Re: [hylafax-users] Troubleshooting receive fax problems

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Massimiliano Anziutti wrote:

> sometimes i get
> ....
> Mar 18 19:05:32.62: [19362]: <-- [9:AT+FRH=3\r]
> Mar 18 19:05:35.72: [19362]: --> [0:]
> Mar 18 19:05:35.72: [19362]: MODEM <Empty line>
> Mar 18 19:05:35.72: [19362]: <-- data [1]
> Mar 18 19:05:35.77: [19362]: --> [2:OK]
> Mar 18 19:05:35.77: [19362]: DELAY 1500 ms
> Mar 18 19:05:37.27: [19362]: <-- [9:AT+FTH=3\r]
> Mar 18 19:05:37.35: [19362]: --> [7:CONNECT]
> Mar 18 19:05:37.35: [19362]: <-- data [32]
> Mar 18 19:05:37.35: [19362]: <-- data [2]
> Mar 18 19:05:39.37: [19362]: --> [7:CONNECT]
> Mar 18 19:05:39.37: [19362]: <-- data [23]
> Mar 18 19:05:39.37: [19362]: <-- data [2]
> Mar 18 19:05:40.20: [19362]: --> [7:CONNECT]
> Mar 18 19:05:40.20: [19362]: <-- data [10]
> Mar 18 19:05:40.20: [19362]: <-- data [2]
> Mar 18 19:05:40.75: [19362]: --> [2:OK]
> Mar 18 19:05:40.75: [19362]: <-- [9:AT+FRH=3\r]
> Mar 18 19:05:43.85: [19362]: --> [0:]
> Mar 18 19:05:43.85: [19362]: MODEM <Empty line>
> Mar 18 19:05:43.85: [19362]: <-- data [1]
> Mar 18 19:05:43.90: [19362]: --> [2:OK]
> Mar 18 19:05:43.90: [19362]: RECV FAX: No answer (T.30 T1 timeout)
> Mar 18 19:05:43.90: [19362]: RECV FAX: end
> Mar 18 19:05:43.90: [19362]: SESSION END


I don't know what to make of this log.  Sorry.

> or sometimes:
> Mar 18 19:19:53.76: [19898]: SESSION BEGIN 000000186 390432xxxxxxx
> Mar 18 19:19:53.76: [19898]: HylaFAX (tm) Version 4.2.1
> Mar 18 19:19:53.76: [19898]: <-- [4:ATA\r]
> Mar 18 19:19:59.93: [19898]: --> [7:CONNECT]
> Mar 18 19:19:59.93: [19898]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
> Mar 18 19:19:59.93: [19898]: RECV FAX: begin
> Mar 18 19:19:59.93: [19898]: <-- data [32]
> Mar 18 19:19:59.93: [19898]: <-- data [2]
> Mar 18 19:20:01.85: [19898]: --> [7:CONNECT]
> Mar 18 19:20:01.85: [19898]: <-- data [23]
> Mar 18 19:20:01.85: [19898]: <-- data [2]
> Mar 18 19:20:02.68: [19898]: --> [7:CONNECT]
> Mar 18 19:20:02.68: [19898]: <-- data [10]
> Mar 18 19:20:02.68: [19898]: <-- data [2]
> Mar 18 19:20:03.23: [19898]: --> [2:OK]
> Mar 18 19:20:03.23: [19898]: <-- [9:AT+FRH=3\r]
> Mar 18 19:20:03.76: [19898]: --> [7:CONNECT]
> Mar 18 19:20:05.22: [19898]: --> [2:OK]
> Mar 18 19:20:05.22: [19898]: REMOTE TSI "Fax"
> Mar 18 19:20:05.22: [19898]: <-- [9:AT+FRH=3\r]
> Mar 18 19:20:05.28: [19898]: --> [7:CONNECT]
> Mar 18 19:20:05.47: [19898]: --> [2:OK]
> Mar 18 19:20:05.47: [19898]: REMOTE wants 14400 bit/s
> Mar 18 19:20:05.47: [19898]: REMOTE wants A4 page width (215 mm)
> Mar 18 19:20:05.47: [19898]: REMOTE wants A4 page length (297 mm)
> Mar 18 19:20:05.47: [19898]: REMOTE wants 7.7 line/mm
> Mar 18 19:20:05.47: [19898]: REMOTE wants 1-D MH
> Mar 18 19:20:05.47: [19898]: RECV training at v.17 14400 bit/s
> Mar 18 19:20:05.47: [19898]: <-- [11:AT+FRM=145\r]
> Mar 18 19:20:07.04: [19898]: --> [7:CONNECT]
> Mar 18 19:20:10.04: [19898]: <-- data [1]
> Mar 18 19:20:10.06: [19898]: --> [10:NO CARRIER]
> Mar 18 19:20:10.06: [19898]: MODEM No carrier
> Mar 18 19:20:10.06: [19898]: RECV: TCF 2874 bytes, 2% non-zero, 2699 
> zero-run
> Mar 18 19:20:12.06: [19898]: MODEM <Empty line>
> Mar 18 19:20:14.06: [19898]: MODEM <Empty line>
> Mar 18 19:20:16.06: [19898]: MODEM <Empty line>


As for this problem, I believe that it's been fixed in CVS HEAD.  So if 
you want to try updating that may help things.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*