Re: [hylafax-users] MT5656ZDX on Hylafax

[Samuel De Leon <SDIAZDELEON@xxxxxxxxxxxxx>]

Sam,

The only commands that you need to set the modem are:
AT+FCLASS=2
AT+FAA=1

You can even test this using a basic terminal emulation such as
HyperTerminal in Windows or minicom in linux.
This is what the modem suppose to do.


OK                    / You set the modem with the right commands
at+fclass=2           
OK  
at+faa=1        
OK  
at+fclass?          
2 

OK  
                     / A fax call is coming in , and the modem should answer
in fax mode

RING    

+FCON     

+FTSI:"        763 717 5721"                            

+FDCS:0,5,0,2,0,0,0,3                     

OK  

+FHNG:72        

OK  
                   /Another fax call is coming in and the modem should
answer in fax mode.
RING    

+FCON     

+FTSI:"        763 717 5721"

+FDCS:0,5,0,2,0,0,0,3

OK

+FHNG:72

OK

               /When a data call is coming the modem should answer in data
mode.
RING    


DATA    


CONNECT 33600 V42bis                    

OK  

After the modem answers in data modem .The modem can not switch back to fax
mode so the software needs to configure the modem one more time with the
following commands.


OK  
at+fclass=2           
OK  
at+faa=1        
OK  

Be sure that your software configure the modem after each call, this way the
modem should answer in fax or data modem, depending of the incoming call.

If you test the modem with a terminal. Let me know if the modem fails to
answer a fax or data call.

If the modem answers correctly in the terminal, then the problem could be a
configuration in or modem support from you software. 
www.hylafax.org  will be able to provide a list of supported modems with
their software.


Regards,


Samuel.



-----Original Message-----
From: Sam Przyswa [mailto:samp@xxxxxxxxxxxxxxxxx]
Sent: Friday, March 18, 2005 10:20 AM
To: Samuel De Leon
Cc: Hylafax User list; Loic Kervenec
Subject: Re: MT5656ZDX on Hylafax

Samuel De Leon a écrit :

>Sam,
>
>This modem does not support Class 2.0 fax.
>More likely Hylafax does not support the MT5656ZDX modem or Hylafax is
>reading the properties from the modem wrong.
> 
>
So I changed to a MT5634ZBA-V92 Serial Data/Fax Modem Version 1.32b
about $160 and I have the same problems + I can't make a data call on a
basic USR !?

PLEASE LET ME KNOW THE RIGHT setup for these b****** modems able to
send/receive fax AND data call as all modems I used before.

Sam Przyswa.

--

Sam Przyswa - Chef de projet
Arial Concept - Intégrateur Internet
36, rue de Turin - 75008 - Paris - France
Tel: 01 40 54 86 04 - Fax: 01 40 54 83 01
Web: http://www.arial-concept.com - Email: Info@xxxxxxxxxxxxxxxxx

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*