HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] problem sending fax - busy signal



Hi, I have a linux box (debian woody) with
a hylafax 4.11.

For the moment I use hylafax for receive fax only and it works fine.
Now i have tried to send fax using WHFC and printer drivers hylafax software.
I have done all the setup config, user, password ... and other but when I try to send
a fax to any destination i receive an "busy signal error".
I use the same modem for sending/receiving faxes.


How can i debug this problem ?
Thanks a lot.

this is the output:

Oct 12 13:02:13.32: [18659]: SESSION BEGIN 00002131 xxxxxxxxxxxxx
Oct 12 13:02:13.32: [18659]: HylaFAX (tm) Version 4.1.1
Oct 12 13:02:13.32: [18659]: SEND FAX: JOB 1 DEST xxxx COMMID 00002131 DEVICE '/dev/ttyS0'
Oct 12 13:02:47.38: [18659]: SEND FAILED: JOB 1 DEST xxxx ERR Busy signal detected
Oct 12 13:02:47.63: [18659]: SESSION END


in the info folder i found a file with:

supportsHighRes:yes
supports2DEncoding:yes
supportsPostScript:no
calledBefore:no
maxPageWidth:2432
maxPageLength:-1
maxSignallingRate:"14400"
minScanlineTime:"0ms"
remoteCSI:""
sendFailures:0
dialFailures:1
lastDialFailure:"Busy signal detected"
&pagingProtocol:"ixo"



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions