Re: [hylafax-users] modem appears wedged a lot in 4.2.1 than in 4 .1.8

["Shi, Josh (Unix Admin - PCS)" <JShi@xxxxxxxxxxxxxxxxxxxxxxxx>]

That's great. Where are they located ?

Thanks,

Josh

P.S. 

I run 2 hylafax(4.2.1) servers
One with two U.S.Robotics USR5660A modems
the other with Hayes Accura V.92 PCI modems
Both use driver from Linant hsfmodem-6.03.00lnxt04011900full_k2.4.20_8-1rh
(note: newer driver like 7.xx causes system hangs all the time. With 6.03, a
system hangs from time to time)
I notice that failed fax rate is higher with U.S.Robotics modem than Hayes.





-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx]
Sent: Thursday, March 24, 2005 5:43 PM
To: Shi, Josh (Unix Admin - PCS)
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] modem appears wedged a lot in 4.2.1 than in
4.1.8


A log (session or server) of the wedging would help us help you.

Lee.


Shi, Josh (Unix Admin - PCS) wrote:

>I just installed HylaFax 4.2.1 on PC which used to run 4.1.8
>Modems are USR5660A.  The modems got wedged a lot today. 
>So far, I have rebooted twice because of it.
>?
>
>Thanks,
>
>Josh
>
>-----Original Message-----
>From: The HylaFAX Receive Agent [mailto:fax@xxxxxxxxxxxxxxxxxxx]
>Sent: Thursday, March 24, 2005 4:14 PM
>To: FaxMaster@xxxxxxxxxxxxxxxxxxx
>Subject: modem on /dev/ttySHSF0 appears wedged
>
>
>The HylaFAX software thinks that there is a problem with the modem
>on device /dev/ttySHSF0 that needs attention; repeated attempts to
>initialize the modem have failed.
>
>Consult the server trace logs for more information on what is happening.
>
>You will be notified again after 5 minutes if the problem persists.
>
>____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
>
>  
>

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*