HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Receive T.30 T2 timeout



On 2004.09.14 20:17 Eric Shubes wrote:

Sep 14 17:42:38.52: [22544]: <-- [7:AT+FDR\r]
Sep 14 17:42:39.97: [22544]: --> [5:+FCFR]
Sep 14 17:42:39.97: [22544]: --> [28:+FTSI:" xxx xxx 0222"]
Sep 14 17:42:39.97: [22544]: REMOTE TSI "xxx xxx 0222"
Sep 14 17:42:39.97: [22544]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
Sep 14 17:42:39.97: [22544]: REMOTE wants 14400 bit/s
Sep 14 17:42:39.97: [22544]: REMOTE wants A4 page width (215 mm)
Sep 14 17:42:39.97: [22544]: REMOTE wants unlimited page length
Sep 14 17:42:39.97: [22544]: REMOTE wants 3.85 line/mm
Sep 14 17:42:39.97: [22544]: REMOTE wants 2-D MR
Sep 14 17:42:48.90: [22544]: --> [8:+FHNG:73]
Sep 14 17:42:48.90: [22544]: REMOTE HANGUP: T.30 T2 timeout, expected page not received (code 73)

Class2RecvDataTrigger: "\022" # character sent to modem to start recv

(Help, oh Lee one!)

(I'm reminded of a certain holographic projection that R2-D2 played for Luke, Threepio, and Ben... "you're our only hope"...)


Try:

Class2RecvDataTrigger: "\021"

That's just a guess, though. In any case, I would recommend switching to Class 1 if the modem supports it. If not, then you may need to contact the manufacturer to see if they know the configuration problem or if there is an updated firmware available.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




Project hosted by iFAX Solutions