![]() |
Hi, Which PCI modem has the best performance among all? I want to minimize fax error to around 1%. Thank you. Thomas ----- Original Message ----- From: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx> To: "support" <support@xxxxxxxxxxxx> Cc: <hylafax-users@xxxxxxxxxxx> Sent: Friday, December 03, 2004 4:17 PM Subject: Re: [hylafax-users] Fax Machine incompatible with Hylafax > On 2004.12.02 23:49 support wrote: > > Hi, > > > > > > I encounter a problem when I send fax to some fax machines. Some fax > > machines will always give a busy signal to hylafax. Fax cannot be sent > > to them. However, if I use a typical fax machine to send fax to these > > fax machine, it will be successful. > > > > > > Some Old Fax Machine cannot communicate with Hylafax. Am I correct? > > The BUSY response comes from the modem itself, not from HylaFAX. So > the answer depends on if you blame HylaFAX for modem issues or not. > > If you are sending to a destination that will not result in a "CONNECT" > or "+FCON" response with the modem then you could try a different modem. > > Lee. > > ____________________ HylaFAX(tm) Users Mailing List _______________________ > To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null > *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* > > > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*