HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Only sending 1 page out of 3?



Greetings,

I am having problems sending faxes composed of more than 1 page. HylaFAX
correctly sends the first page, but then returns and doesn't send the rest.
I have no clue what is causing that, therefore I'll show you the log:

---------------

SPECS: Fedora Core 3, HylaFAX v4.1.8, Medi@com Hermes v90 WEB modem


SESSION BEGIN 000000009 9721588
HylaFAX (tm) Version 4.1.8
SEND FAX: JOB 2 DEST ********** COMMID 000000009 DEVICE '/dev/ttyS0'
DELAY 75 ms
DELAY 2600 ms
DELAY 10 ms
<-- [4:ATZ\r]
--> [2:OK]
DELAY 3000 ms
<-- [5:ATE0\r]
--> [4:ATE0]
--> [2:OK]
<-- [5:ATV1\r]
--> [2:OK]
<-- [5:ATQ0\r]
--> [2:OK]
<-- [7:ATS0=0\r]
--> [2:OK]
<-- [7:ATS8=2\r]
--> [2:OK]
<-- [8:ATS7=60\r]
--> [2:OK]
<-- [6:AT&K3\r]
--> [2:OK]
<-- [6:AT&D2\r]
--> [2:OK]
<-- [6:AT&C1\r]
--> [2:OK]
<-- [12:AT+FCLASS=1\r]
--> [2:OK]
<-- [5:ATM0\r]
--> [2:OK]
<-- [12:AT+FCLASS=1\r]
--> [2:OK]
DIAL **********
<-- [15:ATDT**********\r]
--> [7:CONNECT]
--> [2:OK]
DELAY 200 ms
<-- [9:AT+FRH=3\r]
--> [7:CONNECT]
--> [2:OK]
REMOTE NSF "50 80 00 36 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
11"
NSF remote fax equipment: unknown
<-- [9:AT+FRH=3\r]
--> [7:CONNECT]
--> [2:OK]
REMOTE CSI "**********"
<-- [9:AT+FRH=3\r]
--> [7:CONNECT]
--> [2:OK]
REMOTE best rate 9600 bit/s
REMOTE max page width 1728 pixels in 215 mm
REMOTE max unlimited page length
REMOTE best vres 7.7 line/mm
REMOTE best format 2-D MR
REMOTE best 20 ms, 10 ms/scanline
USE 9600 bit/s
USE 20 ms, 10 ms/scanline
SEND file "docq/doc2.ps;41"
USE page width 1728 pixels in 215 mm
USE unlimited page length
USE 7.7 line/mm
USE 2-D MR
SEND training at v.29 9600 bit/s
<-- [9:AT+FTH=3\r]
--> [7:CONNECT]
--> [7:CONNECT]
--> [2:OK]
<-- [9:AT+FTS=7\r]
--> [2:OK]
<-- [10:AT+FTM=96\r]
--> [7:CONNECT]
--> [2:OK]
<-- [9:AT+FRH=3\r]
--> [7:CONNECT]
--> [2:OK]
TRAINING succeeded
DELAY 75 ms
<-- [10:AT+FTM=96\r]
--> [7:CONNECT]
SEND begin page
SENT 27502 bytes of data
SENT 8967 bytes of data
SEND 2D RTC
SEND end page
--> [2:OK]
<-- [9:AT+FTS=7\r]
--> [2:OK]
SEND send MPS (more pages, same document)
<-- [9:AT+FTH=3\r]
--> [7:CONNECT]
--> [2:OK]
<-- [9:AT+FRH=3\r]
--> [7:CONNECT]
--> [2:OK]
SEND recv PIP (procedural interrupt positive)
SEND FAX (000000009): FROM xxxx@yyyy TO ********** (page 1 of 3 sent in
0:40)
<-- [9:AT+FTH=3\r]
--> [7:CONNECT]
--> [2:OK]
<-- [5:ATH0\r]
--> [10:NO CARRIER]
MODEM No carrier
SESSION END

---------------

Any kind of help would be greatly appreciated, thanks in advance!!


C.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions