Re: [hylafax-users] RECV/CQ: Bad 1D pixel count ...

[Diego Chaparro <dchaparro@xxxxxxxxxxxx>]

On Thu, 2005-03-10 at 07:47 -0800, Lee Howard wrote:
> Diego Chaparro wrote:
>
> >And here are the session logs of each one, sender and receiver:
> [...]
> >Mar 10 12:29:01.93: [ 4936]: RECV training at v.17 14400 bit/s
> >Mar 10 12:29:01.93: [ 4936]: MODEM set XON/XOFF/DRAIN: input ignored,
> >  
> Why isn't ECM being used?

	I don't have any idea :-(

> Is it disabled in the sender's config?

	No. This is the sender and the receiver configuration:

#
CountryCode:            34
AreaCode:               91
FAXNumber:              XXXXXXX
LongDistancePrefix:     1
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          0xFFFFF
SessionTracing:         0xFFFFF
RecvFileMode:           0640
LogFileMode:            0640
DeviceMode:             0660
RingsBeforeAnswer:      3
SpeakerVolume:          off
GettyArgs:              "-r -b %l"
LocalIdentifier:        "NothingSetup"
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
PercentGoodLines:       90
MaxRecvPages:           25
#

ModemType:              Class1          # use this to supply a hint

# as of v1.20, +FTS is not supported, which will cause "Stop and wait"
# failures unless we use software pauses instead...

Class1PPMWaitCmd:       "<delay\0727>"  # \072 == :  to avoid awk
problem
Class1TCFWaitCmd:       "<delay\0727>"
Class1EOPWaitCmd:       "<delay\0729>"
Class1SwitchingCmd:     "<delay\0727>"  # assumption: +FRS not supported

Class1ECMSupport:       yes

> Are you sending with 'sendfax -E' ?

	No. I'm using:

	sendfax -n aips94.ps -d 913570002

> >PD: I've tried to connect directly from the server to the receiver with
> >a cable, and use faxanswer but i haven't been able to make it work. The
> >receiver never answers. Any idea? 
> >
> Show us the session log of the receiver after you 'faxanswer'.

Here it is:

Mar 10 10:49:04.36: [ 4788]: SESSION BEGIN 000000042 34916330001
Mar 10 10:49:04.36: [ 4788]: HylaFAX (tm) Version 4.2.1
Mar 10 10:49:04.36: [ 4788]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Mar 10 10:49:04.36: [ 4788]: <-- [4:ATA\r]
Mar 10 10:49:14.21: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:14.21: [ 4788]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Mar 10 10:49:14.21: [ 4788]: STATE CHANGE: ANSWERING -> RECEIVING
Mar 10 10:49:14.21: [ 4788]: MODEM input buffering enabled
Mar 10 10:49:14.21: [ 4788]: RECV FAX: begin
Mar 10 10:49:14.21: [ 4788]: MODEM input buffering disabled
Mar 10 10:49:14.21: [ 4788]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6
94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Mar 10 10:49:14.21: [ 4788]: <-- data [32]
Mar 10 10:49:14.21: [ 4788]: <-- data [2]
Mar 10 10:49:14.25: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:14.25: [ 4788]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76
96 16 2E F6 72 04 04
04 04 04 04 04 04>
Mar 10 10:49:14.25: [ 4788]: <-- data [23]
Mar 10 10:49:14.25: [ 4788]: <-- data [2]
Mar 10 10:49:14.28: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:14.28: [ 4788]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Mar 10 10:49:14.28: [ 4788]: <-- data [10]
Mar 10 10:49:14.28: [ 4788]: <-- data [2]
Mar 10 10:49:17.34: [ 4788]: --> [2:OK]
Mar 10 10:49:17.34: [ 4788]: <-- [9:AT+FRH=3\r]
Mar 10 10:49:20.44: [ 4788]: --> [0:]
Mar 10 10:49:20.44: [ 4788]: MODEM <Empty line>
Mar 10 10:49:20.44: [ 4788]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 10 10:49:20.44: [ 4788]: <-- data [1]
Mar 10 10:49:20.64: [ 4788]: MODEM TIMEOUT: reading line from modem
Mar 10 10:49:20.64: [ 4788]: MODEM <Timeout>
Mar 10 10:49:20.64: [ 4788]: DELAY 1500 ms
Mar 10 10:49:22.14: [ 4788]: <-- [9:AT+FTH=3\r]
Mar 10 10:49:22.19: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:22.19: [ 4788]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6
94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Mar 10 10:49:22.19: [ 4788]: <-- data [32]
Mar 10 10:49:22.19: [ 4788]: <-- data [2]
Mar 10 10:49:22.22: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:22.22: [ 4788]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76
96 16 2E F6 72 04 04
04 04 04 04 04 04>
Mar 10 10:49:22.22: [ 4788]: <-- data [23]
Mar 10 10:49:22.22: [ 4788]: <-- data [2]
Mar 10 10:49:22.25: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:22.25: [ 4788]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Mar 10 10:49:22.25: [ 4788]: <-- data [10]
Mar 10 10:49:22.25: [ 4788]: <-- data [2]
Mar 10 10:49:25.45: [ 4788]: --> [2:OK]
Mar 10 10:49:25.45: [ 4788]: <-- [9:AT+FRH=3\r]
Mar 10 10:49:28.55: [ 4788]: --> [0:]
Mar 10 10:49:28.55: [ 4788]: MODEM <Empty line>
Mar 10 10:49:28.55: [ 4788]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 10 10:49:28.55: [ 4788]: <-- data [1]
Mar 10 10:49:28.75: [ 4788]: MODEM TIMEOUT: reading line from modem
Mar 10 10:49:28.75: [ 4788]: MODEM <Timeout>
Mar 10 10:49:28.75: [ 4788]: DELAY 1500 ms
Mar 10 10:49:30.25: [ 4788]: <-- [9:AT+FTH=3\r]
Mar 10 10:49:30.30: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:30.30: [ 4788]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6
94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Mar 10 10:49:30.30: [ 4788]: <-- data [32]
Mar 10 10:49:30.30: [ 4788]: <-- data [2]
Mar 10 10:49:30.33: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:30.33: [ 4788]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76
96 16 2E F6 72 04 04
04 04 04 04 04 04>
Mar 10 10:49:30.33: [ 4788]: <-- data [23]
Mar 10 10:49:30.33: [ 4788]: <-- data [2]
Mar 10 10:49:30.36: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:30.36: [ 4788]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Mar 10 10:49:30.36: [ 4788]: <-- data [10]
Mar 10 10:49:30.36: [ 4788]: <-- data [2]
Mar 10 10:49:33.56: [ 4788]: --> [2:OK]
Mar 10 10:49:33.56: [ 4788]: <-- [9:AT+FRH=3\r]
Mar 10 10:49:36.66: [ 4788]: --> [0:]
Mar 10 10:49:36.66: [ 4788]: MODEM <Empty line>
Mar 10 10:49:36.66: [ 4788]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 10 10:49:36.66: [ 4788]: <-- data [1]
Mar 10 10:49:36.86: [ 4788]: MODEM TIMEOUT: reading line from modem
Mar 10 10:49:36.86: [ 4788]: MODEM <Timeout>
Mar 10 10:49:36.86: [ 4788]: DELAY 1500 ms
Mar 10 10:49:38.36: [ 4788]: <-- [9:AT+FTH=3\r]
Mar 10 10:49:38.41: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:38.41: [ 4788]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6
94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Mar 10 10:49:38.41: [ 4788]: <-- data [32]
Mar 10 10:49:38.41: [ 4788]: <-- data [2]
Mar 10 10:49:38.44: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:38.44: [ 4788]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76
96 16 2E F6 72 04 04
04 04 04 04 04 04>
Mar 10 10:49:38.44: [ 4788]: <-- data [23]
Mar 10 10:49:38.44: [ 4788]: <-- data [2]
Mar 10 10:49:38.47: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:38.47: [ 4788]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Mar 10 10:49:38.47: [ 4788]: <-- data [10]
Mar 10 10:49:38.47: [ 4788]: <-- data [2]
Mar 10 10:49:41.67: [ 4788]: --> [2:OK]
Mar 10 10:49:41.67: [ 4788]: <-- [9:AT+FRH=3\r]
Mar 10 10:49:44.77: [ 4788]: --> [0:]
Mar 10 10:49:44.77: [ 4788]: MODEM <Empty line>
Mar 10 10:49:44.77: [ 4788]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 10 10:49:44.77: [ 4788]: <-- data [1]
Mar 10 10:49:44.97: [ 4788]: MODEM TIMEOUT: reading line from modem
Mar 10 10:49:44.97: [ 4788]: MODEM <Timeout>
Mar 10 10:49:44.97: [ 4788]: DELAY 1500 ms
Mar 10 10:49:46.47: [ 4788]: <-- [9:AT+FTH=3\r]
Mar 10 10:49:46.52: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:46.52: [ 4788]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86
62 82 1A 04 14 2E B6
94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 8C>
Mar 10 10:49:46.52: [ 4788]: <-- data [32]
Mar 10 10:49:46.52: [ 4788]: <-- data [2]
Mar 10 10:49:46.55: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:46.55: [ 4788]: <-- HDLC<23:FF C0 02 0E AE 2E A6 CA E6 76
96 16 2E F6 72 04 04
04 04 04 04 04 04>
Mar 10 10:49:46.55: [ 4788]: <-- data [23]
Mar 10 10:49:46.55: [ 4788]: <-- data [2]
Mar 10 10:49:46.58: [ 4788]: --> [7:CONNECT]
Mar 10 10:49:46.58: [ 4788]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Mar 10 10:49:46.58: [ 4788]: <-- data [10]
Mar 10 10:49:46.58: [ 4788]: <-- data [2]
Mar 10 10:49:49.78: [ 4788]: --> [2:OK]
Mar 10 10:49:49.78: [ 4788]: <-- [9:AT+FRH=3\r]
Mar 10 10:49:52.88: [ 4788]: --> [0:]
Mar 10 10:49:52.88: [ 4788]: MODEM <Empty line>
Mar 10 10:49:52.88: [ 4788]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 10 10:49:52.88: [ 4788]: <-- data [1]
Mar 10 10:49:53.08: [ 4788]: MODEM TIMEOUT: reading line from modem
Mar 10 10:49:53.08: [ 4788]: MODEM <Timeout>
Mar 10 10:49:53.08: [ 4788]: RECV FAX: No answer (T.30 T1 timeout)
Mar 10 10:49:53.08: [ 4788]: RECV FAX: end
Mar 10 10:49:53.08: [ 4788]: SESSION END

Regards.

-- 
Diego Chaparro
Grupo de Sistemas y Comunicaciones
Universidad Rey Juan Carlos
C/ Tulipan s/n - 28933 Mostoles
dchaparro@xxxxxxxxxxxxxxxxxx  ||  dchaparro@xxxxxxx


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*