HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] T.30 T1 timeout question



Hello together,

I have a MultiTech for outgoing (ati0 gives "LT V.92 1.0 MT5634ZPX-PCI-U Internal Data/Fax/Voice Modem Version 1.32f") in a RedHat9 box, with hylafax-4.2.1-1rh9 (from rpm).

When sending to one destination, I repeatedly get the error mentioned in the subject line, and the log as shown below (many identical copies except for timestamps).

The "no answer" seems rather inaccurate since it is clear the other side picks up (and I've phoned it with a normal phone to see that it indeed answers with modem-noise).

Does anyone know what this is trying to tell me or how to correct it or work around it?

I also occasionally get "check modem power" (see second log below).

Any help appreciated.

Martin

Mar 17 08:30:13.73: [ 7547]: SESSION BEGIN 000023398 14161234567
Mar 17 08:30:13.73: [ 7547]: HylaFAX (tm) Version 4.2.1
Mar 17 08:30:13.73: [ 7547]: SEND FAX: JOB 24883 DEST 416-123-4567 COMMID 000023398 DEVICE '/dev/ttyS5'
Mar 17 08:30:13.74: [ 7547]: <-- [14:AT+FCLASS=1.0\r]
Mar 17 08:30:13.84: [ 7547]: --> [2:OK]
Mar 17 08:30:13.84: [ 7547]: <-- [14:AT+F34=14,1,2\r]
Mar 17 08:30:13.95: [ 7547]: --> [2:OK]
Mar 17 08:30:13.96: [ 7547]: DIAL 4161234567
Mar 17 08:30:13.96: [ 7547]: <-- [15:ATDT4161234567\r]
Mar 17 08:30:32.98: [ 7547]: --> [8:+F34:6,1]
Mar 17 08:30:32.98: [ 7547]: V.8 handshaking succeeded, V.34-Fax (SuperG3) capability enabled.
Mar 17 08:30:32.98: [ 7547]: Primary channel rate: 14400 bit/s, Control channel rate: 1200 bit/s.
Mar 17 08:30:32.98: [ 7547]: --> [7:CONNECT]
Mar 17 08:30:32.99: [ 7547]: Control channel selected
Mar 17 08:30:32.99: [ 7547]: EOT received (end of transmission)
Mar 17 08:30:32.99: [ 7547]: HDLC frame too short (0 bytes)
Mar 17 08:30:32.99: [ 7547]: HDLC frame too short (0 bytes)
Mar 17 08:31:12.98: [ 7547]: No answer (T.30 T1 timeout)
Mar 17 08:31:12.98: [ 7547]: SEND FAILED: JOB 24883 DEST 416-123-4567 ERR No answer (T.30 T1 timeout)
Mar 17 08:31:12.99: [ 7547]: SEND FAILED: JOB 24883 DEST 416-123-4567 ERR No answer (T.30 T1 timeout); too many attempts to dial
Mar 17 08:32:12.98: [ 7547]: <-- [5:ATH0\r]
Mar 17 08:32:13.34: [ 7547]: --> [2:OK]
Mar 17 08:32:13.34: [ 7547]: SESSION END







Mar 17 01:11:29.70: [ 4739]: SESSION BEGIN 000023371 14161234567
Mar 17 01:11:29.71: [ 4739]: HylaFAX (tm) Version 4.2.1
Mar 17 01:11:29.71: [ 4739]: SEND FAX: JOB 24829 DEST 416-123-4567 COMMID 000023371 DEVICE '/dev/ttyS5'
Mar 17 01:11:29.71: [ 4739]: <-- [14:AT+FCLASS=1.0\r]
Mar 17 01:11:29.82: [ 4739]: --> [2:OK]
Mar 17 01:11:29.82: [ 4739]: <-- [14:AT+F34=14,1,2\r]
Mar 17 01:11:29.93: [ 4739]: --> [2:OK]
Mar 17 01:11:29.93: [ 4739]: DIAL 4161234567
Mar 17 01:11:29.93: [ 4739]: <-- [15:ATDT4161234567\r]
Mar 17 01:12:20.21: [ 4739]: --> [2:]
Mar 17 01:12:20.22: [ 4739]: SEND FAILED: JOB 24829 DEST 416-123-4567 ERR Unknown problem (check modem power)
Mar 17 01:12:20.22: [ 4739]: SEND FAILED: JOB 24829 DEST 416-123-4567 ERR Unknown problem (check modem power); too many attempts to dial
Mar 17 01:12:20.22: [ 4739]: <-- [5:ATH0\r]
Mar 17 01:12:20.22: [ 4739]: --> [2:OK]
Mar 17 01:12:20.22: [ 4739]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions