Re: [hylafax-users] MT5634ZBX on Hylafax

[Sam Przyswa <samp@xxxxxxxxxxxxxxxxx>]

X-Arial Concept-MailScanner: Found to be clean
X-MailScanner-From: samp@xxxxxxxxxxxxxxxxx

Hi,

First I downgraded to my last working Hylafax setup 4.1.2 with a basic 
USR, change my modem to a MT5634ZBA-V92/1.32b, then I configured my 
config.ttyS0 as:

---------------------------------------------------------------------
ModemType:              Class2          # use class 2 interface
ModemRate:              19200           # lock rate for DCE-DTE 
communication
ModemFlowControl:       rtscts          # default
Class2Cmd:              AT+FCLASS=2     # command to enter class 2
#
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
#
# NB: some models get confused by @ in ModemDialCmd
#
ModemDialCmd:           ATDT%s          # T for tone dialing
#
---------------------------------------------------------------------

With this very minimalist config when a data call coming I got this with 
mgetty, after the "GETTY: exit status 05000" the modem hangup, there is 
the log:

---------------------------------------------------------------------
Mar 21 18:46:45 prod1 FaxGetty[1306]: MODEM MULTI-TECH SYSTEMS 
MT5634ZBA-V92/1.32b
Mar 21 18:46:45 prod1 FaxQueuer[521]: MODEM ttyS0: READY, capabilities 
P3fdfe7ff:ff
Mar 21 18:47:04 prod1 FaxQueuer[521]: MODEM ttyS0: BUSY
Mar 21 18:47:04 prod1 FaxQueuer[521]: MODEM ttyS0: COMID 00000184
Mar 21 18:47:08 prod1 FaxGetty[1306]: ANSWER: DATA CONNECTION
Mar 21 18:47:08 prod1 FaxGetty[1306]: GETTY: START 
"/etc/hylafax/getty-link -r -b -s 19200 ttyS0", pid 1364
Mar 21 18:47:22 prod1 FaxGetty[1306]: GETTY: exit status 05000
Mar 21 18:47:22 prod1 FaxQueuer[521]: MODEM ttyS0: COMID
Mar 21 18:47:31 prod1 FaxGetty[1306]: MODEM MULTI-TECH SYSTEMS 
MT5634ZBA-V92/1.32b
---------------------------------------------------------------------

The faxaddmodem don't work with this modem on any Hylafax version, it 
seems that Hylafax doesn't support the MultiTech MT5634ZBA-V92/1.32b

It is the first time I spend one week to configure Hylafax, I think it 
should be better to remove these modem (MT5634ZBA, MT5656ZDX) from the 
Hylafax compatibility list as long as we don't find the right way to 
make it working, the MT5634ZBA-V92 cost me 190.00 Euros !

Samuel De Leon a écrit :

> Sam,
>
> The only commands that you need to set the modem are:
> AT+FCLASS=2
> AT+FAA=1
>
> You can even test this using a basic terminal emulation such as
> HyperTerminal in Windows or minicom in linux.
> This is what the modem suppose to do.
>
>
> OK                    / You set the modem with the right commands
> at+fclass=2           
> OK  
> at+faa=1        
> OK  
> at+fclass?          
> 2 
>
> OK  
>                     / A fax call is coming in , and the modem should answer
> in fax mode
>
> RING    
>
> +FCON     
>
> +FTSI:"        763 717 5721"                            
>
> +FDCS:0,5,0,2,0,0,0,3                     
>
> OK  
>
> +FHNG:72        
>
> OK  
>                   /Another fax call is coming in and the modem should
> answer in fax mode.
> RING    
>
> +FCON     
>
> +FTSI:"        763 717 5721"
>
> +FDCS:0,5,0,2,0,0,0,3
>
> OK
>
> +FHNG:72
>
> OK
>
>               /When a data call is coming the modem should answer in data
> mode.
> RING    
>
>
> DATA    
>
>
> CONNECT 33600 V42bis                    
>
> OK  
>
> After the modem answers in data modem .The modem can not switch back to fax
> mode so the software needs to configure the modem one more time with the
> following commands.
>
>
> OK  
> at+fclass=2           
> OK  
> at+faa=1        
> OK  
>
> Be sure that your software configure the modem after each call, this way the
> modem should answer in fax or data modem, depending of the incoming call.
>
> If you test the modem with a terminal. Let me know if the modem fails to
> answer a fax or data call.
>  
Yes it is, at this time I can't succedeed to receive a data call

> If the modem answers correctly in the terminal, then the problem could be a
> configuration in or modem support from you software. 
> www.hylafax.org  will be able to provide a list of supported modems with
> their software.
>  
Does the MT5634ZBA-V92/1.32b is really supported by Hylafax ???

Sam.

--

Sam Przyswa - Chef de projet
Arial Concept - Intégrateur Internet
36, rue de Turin - 75008 - Paris - France
Tel: 01 40 54 86 04 - Fax: 01 40 54 83 01
Web: http://www.arial-concept.com - Email: Info@xxxxxxxxxxxxxxxxx



--
Ce message a été vérifié par MailScanner
pour des virus ou des polluriels et rien de
suspect n'a été trouvé.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*