Re: [hylafax-users] Intel 536EP HylaFAX 4.2.1 Failed to properly detect high-speed data carrier

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Martijn Kint wrote:

> Mar 09 13:32:26.41: [26174]: MODEM input buffering enabled
> Mar 09 13:32:26.41: [26174]: MODEM set XON/XOFF/FLUSH: input ignored, output generated
> Mar 09 13:32:26.41: [26174]: <-- [11:AT+FRM=146\r]
> Mar 09 13:32:33.41: [26174]: MODEM TIMEOUT: reading line from modem
> Mar 09 13:32:33.41: [26174]: <-- data [1]
> Mar 09 13:32:33.54: [26174]: --> [2:OK]
>  

This is the error.  It's quite clear that the high-speed data carrier 
was not detected by the modem.

That said, I strongly suspect that this is an error on the part of the 
modem itself.  Either it doesn't implement +FCERROR as it is supposed 
to, or some other problem.  I have a few 536EP modems myself, and I've 
not yet been able to successfully use them.  I haven't put much effort 
into it, though.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*