from remote

["Franck ABELLI" <f.abelli@xxxxxxxxxxxxxxxxxx>]

the number is correct,
i tried to call using cu and it worked.

----- Original Message ----- 
From: "Giulio Orsero" <giulioo@xxxxxxxxx>
To: <hylafax-users@xxxxxxxxxxx>
Sent: Thursday, April 21, 2005 5:07 PM
Subject: Re: [hylafax-users] No answer from remote


On 4/21/05, Franck ABELLI <f.abelli@xxxxxxxxxxxxxxxxxx> wrote:

> avr 21 13:59:28.02: [22217]: <-- [10:AT+FTBC=0\r]
> avr 21 13:59:28.12: [22217]: --> [5:ERROR]
> avr 21 13:59:28.12: [22217]: MODEM Command error
> avr 21 13:59:28.12: [22217]: <-- [11:AT+FBOR=0 \r]
> avr 21 13:59:28.22: [22217]: --> [2:OK]
> avr 21 13:59:28.22: [22217]: <-- [13:AT+FPHCTO=30\r]
> avr 21 13:59:28.32: [22217]: --> [5:ERROR]

Clearly the config file you are using is not optimal for your faxboard.

> avr 21 13:59:28.62: [22217]: DIAL 11016900041918215076
> avr 21 13:59:28.62: [22217]: <-- [25:ATDT11016900041918215076\r]
> avr 21 13:59:32.50: [22217]: --> [9:NO ANSWER]

Have you tried conneting to that number directly using minicom or cu?
If you don't do it you won't know if this is an hylaFAX problem or not.

Are you sure a 20 digit number, not starting with 0 (I think you use 0
for intl calls, right?), is a good number?

-- 
giulioo@xxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*