HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] TimeOut T.30 T2



On 2005.01.28 14:56 Hans Strickler wrote:
We have recently turned changed :
MaxConsecutiveBadLines:0 and PercentGoodLines: 0
, because about 10~15% of faxes were failing with
"T.30 T2 Time out" errors as well as "Unspecified Phase C error, including too much..."(s). Phase C appears to have disappeared (we need to use a different Photo-Viewer to view the Tiff's). However, the T.30's seem to have grown.


INFO:
Hylafax Version 4.1.8
Suse 9.1
Libfiff (not sure which version)
Modems (2)- separate lines Both 3-Com/USR FAX Modems using Class1 (not sure which exact model we have)
Open to suggestions for better modem(s) to use

Well, first of all you would help yourself a little bit by upgrading to 4.2.1. The added ECM support will give a little bit more reliable results. However, the real problem here is your modems. You can expect a fair amount of problems with USR modems. The logs you provided were typical of the kind of stuff that USRs do.


Replacement modem recommendations would be to get MultiTech MT5634ZBA-V92 or MT5634ZPX-PCI-V92 modems.

Error Log and Modem Config (both configs are essentially identical) attached.

Curious, the 1st line of the session log has our area-code twice, THEN the phone#. Mean anything?

You probably have a misconfiguration somewhere in your config files.


Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions