 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Multitech DID Inbound
- To: "'Wendell Dingus'" <wendell@xxxxxxxxxxxxx>, "'Lee Howard'" <faxguy@xxxxxxxxxxxxxxxx>
- Subject: Re: [hylafax-users] Multitech DID Inbound
- From: Steve Tuckner <STUCKNER@xxxxxxxxxxxxx>
- Cc: hylafax-users@xxxxxxxxxxx
- Reply-to: Steve Tuckner <sat@xxxxxxxxxxxxx>
- Date: Fri, 5 Nov 2004 08:54:26 -0600
If you turn on the speaker (make sure ATM2 is set), do you hear the calling fax machine through the modem's speaker? Steve Tuckner Multi-Tech Systems > -----Original Message----- > From: hylafax-users-bounce@xxxxxxxxxxx > [mailto:hylafax-users-bounce@xxxxxxxxxxx]On Behalf Of Wendell Dingus > Sent: Thursday, November 04, 2004 8:09 PM > To: Lee Howard > Cc: hylafax-users@xxxxxxxxxxx > Subject: Re: [hylafax-users] Multitech DID Inbound > > > Quoting Lee Howard <faxguy@xxxxxxxxxxxxxxxx>: > > > On 2004.11.03 08:07 Wendell Dingus wrote: > > > > > I see this in /var/log/messages: > > > Nov 3 08:41:15 mail FaxGetty[8800]: ANSWER: CID NUMBER > "3210" NAME "" > > > Nov 3 08:41:23 mail FaxGetty[8800]: ANSWER: FAX > CONNECTION DEVICE > > > '/dev/ttyQ1a5' > > > Nov 3 08:42:10 mail FaxGetty[8800]: MODEM LT V.92 1.0 > MT5634ZBA-DID > > > SERIAL > > > DATA/FAX/DID MODEM VERSION 1.28C LT V.92 1.0 MT5634ZBA-DID Serial > > > Data/Fax/DID > > > Modem Version 1.28c/ > > > > What does the session log (/var/spool/hylafax/log/c*) say? > > > > Lee. > > > > > Thanks... I was only looking in /var/log and didn't even > think to look at any of > those logs, doh! Here's one: > > Nov 04 14:59:29.51: [ 8800]: SESSION BEGIN 000000032 19999999999 > Nov 04 14:59:29.51: [ 8800]: HylaFAX (tm) Version 4.2.0 > Nov 04 14:59:29.51: [ 8800]: <-- [4:ATA\r] > Nov 04 14:59:38.19: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:38.19: [ 8800]: ANSWER: FAX CONNECTION DEVICE > '/dev/ttyQ1a5' > Nov 04 14:59:38.19: [ 8800]: RECV FAX: begin > Nov 04 14:59:38.19: [ 8800]: <-- data [32] > Nov 04 14:59:38.19: [ 8800]: <-- data [2] > Nov 04 14:59:38.25: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:38.25: [ 8800]: <-- data [23] > Nov 04 14:59:38.25: [ 8800]: <-- data [2] > Nov 04 14:59:38.29: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:38.29: [ 8800]: <-- data [10] > Nov 04 14:59:38.29: [ 8800]: <-- data [2] > Nov 04 14:59:40.57: [ 8800]: --> [2:OK] > Nov 04 14:59:40.57: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 14:59:43.67: [ 8800]: --> [0:] > Nov 04 14:59:43.67: [ 8800]: MODEM <Empty line> > Nov 04 14:59:43.67: [ 8800]: <-- data [1] > Nov 04 14:59:43.69: [ 8800]: --> [2:] > Nov 04 14:59:43.69: [ 8800]: --> [2:OK] > Nov 04 14:59:43.69: [ 8800]: DELAY 1500 ms > Nov 04 14:59:45.19: [ 8800]: <-- [9:AT+FTH=3\r] > Nov 04 14:59:46.17: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:46.17: [ 8800]: <-- data [32] > Nov 04 14:59:46.17: [ 8800]: <-- data [2] > Nov 04 14:59:46.21: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:46.21: [ 8800]: <-- data [23] > Nov 04 14:59:46.21: [ 8800]: <-- data [2] > Nov 04 14:59:46.25: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:46.25: [ 8800]: <-- data [10] > Nov 04 14:59:46.25: [ 8800]: <-- data [2] > Nov 04 14:59:48.53: [ 8800]: --> [2:OK] > Nov 04 14:59:48.53: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 14:59:51.63: [ 8800]: --> [0:] > Nov 04 14:59:51.63: [ 8800]: MODEM <Empty line> > Nov 04 14:59:51.63: [ 8800]: <-- data [1] > Nov 04 14:59:51.65: [ 8800]: --> [2:] > Nov 04 14:59:51.65: [ 8800]: --> [2:OK] > Nov 04 14:59:51.65: [ 8800]: DELAY 1500 ms > Nov 04 14:59:53.15: [ 8800]: <-- [9:AT+FTH=3\r] > Nov 04 14:59:54.13: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:54.13: [ 8800]: <-- data [32] > Nov 04 14:59:54.13: [ 8800]: <-- data [2] > Nov 04 14:59:54.17: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:54.17: [ 8800]: <-- data [23] > Nov 04 14:59:54.17: [ 8800]: <-- data [2] > Nov 04 14:59:54.21: [ 8800]: --> [7:CONNECT] > Nov 04 14:59:54.21: [ 8800]: <-- data [10] > Nov 04 14:59:54.21: [ 8800]: <-- data [2] > Nov 04 14:59:56.49: [ 8800]: --> [2:OK] > Nov 04 14:59:56.49: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 14:59:59.59: [ 8800]: --> [0:] > Nov 04 14:59:59.59: [ 8800]: MODEM <Empty line> > Nov 04 14:59:59.59: [ 8800]: <-- data [1] > Nov 04 14:59:59.61: [ 8800]: --> [2:] > Nov 04 14:59:59.61: [ 8800]: --> [2:OK] > Nov 04 14:59:59.61: [ 8800]: DELAY 1500 ms > Nov 04 15:00:01.11: [ 8800]: <-- [9:AT+FTH=3\r] > Nov 04 15:00:02.09: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:02.09: [ 8800]: <-- data [32] > Nov 04 15:00:02.09: [ 8800]: <-- data [2] > Nov 04 15:00:02.13: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:02.13: [ 8800]: <-- data [23] > Nov 04 15:00:02.13: [ 8800]: <-- data [2] > Nov 04 15:00:02.17: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:02.17: [ 8800]: <-- data [10] > Nov 04 15:00:02.17: [ 8800]: <-- data [2] > Nov 04 15:00:04.45: [ 8800]: --> [2:OK] > Nov 04 15:00:04.45: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 15:00:07.55: [ 8800]: --> [0:] > Nov 04 15:00:07.55: [ 8800]: MODEM <Empty line> > Nov 04 15:00:07.55: [ 8800]: <-- data [1] > Nov 04 15:00:07.57: [ 8800]: --> [2:] > Nov 04 15:00:07.57: [ 8800]: --> [2:OK] > Nov 04 15:00:07.57: [ 8800]: DELAY 1500 ms > Nov 04 15:00:09.07: [ 8800]: <-- [9:AT+FTH=3\r] > Nov 04 15:00:10.05: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:10.05: [ 8800]: <-- data [32] > Nov 04 15:00:10.05: [ 8800]: <-- data [2] > Nov 04 15:00:10.09: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:10.09: [ 8800]: <-- data [23] > Nov 04 15:00:10.09: [ 8800]: <-- data [2] > Nov 04 15:00:10.13: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:10.13: [ 8800]: <-- data [10] > Nov 04 15:00:10.13: [ 8800]: <-- data [2] > Nov 04 15:00:12.41: [ 8800]: --> [2:OK] > Nov 04 15:00:12.41: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 15:00:15.51: [ 8800]: --> [0:] > Nov 04 15:00:15.51: [ 8800]: MODEM <Empty line> > Nov 04 15:00:15.51: [ 8800]: <-- data [1] > Nov 04 15:00:15.53: [ 8800]: --> [2:] > Nov 04 15:00:15.53: [ 8800]: --> [2:OK] > Nov 04 15:00:15.53: [ 8800]: DELAY 1500 ms > Nov 04 15:00:17.03: [ 8800]: <-- [9:AT+FTH=3\r] > Nov 04 15:00:18.01: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:18.01: [ 8800]: <-- data [32] > Nov 04 15:00:18.01: [ 8800]: <-- data [2] > Nov 04 15:00:18.05: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:18.05: [ 8800]: <-- data [23] > Nov 04 15:00:18.05: [ 8800]: <-- data [2] > Nov 04 15:00:18.09: [ 8800]: --> [7:CONNECT] > Nov 04 15:00:18.09: [ 8800]: <-- data [10] > Nov 04 15:00:18.09: [ 8800]: <-- data [2] > Nov 04 15:00:20.37: [ 8800]: --> [2:OK] > Nov 04 15:00:20.37: [ 8800]: <-- [9:AT+FRH=3\r] > Nov 04 15:00:23.47: [ 8800]: --> [0:] > Nov 04 15:00:23.47: [ 8800]: MODEM <Empty line> > Nov 04 15:00:23.47: [ 8800]: <-- data [1] > Nov 04 15:00:23.49: [ 8800]: --> [2:] > Nov 04 15:00:23.49: [ 8800]: --> [2:OK] > Nov 04 15:00:23.49: [ 8800]: RECV FAX: No answer (T.30 T1 timeout) > Nov 04 15:00:23.49: [ 8800]: RECV FAX: end > Nov 04 15:00:23.49: [ 8800]: SESSION END > > > ____________________ HylaFAX(tm) Users Mailing List > _______________________ > To subscribe/unsubscribe, click > http://lists.hylafax.org/cgi-bin/lsg2.cgi > On UNIX: mail -s unsubscribe > hylafax-users-request@xxxxxxxxxxx < /dev/null > *To learn about commercial HylaFAX(tm) support, mail > sales@xxxxxxxxx* > ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- References:
- Re: [hylafax-users] Multitech DID Inbound
- From: Wendell Dingus
- Re: [hylafax-users] Multitech DID Inbound
- Prev by Date: [hylafax-users] Missing pages
- Next by Date: Re: [hylafax-users] hylafax 4.20 modem empty line
- Previous by thread: Re: [hylafax-users] Multitech DID Inbound
- Next by thread: Re: [hylafax-users] Multitech DID Inbound
- Index(es):
Project hosted by iFAX Solutions