HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] capi4hylafax and Debian Sarge



Probably you need 2 things sharutils and metamail . Have you installed
these? 

Regards,
Guido Boeri   


Il mer, 2004-11-03 alle 19:34, Christian Lauinger ha scritto:
> Hugo Wau schrieb:
> > Mattia, 
> > here is how I have installed hylafax so far. Fax Forwarding by Email is
> > not yet functional, but maybe somebody may find what's wrong.
> > 
> > ############ root on debian sarge system ############
> > rmmod avmfritz
> > apt-get install alien checkinstall 
> > apt-get install dialog metamail 
> > cd /usr/src
> > 
> > wget 
> > ftp://ftp.avm.de/cardware/fritzcrd.pci/linux/suse.91/fcpci-suse9.1-3.11-02.tar.gz
> > 
> > tar -xzvf fcpci-suse9.1-3.11-02.tar.gz
> > cd fritz
> > make
> > 
> > cp /usr/src/fritz/src/fcpci.ko 
> > /lib/modules/2.6.7/kernel/drivers/isdn/capi
> > 
> > apt-get install isdnutils-base		(No Firmware to load)
> > apt-get install libcapi20-3
> > 
> > apt-get install capi4hylafax
> > 
> > nano /etc/isdn/capi.conf
> > ################################################	
> > # card file proto io irq mem cardnr options
> > fcpci - - - - - - -
> > ################################################
> > 
> > capiinit
> > capiinfo	(should show capi is active)
> > apt-get install hylafax-server hylafax-client
> > 
> > /usr/sbin/faxsetup
> > 	Should an entry be added for the FaxMaster to /etc/aliases? y
> > 	Users to receive fax-related mail? (your E-mail address or user)
> > 	Init script starts faxq: yes
> > 	Init Script starts hfaxd: yes
> > 	Start old protocol: no
> > 	Start paging protocol: no
> > 	Are these ok? 
> > 	All following questions: [yes]? 	yes
> > 	Should I run faxmodem for each configured modem? y
> > 
> > faxaddmodem
> > 	Serial port that modem is connected to? capi20.00
> > 	Country code? 49 (Deutschland)
> > 	Area code? 40 (Hamburg)
> > 	Phone number od fax modem? +4940111111111 (Beispiel)
> > 	Local identification string? Meine Firma (Beispiel)
> > 	Long distance dialing prefix? 0 (in Deutschl.)
> > 	International dialing prefix? 00 (in Deutschl.)
> > 	Dial string rules file? etc/dialrules
> > 	Tracing during normal server operation? 1
> > 	Tracing during send and receive sesions? 11
> > 	Protection mode for received facsimile? 0640
> > 	Protection mode for session logs? 0640
> > 	Protection mode for capi20.00? 0660
> > 	Rings to wait before answering? 1 
> > 	Modem speaker volume? off
> > 	Command line arguments to getty program? „-r -b %l“
> > 	Pathname of TSI access control list file? „“ (Leerstring)
> > 	Pathname of Caller-ID access control list file? „“ (Leerstring)
> > 	Tag line font file? etc/lutRS18.pcf
> > 	Tag line format string? „From %%l|%c|Page %%P von %%T“ 
> > 	Time before purging a stale UUCP lock file? 30
> > 	Hold UUCP lockfile during inbound data calls? Yes
> > 	Hold UUCP lockfile during inbound voice calls? Yes
> > 	Percent good lines to accept during copy quality checking? 95
> > 	Max consecutive bad lines to accept during copy quality check? 5
> > 	Max number of pages to accept in a received facsimile? 25
> > 	Syslog facility name for ServerTracing messages? daemon
> > 	Set UID to 0 to manipulate CLOCAL? „“
> > 	Use available priority job scheduling mechnism „“
> > 	Are these ok? y
> > 
> > nano /var/spool/hylafax/etc/hosts.hfaxd
> > ###########################################################
> > localhost:21::
> > 192.168.0.*:
> > ###########################################################
> > 
> > apt-get install exim4 exim4-base exim4-daemon-heavy
> > apt-get install sharutils metamail
> > touch /var/spool/hylafax/etc/FaxDispatch
> > chown faxmaster /var/spool/hylafax/etc/FaxDispatch
> > nano /var/spool/hylafax/etc/FaxDispatch
> > ############################################################
> > FILETYPE=pdf;
> > SENDTO=sengle@xxxxxxxxxxxx@orthhof.de;
> > MIMENCODE=bin/uuencode_it;
> > ############################################################
> > 
> > touch /var/spool/hylafax/bin/uuencode_it
> > chmod +xx /var/spool/hylafax/bin/uuencode_it
> > nano /var/spool/hylafax/bin/uuencode_it
> > ############################################################
> > #!/bin/sh
> > # /var/spool/hylafax/bin/uuencode_it
> > uuencode -m $1 $1 | grep -E -v "^begin|^====$" 2>/dev/null
> > ############################################################
> > 
> > /etc/default/hylafax should at least have these two lines:
> > ############################################################
> > USE_FAXGETTY=yes
> > RUN_HYLAFAX=1
> > ############################################################
> > 
> > Add this line to the end of /etc/inittab:
> > ############################################################
> > T5:23:respawn:/usr/bin/c2faxrecv
> > ############################################################
> > 
> > /var/spool/hylafax/etc/config.faxCAPI should at least have these lines:
> > ############################################################
> > SpoolDir: /var/spool/hylafax
> > FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd
> > PollRcvd Cmd: /var/spool/hylafax/bin/pollrcvd
> > FaxReceiveUser: uucp
> > FaxReceiveGroup: dialout
> > LogFile: /var/spool/hylafax/log/capi4hylafax
> > LogTraceLevel: 4
> > LogFileMode: 0600
> > {
> > 	HylafaxDeviceName: faxCAPI
> > 	RcvFileMode: 0660
> > 	FAXNumber: +49.00.00000
> > 	LocalIdentifier: „myFAX“
> > 	MaxConcurrentRecvs: 1
> > 	OutgoingController: 1
> > 	OutgoingMSN: 12345 (or your MSN)
> > 	SuppressMSN: 1
> > 	NumberPrefix: 
> > 	UseISDNFaxService: 0
> > 	RingDuration: 0
> > 	{
> > 	Controller: 1
> > 	AcceptSpeech: 1
> > 	UseDDI: 0
> > 	DDIOffset: 
> > 	DDILength: 3 
> > 	IncomingDDIs: 
> > 	IncomingMSNs: 12345,12346 (or your MSNs for Fax)
> > 	AcceptGlobalCall: 0
> > 	}
> > }
> > ############################################################
> > 
> > ciao
> > Hugo
> > 
> > 
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> > 
> > 
> Hi all,
> 
> I have the same problem as Hugo, no email-forwarding is done.
> 
> Greets
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions