HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
Re: [hylafax-users] Error: T.30 T2 timeout, expected signal not received
You need to send us the session logs. /var/spool/hylafax/log/c000000474
Lee.
On Mon, 11 Apr 2005, Claus-Peter Klas wrote:
> Hello,
>
> i run hylafax successfully since a couple of years, but after an upgrade i have real trouble. I sometimes get
> fax and sometimes get stumbled fax. See the very highlevel log below (error run, successfull run) from this morning.
> I use the same modem as the last years, where i had no trouble sending and receiving fax. Please take a look:
>
>
> Error run:
> Apr 11 07:59:08 localhost FaxGetty[32253]: STATE CHANGE: RUNNING -> LISTENING
> Apr 11 07:59:08 localhost FaxQueuer[32237]: MODEM ttyS0: BUSY
> Apr 11 07:59:20 localhost FaxGetty[32253]: STATE CHANGE: LISTENING -> ANSWERING
> Apr 11 07:59:20 localhost FaxQueuer[32237]: MODEM ttyS0: COMID 000000474
> Apr 11 07:59:25 localhost FaxGetty[32253]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
> Apr 11 07:59:56 localhost FaxGetty[22529]: RECV FAX (000000474): from +49 911 32606888, page 1 in 0:22, INF, 7.7 line/mm, 2-D MMR, 14400 bit/s
> Apr 11 07:59:56 localhost FaxGetty[22530]: RECV FAX (000000474): recvq/fax000000438.tif from +49 911 32606888, route to <unspecified>, 1 pages in 0:30
> Apr 11 07:59:57 localhost FaxGetty[32253]: RECV FAX (000000474): session with +49 911 32606888 terminated abnormally: T.30 T2 timeout, expected signal not received
> Apr 11 07:59:57 localhost FaxGetty[32253]: RECV FAX: bin/faxrcvd "recvq/fax000000438.tif" "ttyS0" "000000474" "T.30 T2 timeout, expected signal not received" "" ""
> Apr 11 07:59:57 localhost FaxQueuer[32237]: MODEM ttyS0: COMID
> Apr 11 08:00:10 localhost FaxGetty[32253]: MODEM USR U.S. Robotics Sportster MessagePlus 56000 Rev. 11.1.18/Configuration Profile... Product type Germany External Options V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options Speaker Phone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 8/27/97 FLASH rev 11.1.18 DSP date 5/7/97 DSP rev 10.3.79
> Apr 11 08:00:10 localhost FaxGetty[32253]: STATE CHANGE: RECEIVING -> RUNNING (timeout 30)
> Apr 11 08:00:10 localhost FaxQueuer[32237]: MODEM ttyS0: READY, capabilities Pcaf9c77f:ff
>
>
> Successfull run:
>
> Apr 11 08:27:54 localhost FaxGetty[32253]: STATE CHANGE: RUNNING -> LISTENING
> Apr 11 08:27:54 localhost FaxQueuer[32237]: MODEM ttyS0: BUSY
> Apr 11 08:28:06 localhost FaxGetty[32253]: STATE CHANGE: LISTENING -> ANSWERING
> Apr 11 08:28:06 localhost FaxQueuer[32237]: MODEM ttyS0: COMID 000000475
> Apr 11 08:28:11 localhost FaxGetty[32253]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
> Apr 11 08:29:04 localhost FaxGetty[23344]: RECV FAX (000000475): from +4132 366 73 71, page 1 in 0:27, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
> Apr 11 08:29:04 localhost FaxGetty[23345]: RECV FAX (000000475): recvq/fax000000439.tif from +4132 366 73 71, route to <unspecified>, 1 pages in 0:53
> Apr 11 08:29:05 localhost FaxGetty[32253]: RECV FAX: bin/faxrcvd "recvq/fax000000439.tif" "ttyS0" "000000475" "" "" ""
> Apr 11 08:29:05 localhost FaxQueuer[32237]: MODEM ttyS0: COMID
> Apr 11 08:29:17 localhost FaxGetty[32253]: MODEM USR U.S. Robotics Sportster MessagePlus 56000 Rev. 11.1.18/Configuration Profile... Product type Germany External Options V32bis,V.34+,x2 Fax Options Class 1/Class 2.0 Voice Options Speaker Phone, TAD Clock Freq 92.0Mhz EPROM 256k RAM 32k FLASH date 8/27/97 FLASH rev 11.1.18 DSP date 5/7/97 DSP rev 10.3.79
> Apr 11 08:29:18 localhost FaxGetty[32253]: STATE CHANGE: RECEIVING -> RUNNING (timeout 30)
> Apr 11 08:29:18 localhost FaxQueuer[32237]: MODEM ttyS0: READY, capabilities Pcaf9c77f:ff
>
> Regards,
> Claus-Peter Klas
>
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*