HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Direct Inward Dialing (DID) with EICON cards



Yes, we use a point to point port from the pbx.

You must create a file /var/spool/hylafax/etc/users, which looks like this:

peter.test@xxxxxxx   601
david.test@xxxxxxx   602
.....


Stefan-Michael. Guenther (in-put GbR) wrote:


Hello Kib,



we are using one Eicon Diva 4Bri with the following config.ttyds01 file:

CountryCode:            49
AreaCode:               241
FAXNumber:              +49



and you then use the device ttyds01 in FaxDispatch to route the fax?
Can you use more than one number on the device ttyds01 and still route the fax according to the number that has been dialed?


Stefan



____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions