HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Fax keeps being requeued



Hello!

I´ve set up hylafax on my box and I can send a fax but although it´s
transfered completely, the job is requeued every time.

Some information about the system:

- debian sarge linux
- capi4hylafax using a Fritz!PCI as modem

debian:/etc/hylafax# faxstat -v
Trying localhost (127.0.0.1) at port 4559...
Connected to localhost.
220 debian.wg server (HylaFAX (tm) Version 4.2.1) ready.
-> USER root
230 User root logged in.
-> TZONE LOCAL
200 Using time values in CET.
-> PORT 127,0,0,1,4,11
200 PORT command successful.
-> LIST status
150 Opening new data connection for "status".
HylaFAX scheduler on debian.wg: Running
Modem faxCAPI (+49.xxx.yyyy): Running and idle
226 Transfer complete.
debian:/etc/hylafax#

a transfer´s log:

Your facsimile job to zzz was not sent because:
    <no reason recorded>

The job will be retried at 22:51.

    ---- Transcript of session follows ----

Mar 19 22:43:03.58: [27084]: SESSION BEGIN 00000040 +49.yyy.yyy
Mar 19 22:43:03.59: [27084]: SEND FAX: JOB 40 DEST zzz COMMID 00000169
Mar 19 22:43:03.59: [27084]: Try to connect to fax number zzz in Hylafax mode on controller 1.
Mar 19 22:43:03.59: [27084]: Dial and starting transfer of TIFF-File docq/doc40.ps;01 with fine resolution.
Mar 19 22:43:11.07: [27084]: Connection established.
Mar 19 22:43:11.07: [27084]:    StationID = +49 zzz zzz
Mar 19 22:43:11.07: [27084]:    BaudRate  = 64000
Mar 19 22:43:11.07: [27084]:    Flags     = HighRes, MR_compr, MMR_compr
Mar 19 22:43:46.96: [27084]: Page 1 was sended. - Last Page!
Mar 19 22:43:46.96: [27084]: Fax file completely transfered to CAPI.
Mar 19 22:43:53.41: [27084]: Connection dropped with Reason 0x3400 (No additional information).
Mar 19 22:43:53.42: [27084]: SESSION END

The fax (I sent it to me again) can be opened without any problems and
it really looks good.
Now, why is it requeued, although the system itself says, that it has
been transfered completely?

Thanks for your advice.

Greetings,
Stefan Schilling, Germany



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions