HylaFAX The world's most advanced open source fax server |
Class 1 or 2? --- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote: > Originally I had it set to xonxoff (by default) but > I changed it to > rtscts trying to trouble shoot and I get the same > results. I am not > entirely versed on what my options are when dealing > with flow > control...as a hint I am using a Zoom 1144L external > serial modem, if > that is worth anything. > > Pedro Rocadas wrote: > > >Which flow control is set in the config file? > > > >--- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote: > > > > > > > >>I am using libtiff-3.5.7 > >> > >>Thanks > >> > >>Pedro Rocadas wrote: > >> > >> > >> > >>>Which libtiff are you using? > >>> > >>>--- Jason Self <jself@xxxxxxxxxxxxxxxxxxx> wrote: > >>> > >>> > >>> > >>> > >>> > >>>>I have been frequently getting faxes that do not > >>>>have all of their > >>>>pages, I have been fighting with this for a > while > >>>>and think I have > >>>>finnaly established what the problem may be. > The > >>>>attached is a log for > >>>>a 19 page fax and only 2 pages were recieved. I > >>>>also get faxes that can > >>>>not be read on occasion but I am more concerned > >>>> > >>>> > >>with > >> > >> > >>>>this. I have > >>>>noticed in my /var/log/messages that it does > >>>> > >>>> > >>recieve > >> > >> > >>>>all pages and I > >>>>have pasted that log as well. It looks like > they > >>>>are being recieved but > >>>>not saved correctly, however the next fax has 8 > >>>>pages and comes through > >>>>perfectly. I am at a loss on ideas. > >>>> > >>>>Here is the log from the fax: > >>>> > >>>>Nov 05 08:13:48.63: [27436]: SESSION BEGIN > >>>> > >>>> > >>000000118 > >> > >> > >>>>15137927922 > >>>>Nov 05 08:13:48.63: [27436]: HylaFAX (tm) > Version > >>>>4.2.0 > >>>>Nov 05 08:13:48.63: [27436]: <-- [4:ATA\r] > >>>>Nov 05 08:13:54.99: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:13:54.99: [27436]: ANSWER: FAX > >>>> > >>>> > >>CONNECTION > >> > >> > >>>>DEVICE '/dev/ttyS0' > >>>>Nov 05 08:13:54.99: [27436]: RECV FAX: begin > >>>>Nov 05 08:13:55.00: [27436]: <-- data [32] > >>>>Nov 05 08:13:55.00: [27436]: <-- data [2] > >>>>Nov 05 08:13:55.03: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:13:55.03: [27436]: <-- data [23] > >>>>Nov 05 08:13:55.03: [27436]: <-- data [2] > >>>>Nov 05 08:13:55.05: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:13:55.05: [27436]: <-- data [10] > >>>>Nov 05 08:13:55.05: [27436]: <-- data [2] > >>>>Nov 05 08:13:57.19: [27436]: --> [2:OK] > >>>>Nov 05 08:13:57.19: [27436]: <-- [9:AT+FRH=3\r] > >>>>Nov 05 08:13:57.29: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:13:58.98: [27436]: --> [2:OK] > >>>>Nov 05 08:13:58.98: [27436]: REMOTE TSI > >>>> > >>>> > >>"5137719528" > >> > >> > >>>>Nov 05 08:13:58.98: [27436]: <-- [9:AT+FRH=3\r] > >>>>Nov 05 08:13:58.99: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:13:59.24: [27436]: --> [2:OK] > >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 9600 > >>>> > >>>> > >>bit/s > >> > >> > >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants A4 > page > >>>>width (215 mm) > >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants > >>>> > >>>> > >>unlimited > >> > >> > >>>>page length > >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 3.85 > >>>>line/mm > >>>>Nov 05 08:13:59.24: [27436]: REMOTE wants 2-D > MMR > >>>>Nov 05 08:13:59.25: [27436]: REMOTE wants T.30 > >>>> > >>>> > >>Annex > >> > >> > >>>>A, 256-byte ECM > >>>>Nov 05 08:13:59.25: [27436]: RECV training at > v.29 > >>>>9600 bit/s > >>>>Nov 05 08:13:59.25: [27436]: <-- > [10:AT+FRM=96\r] > >>>>Nov 05 08:13:59.59: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:14:01.09: [27436]: RECV: TCF 1808 > bytes, > >>>>0% non-zero, 1802 > >>>>zero-run > >>>>Nov 05 08:14:01.10: [27436]: --> [10:NO CARRIER] > >>>>Nov 05 08:14:01.10: [27436]: DELAY 75 ms > >>>>Nov 05 08:14:01.18: [27436]: TRAINING succeeded > >>>>Nov 05 08:14:01.18: [27436]: <-- [9:AT+FTH=3\r] > >>>>Nov 05 08:14:02.04: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:14:02.04: [27436]: <-- data [3] > >>>>Nov 05 08:14:02.04: [27436]: <-- data [2] > >>>>Nov 05 08:14:02.36: [27436]: --> [2:OK] > >>>>Nov 05 08:14:02.36: [27436]: <-- > [10:AT+FRM=96\r] > >>>>Nov 05 08:14:03.22: [27436]: --> [7:CONNECT] > >>>>Nov 05 08:14:04.92: [27436]: RECV received frame > >>>>number 0 > >>>>Nov 05 08:14:05.14: [27436]: RECV received frame > >>>>number 1 > >>>>Nov 05 08:14:05.35: [27436]: RECV received frame > >>>>number 2 > >>>>Nov 05 08:14:05.56: [27436]: RECV received frame > >>>>number 3 > >>>>Nov 05 08:14:05.78: [27436]: RECV received frame > >>>>number 4 > >>>>Nov 05 08:14:06.10: [27436]: RECV received frame > >>>>number 5 > >>>>Nov 05 08:14:06.31: [27436]: RECV received frame > >>>>number 6 > >>>>Nov 05 08:14:06.52: [27436]: RECV received frame > >>>>number 7 > >>>>Nov 05 08:14:06.74: [27436]: RECV received frame > >>>>number 8 > >>>>Nov 05 08:14:06.95: [27436]: RECV received frame > >>>>number 9 > >>>>Nov 05 08:14:07.16: [27436]: RECV received frame > >>>>number 10 > >>>>Nov 05 08:14:07.38: [27436]: RECV received frame > >>>>number 11 > >>>>Nov 05 08:14:07.70: [27436]: RECV received frame > >>>>number 12 > >>>>Nov 05 08:14:07.91: [27436]: RECV received frame > >>>>number 13 > >>>>Nov 05 08:14:08.12: [27436]: RECV received frame > >>>>number 14 > >>>>Nov 05 08:14:08.34: [27436]: RECV received frame > >>>>number 15 > >>>>Nov 05 08:14:08.55: [27436]: RECV received frame > >>>>number 16 > >>>>Nov 05 08:14:08.76: [27436]: RECV received frame > >>>>number 17 > >>>>Nov 05 08:14:08.98: [27436]: RECV received frame > >>>>number 18 > >>>>Nov 05 08:14:09.19: [27436]: RECV received frame > >>>>number 19 > >>>>Nov 05 08:14:09.40: [27436]: RECV received frame > >>>>number 20 > >>>>Nov 05 08:14:09.72: [27436]: RECV received frame > >>>>number 21 > >>>>Nov 05 08:14:09.94: [27436]: RECV received frame > === message truncated === __________________________________ Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*