[hylafax-users] Problem about a receive fax

["hylafax" <hylafax@xxxxxxxxxxxx>]

Hi,

i'm from Italy and i'm sorry for my bad english.

 

I have a problem with hylafax 4.2.0 concerning the reception of fax.

 

Only some fax come to me correctly visualize, while others are visualized to me like pages all black ones.

 

You bringing back here the log of the error:

 

Oct 08 21:56:08.17: [ 1452]: SESSION BEGIN 000000010 003904423456
Oct 08 21:56:08.17: [ 1452]: HylaFAX (tm) Version 4.2.0
Oct 08 21:56:08.17: [ 1452]: <-- [13:AT+FCLASS=1A\r]
Oct 08 21:56:13.47: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:13.47: [ 1452]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Oct 08 21:56:13.47: [ 1452]: RECV FAX: begin
Oct 08 21:56:13.48: [ 1452]: <-- data [32]
Oct 08 21:56:13.49: [ 1452]: <-- data [2]
Oct 08 21:56:13.54: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:13.54: [ 1452]: <-- data [23]
Oct 08 21:56:13.54: [ 1452]: <-- data [2]
Oct 08 21:56:14.26: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:14.26: [ 1452]: <-- data [10]
Oct 08 21:56:14.26: [ 1452]: <-- data [2]
Oct 08 21:56:16.44: [ 1452]: --> [2:OK]
Oct 08 21:56:16.44: [ 1452]: <-- [9:AT+FRH=3\r]
Oct 08 21:56:17.25: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:18.85: [ 1452]: --> [2:OK]
Oct 08 21:56:18.85: [ 1452]: REMOTE TSI "39347123456"
Oct 08 21:56:18.85: [ 1452]: <-- [9:AT+FRH=3\r]
Oct 08 21:56:18.87: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:19.17: [ 1452]: --> [2:OK]
Oct 08 21:56:19.17: [ 1452]: REMOTE wants 9600 bit/s
Oct 08 21:56:19.17: [ 1452]: REMOTE wants A4 page width (215 mm)
Oct 08 21:56:19.17: [ 1452]: REMOTE wants unlimited page length
Oct 08 21:56:19.17: [ 1452]: REMOTE wants 7.7 line/mm
Oct 08 21:56:19.17: [ 1452]: REMOTE wants 1-D MH
Oct 08 21:56:19.17: [ 1452]: RECV training at v.29 9600 bit/s
Oct 08 21:56:19.17: [ 1452]: <-- [10:AT+FRM=96\r]
Oct 08 21:56:19.79: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:21.77: [ 1452]: RECV: TCF 1892 bytes, 4% non-zero, 1799 zero-run
Oct 08 21:56:21.78: [ 1452]: --> [10:NO CARRIER]
Oct 08 21:56:21.78: [ 1452]: DELAY 75 ms
Oct 08 21:56:21.86: [ 1452]: TRAINING succeeded
Oct 08 21:56:21.86: [ 1452]: <-- [9:AT+FTH=3\r]
Oct 08 21:56:22.07: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:22.07: [ 1452]: <-- data [3]
Oct 08 21:56:22.07: [ 1452]: <-- data [2]
Oct 08 21:56:23.24: [ 1452]: --> [2:OK]
Oct 08 21:56:23.24: [ 1452]: <-- [10:AT+FRM=96\r]
Oct 08 21:56:24.74: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:24.74: [ 1452]: RECV: begin page
Oct 08 21:56:43.84: [ 1452]: RECV: 1014 total lines, 4 bad lines, 1 consecutive bad lines
Oct 08 21:56:43.84: [ 1452]: RECV: end page
Oct 08 21:56:43.84: [ 1452]: --> [10:NO CARRIER]
Oct 08 21:56:43.84: [ 1452]: <-- [9:AT+FRH=3\r]
Oct 08 21:56:50.51: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:51.65: [ 1452]: --> [2:OK]
Oct 08 21:56:51.65: [ 1452]: RECV recv EOP (no more pages or documents)
Oct 08 21:56:51.65: [ 1452]: <-- [9:AT+FRS=7\r]
Oct 08 21:56:51.86: [ 1452]: --> [2:OK]
Oct 08 21:56:51.86: [ 1452]: <-- [9:AT+FTH=3\r]
Oct 08 21:56:52.16: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:52.16: [ 1452]: <-- data [3]
Oct 08 21:56:52.16: [ 1452]: <-- data [2]
Oct 08 21:56:53.34: [ 1452]: --> [2:OK]
Oct 08 21:56:53.34: [ 1452]: RECV send MCF (message confirmation)
Oct 08 21:56:53.34: [ 1452]: RECV FAX (000000010): from 393479026826, page 1 in 0:32, INF, 7.7 line/mm, 1-D MH, 9600 bit/s
Oct 08 21:56:53.34: [ 1452]: RECV FAX (000000010): recvq/fax000000009.tif from 39347123456, route to <unspecified>, 1 pagesin 0:40
Oct 08 21:56:53.35: [ 1452]: <-- [9:AT+FRH=3\r]
Oct 08 21:56:54.50: [ 1452]: --> [7:CONNECT]
Oct 08 21:56:55.37: [ 1452]: --> [2:OK]
Oct 08 21:56:55.37: [ 1452]: RECV FAX: bin/faxrcvd "recvq/fax000000009.tif" "ttyS0" "000000010" "" "" ""
Oct 08 21:56:55.37: [ 1452]: RECV FAX: end
Oct 08 21:56:55.37: [ 1452]: SESSION END

 

I hope you can resolve my problem

thank you

 

Michele84