Re: [hylafax-users] capi4hylafax and Debian Sarge

[Christian Lauinger <clauinger@xxxxxxxxxxxxxxxx>]

Hugo Wau schrieb:
> Mattia, 
> here is how I have installed hylafax so far. Fax Forwarding by Email is
> not yet functional, but maybe somebody may find what's wrong.
>
> ############ root on debian sarge system ############
> rmmod avmfritz
> apt-get install alien checkinstall 
> apt-get install dialog metamail 
> cd /usr/src
>
> wget 
> ftp://ftp.avm.de/cardware/fritzcrd.pci/linux/suse.91/fcpci-suse9.1-3.11-02.tar.gz
>
> tar -xzvf fcpci-suse9.1-3.11-02.tar.gz
> cd fritz
> make
>
> cp /usr/src/fritz/src/fcpci.ko 
> /lib/modules/2.6.7/kernel/drivers/isdn/capi
>
> apt-get install isdnutils-base		(No Firmware to load)
> apt-get install libcapi20-3
>
> apt-get install capi4hylafax
>
> nano /etc/isdn/capi.conf
> ################################################	
> # card file proto io irq mem cardnr options
> fcpci - - - - - - -
> ################################################
>
> capiinit
> capiinfo	(should show capi is active)
> apt-get install hylafax-server hylafax-client
>
> /usr/sbin/faxsetup
> 	Should an entry be added for the FaxMaster to /etc/aliases? y
> 	Users to receive fax-related mail? (your E-mail address or user)
> 	Init script starts faxq: yes
> 	Init Script starts hfaxd: yes
> 	Start old protocol: no
> 	Start paging protocol: no
> 	Are these ok? 
> 	All following questions: [yes]? 	yes
> 	Should I run faxmodem for each configured modem? y
>
> faxaddmodem
> 	Serial port that modem is connected to? capi20.00
> 	Country code? 49 (Deutschland)
> 	Area code? 40 (Hamburg)
> 	Phone number od fax modem? +4940111111111 (Beispiel)
> 	Local identification string? Meine Firma (Beispiel)
> 	Long distance dialing prefix? 0 (in Deutschl.)
> 	International dialing prefix? 00 (in Deutschl.)
> 	Dial string rules file? etc/dialrules
> 	Tracing during normal server operation? 1
> 	Tracing during send and receive sesions? 11
> 	Protection mode for received facsimile? 0640
> 	Protection mode for session logs? 0640
> 	Protection mode for capi20.00? 0660
> 	Rings to wait before answering? 1 
> 	Modem speaker volume? off
> 	Command line arguments to getty program? „-r -b %l“
> 	Pathname of TSI access control list file? „“ (Leerstring)
> 	Pathname of Caller-ID access control list file? „“ (Leerstring)
> 	Tag line font file? etc/lutRS18.pcf
> 	Tag line format string? „From %%l|%c|Page %%P von %%T“ 
> 	Time before purging a stale UUCP lock file? 30
> 	Hold UUCP lockfile during inbound data calls? Yes
> 	Hold UUCP lockfile during inbound voice calls? Yes
> 	Percent good lines to accept during copy quality checking? 95
> 	Max consecutive bad lines to accept during copy quality check? 5
> 	Max number of pages to accept in a received facsimile? 25
> 	Syslog facility name for ServerTracing messages? daemon
> 	Set UID to 0 to manipulate CLOCAL? „“
> 	Use available priority job scheduling mechnism „“
> 	Are these ok? y
>
> nano /var/spool/hylafax/etc/hosts.hfaxd
> ###########################################################
> localhost:21::
> 192.168.0.*:
> ###########################################################
>
> apt-get install exim4 exim4-base exim4-daemon-heavy
> apt-get install sharutils metamail
> touch /var/spool/hylafax/etc/FaxDispatch
> chown faxmaster /var/spool/hylafax/etc/FaxDispatch
> nano /var/spool/hylafax/etc/FaxDispatch
> ############################################################
> FILETYPE=pdf;
> SENDTO=sengle@xxxxxxxxxxxx@orthhof.de;
> MIMENCODE=bin/uuencode_it;
> ############################################################
>
> touch /var/spool/hylafax/bin/uuencode_it
> chmod +xx /var/spool/hylafax/bin/uuencode_it
> nano /var/spool/hylafax/bin/uuencode_it
> ############################################################
> #!/bin/sh
> # /var/spool/hylafax/bin/uuencode_it
> uuencode -m $1 $1 | grep -E -v "^begin|^====$" 2>/dev/null
> ############################################################
>
> /etc/default/hylafax should at least have these two lines:
> ############################################################
> USE_FAXGETTY=yes
> RUN_HYLAFAX=1
> ############################################################
>
> Add this line to the end of /etc/inittab:
> ############################################################
> T5:23:respawn:/usr/bin/c2faxrecv
> ############################################################
>
> /var/spool/hylafax/etc/config.faxCAPI should at least have these lines:
> ############################################################
> SpoolDir: /var/spool/hylafax
> FaxRcvdCmd: /var/spool/hylafax/bin/faxrcvd
> PollRcvd Cmd: /var/spool/hylafax/bin/pollrcvd
> FaxReceiveUser: uucp
> FaxReceiveGroup: dialout
> LogFile: /var/spool/hylafax/log/capi4hylafax
> LogTraceLevel: 4
> LogFileMode: 0600
> {
> 	HylafaxDeviceName: faxCAPI
> 	RcvFileMode: 0660
> 	FAXNumber: +49.00.00000
> 	LocalIdentifier: „myFAX“
> 	MaxConcurrentRecvs: 1
> 	OutgoingController: 1
> 	OutgoingMSN: 12345 (or your MSN)
> 	SuppressMSN: 1
> 	NumberPrefix: 
> 	UseISDNFaxService: 0
> 	RingDuration: 0
> 	{
> 	Controller: 1
> 	AcceptSpeech: 1
> 	UseDDI: 0
> 	DDIOffset: 
> 	DDILength: 3 
> 	IncomingDDIs: 
> 	IncomingMSNs: 12345,12346 (or your MSNs for Fax)
> 	AcceptGlobalCall: 0
> 	}
> }
> ############################################################
>
> ciao
> Hugo
>
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Hi all,

I have the same problem as Hugo, no email-forwarding is done.

Greets


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*